Find skilled builders in NSW

New shed installed on flat ground. Will need base as well - needs to be organised by contractor. Shed in photo has arrived in flatpack.

Fully demolish and remove a Colorbond shed (roughly 3m x 6m) – roof, walls & everything attached. • Remove pergola roof, beams and frame (approx 3.5m x 6m). • Demolish a concrete BBQ and 2 old solid core doors. - Remove mid size Jasmine tree including root(as pictured) • Take all waste to the dump or recycling. • Leave the area swept, clean, and completely tidy with no mess left behind.

Looking for an experienced handyman or tradesperson to replace pergola roof sheets at my property. Job Details: Remove existing pergola roofing sheets (old/worn) Supply and install new sheets (polycarbonate or similar – open to suggestions) Ensure proper fitting, sealing, and weatherproofing Clean up and dispose of old materials Location: Quakers Hill Access: Easy access to backyard Timing: Flexible, preferably within the next 1–2 weeks Pergola Details: Attached to house (see photos) Medium size backyard pergola Timber frame in good condition (only sheets need replacement) Looking For: Someone with prior experience in pergola/roof sheet installation Must bring own tools Please include quote (labour + materials or labour only) Photos attached for reference.

5x3 wall mounted pergola system with manual louvers from Cosy Deals installation is into a paved courtyard.

Pargola is bent want to get it fixed and realigned

Need to assemble garden shed

"Demolition" & tip run - take down wardrobe and large wooden bed platform to recycle timber or to run to the tip.

I need an insulated pergola installed over a deck and a colourbond pergola installed over a section with pavers

Looking for someone to excavate a small amount of additional dirt from our driveway in preparation for some roadbase. We’re looking for someone who can create a neat edge and ensure the ground is level.

Set up easy shed (3m x 3m) on cement slab

Moving house and need to disassemble Vuly trampoline to store and disassemble and reassemble shed

Need to remove old colorbond and timber. Need new timber and colorbond. The mud room needs an extension roof to put a screen door.

Floors need to be tiled or epoxied. I need all materials and labour included in the job. Pergola size is 4880mm x 3750mm

Finish the installation of shed install padlock and door braces. Should be a quick job. Must be done by midnight Sunday 22 March

Demolition of a bathroom Hourly paid (eg 6-8 hours) White card and ABN needed

Need labour to help with demolition. Preferably two young fit people. Offer is hourly rate.

Looking for someone to paint the timber beams and frame of my outdoor patio/pergola. Paint will be supplied. Only the timber beams and structure need painting — not the polycarbonate roof sheets. The patio runs along the house and has multiple beams/rafters (see photos). Work is overhead so ladder access will be required. Scope: • Paint all timber beams and supports • Careful cutting around the polycarbonate roofing panels • Ideally 2 coats depending on coverage Area will be cleared before work.

Re-fix 3.5 metre x 4 cm X 4 cm hardwood purlin to pergola, with stainless steel screws, old screws broken, check screws on others.

Garden shed demolition of a small old shed Take away all rubbish including the whole old shed Take away all rubbish inside the old shed so that is nothing left behind We need someone that will be careful with rubbish removal as we just refurbished the entire pathway in the front yard we do not want this damaged please

I have new driveway stainless gutter partiakly installed - its bottom embedded in concrete. It is 4.5m long and 250mm wide. It consists if 5 joints and 5 grills on top. The edges of them do mot quute match to eash other. I want the edjes bent bit and welded together, so they look nice. We can put some patch on the outside to make it stronger. Also need to weld stainless bolts/handles on the sides to be embedded in concrete, so the edges stick to concrete and do not push on the grills. II gave my estimate based on 3h job. I will pay more if we need more time. On the other hand, if you finish earlier I have other similar tasks to weld to use my 3h. I will be helping you. We can discuss details over the phone. This is a frontyard job, so it has to look nice. I expect you having over 2 years experience doing stainless weldings, and a proper welder and other welding tools. The quote should include your consumables like gas and stainless wire. I have 10A power points nearby.