Find wood fencing professionals in VIC

Fence repair and new fence

Require Posts 2 metres from ground level into ground for wall cladding. length is 13 metres so approx 1.5 metres apart across 13 metres

Need to fix one wooden post and attach the fence

We need an old wooden fence replaced with colourbond. The length of the fence is 7.23m.

Need a wooden gate installed at the side of the property.gap is measuring 123 cm. I dont have pictures of the gaye as i haven’t bought one yet, ideally someone who has stock of one would be great

There is old wooden fence required removal and put new colorbond fence

The corner section of the fence has come loose and separated from the adjoining panel (see photos). Likely needs realignment and reattachment using brackets or screws. A few palings may also need to be re-secured or replaced. Access is easy from both sides of the fence.

Garden wooden fence of approx 19.1m long and 1.8m with cap had given way at 3 sections of the fence. 1. need to demolish the fance 2. remove the old fence 3. install a new fence per the phots of 19.1m (approx) 1.8m High with cap using all new posts for fencing works are hardwood posts (not cypress pine posts) of 125mm x75mm, and 75mm x 50mm (recess fitted – three rail set up) and 4. remove the old fence and rubbish associated with the fence Photo Notes 1- first photo shows 3 segments with single post collopsed. The part behind the shed is the post shared by 3 houses is still standing. Nothice that after the 3 collapsed segment, remaining fence that is still standing 2- second photo show that after the 3 collapsed segment, the reamining segments have not fallen. While the corner post is still intact, it might need a bit of clean up to attach new fence to it.

Remove and install wooden post on veranda. One has been done already, i need others to be replaced. Materials will be supplied

I need 3-5 wood panels reattached to the fence

Installation of wooden street library. Requirement of post securely into the ground

Our paling fence needs some repairs after recent wind damage. A couple of railings have become disconnected from the upright and one of the uprights is wobbly. About 5m in total have been affected. The adjoining land has been cleared and is awaiting rebuilding, so we are after some temporary repairs to ensure privacy and that the fence is secure for our dog.

- install pool barrier and gate total 6m, materials supplied , location : Ashwood VIC , more other odd jobs for fencing and gates, pool compliance job , any add ons can discuss further

We need our fence plinths repaired or additional installed as we have gaps under our fence in Richmond in two fence sections. See photos

Install wooden gate between side of house and fence. We will provide the gate, the handle/ lock, and the support posts.

The wooden panels in photos (it is an inner or secondary boundary fence) require a scraping firstly & then a light sand. A primer has been applied to the slats already to loosen the product. Fence dimensions approx 2.5m x 12m + an additional 8 panel length in last photo which is approx 5m long. The additional 8 panel length has already been scraped - only needs a sand. Any day from tomorrow

Fence has a major lean due to tree roots (now removed). It will need additional posts in concrete added to it (tightening up the current posts has not done the job).

Fence needs fixing. Damaged posts x 3. Rotten. Rails and pailings fine.

I have a fence/gate that has access to my courtyard and the wood panels are falling off because of rotting wood. I just need a few panels replaced. Eventually I will replace the whole thing, but just need a few panels replaced in the interim.

Need a fence fixed, gate fixed and gate stopper reattached. All as per photos. Need to supply and cut wood. Nil painting required.