Find professional window and door services in Sydney Eastern Suburbs

Repair loose door hinge and resecure door to frame Looking for an experienced handyman or carpenter to securely reattach an internal door hinge to the door frame. The upper hinge screws have pulled out of the frame, leaving the hinge detached. Photos attached show the door and affected area. Work required: * Repair or reinforce the existing screw holes as needed. * Securely refit the hinge using suitable screws. * Check the remaining hinges and adjust the door so it opens, closes and latches properly. * Leave the area clean and tidy. Please bring your own tools and include screws, materials and labour in your quote. Please advise your earliest availability.

There is a hole on the fly door, so need to get the mesh replaced

I'm looking for someone to fix a balcony French door that was damaged in strong winds. The top bolt has torn out of both the door frame and the door itself: • The timber around the strike plate in the top of the frame has split and torn out • The top of the door is also split around the bolt plate, and one screw has pulled out It needs both areas repaired, the bolt and strike refitted securely, and a quick paint touch-up. Photos attached. I'm looking for an affordable price. Please include materials in your offer. Thanks.

Fix up the panel that has come away from door frame. Believe it might be aluminium. Brand is ‘Roto’ door frame

Need two new doors measured, painted and installed for office and bedroom. Have existing paint. Can get exact door measurements as previous ones still there, just want new ones to replace them.

the door roll hinges on the top of the laundry broke. The door hinges are also all broken. One half side of the door is out. Needs to be fixed.

I have a handle that is too big for the hole for it in my pantry door. As such, it may need a hole saw or something.

The bathroom door hinge screws have come loose and no longer grip properly in the door frame. The timber around the hinge is damaged and cracked, with the existing screw holes worn out. Only for the top hinge, bottom hinge appears to be fine Looking for someone experienced in carpentry or handyman repairs to repair and reinforce the damaged door frame so the hinge can be securely reattached and the door operates properly. Please bring the necessary tools and materials. Ideally, the repair should be durable rather than simply putting the screws back into the existing holes. I’ve attached a photo of the damage. Thanks!

Front door and handle is tight when twisting to open. Handle sometimes jams halfway even when unlocked

One side of a sliding door pane has come loose and needs to be tightened up.

- Paint a bedroom wardrobe in white (we have the paint) - Paint a folding door in white (we have the paint) - Paint the inside of a small cardboard - Paint a small section of a wall - Change two pendants (new pendants supplied) - Cut some existing shelves bought at Bunnings to make them fit a wardrobe (the length and width are already correct, but some small adjustments need to be made) The paint does not need to be done professionally, the paint can applied directly on the wood as is. Please reach out if you have any questions.

- install 2 x wall hooks in brick wall for prints - hang Dyson bracket, and move existing mop bracket to faciliate - measure up to hang outdoor festoon lights. Purchase appropriate ones from Bunnings and hang (ready for Electrician to install). - move wall brackets up slightly so out of the way of the door - fix bed frame - was taken apart to do floors, and is sinking. I think it hasn’t been screwed back together properly (very new bespoke frame, so not broken). Price for labour and time - cost for lights will be payable in addition

Put bedroom door back on hinges

Looking for someone to locate the correct door hinges and install. I will obviously pay for the door hinges that need to be purchased.

Need my Garage door and the side of the door (wall panted) has to be the beige/cream colour next to it Will provide paint Need to be proffesional done I will not be providing any equipment that is your expense. Thank you location double bay

Shower screen came off its tracks, rollers probably need to be replaced. Also, the bottom guide hooks have come off.

Patch repair (there may be some minor movement in one section, noted below). Three areas: 1. Hole/damaged corner next to window — needs proper build-up, not just a surface fill. FYI when I press against the window head (horizontal surface of the window architrave next to the window frame), it moves slightly. 2. Crack going up the wall around vent (5-7mm wide approx, varies by area). 3. Cracks along where ceiling meets wall (cornice line). No need to paint — just want it filled and finished ready for me to paint separately.

wardrobe door hanging to be fixed

I have a lever door handle that repeatedly comes off the spindle. This has been happening since the handle was brand new, so it appears the spindle isn’t holding/securing the handle correctly rather than being an issue caused by wear over time. The mounting plate appears to be securely attached to the door. I’m looking for someone experienced with door hardware to: * Diagnose why the handle keeps coming off * Permanently fix the issue, rather than simply refitting/tightening the handle * Replace the spindle or any other components if required * Ideally retain the existing brass handle and hardware Happy to pay for any replacement parts required in addition to the job price. Photos attached showing the handle, spindle and mounting plate.

***Flexible with time, but bonus if you can do it this afternoon*** Drill holes and screw in the climbing holds onto 2 plywood boards, and attach the boards to an internal brick wall. We have the holds, the plywood and the backings. One of the boards will need to be trimmed as the boards are 120cm wide and the wall is 220cm wide. You would need your own equipment, screws and wall plugs for the instillation. The holds come with their own t-nuts and screws.