Find professional window and door services in Norwood SA

Ensuite cavity slider/pocket door off rails

Replace front entry door and security screen door I need an experienced installer to supply and replace my existing wood-core front entry door and security screen door, including all fitting, finishing and disposal. My unit is on Level 1 and access is through stairs. The job includes: * Remove and dispose of both existing doors. * Supply and install a new wood-core entry door, prepared and painted white on both sides and all edges. * Supply and install a new security screen door with insect mesh. * Remove the existing locks from both doors and reinstall them in the new doors. * Fix or replace strike plates to ensure both doors latch and lock securely. * Fit all necessary hinges, insect seals, weather seals and other required hardware. * Ensure both doors are properly aligned, operate smoothly and seal properly to keep insects out. * Clean up and remove all waste after completion. Photos of the existing doors and measurements are attached. Please verify the measurements before supplying the new doors. Please include the full cost of supply, installation, painting, hardware and disposal in your offer, along with your availability. I’m ready to assign the task to a suitable installer who can provide similar looking replacements to the doors already installed. Measurements of the Solid Woodcore Door : Width: 0.81m and Height: 2.03m Thickness:35mm Measurements of the Screen Door Width: 0.85m 2.04m Thickness: 20mm

Need replacing outside laundry door. Want a door with glass. Take off and remove old door and also need new hinges and locks

Fix door so that it closes. Cannot remove door from hinges. Work to be done as it’s hung.

The shower door has dropped and has pulled one of the side panels away from it’s grouting. The side panel needs to be reaffixed and the door realigned back into the correct position. The glass panels are heavy!

Crack in bedroom door , need filling and paint

Need someone to put together a new Weber bbq and put an lock on a bathroom door

We need to split one 6.25 m² office into two. Install a 2.5 m (H) × 2.5 m (L) Rondo steel-stud & track partition (WD05), fill with 50 mm Fletcher Pink® R-1.2 insulation, line with flush-jointed 13 mm USG Boral Sheetrock HD (WL01) and Soundstop (WL02) plasterboard, paint with Dulux Enviro2 undercoat + two coats Wash&Wear Low Sheen, and hang a 2.5 m-high silver aluminium door + Metinno Series 3000 glazing. All materials on-site; start Fri 5 pm, finish Mon 8 am; broom-clean handover. Scope of Work Framing: Rondo steel studs 64/92 mm, 0.55 mm BMT Insulation: Fletcher Pink® Partition 14 batt, 50 mm Plasterboard: WL01: Sheetrock HD 13 mm (standard impact) WL02: Soundstop 13 mm (acoustic) Paint: Dulux Enviro2 undercoat; two coats Wash&Wear Low Sheen Doors & Glazing: Metinno Series 3000; 2.5 m aluminium door + matching windows per drawings Clean-Up: Flush trims, no dust or paint splatter; broom-clean site Your Credentials & Quote Trade-qualified in commercial partitions, plasterboard, insulation & glazing Own all tools, materials & fixings Supply photos/references of similar WD05 projects Available Fri 5 pm–Mon 8 am To Apply: Fixed project price (materials + labour) or hourly rate + estimate Confirmation you can source all specified products Examples of past partition & fit-out jobs

Need someone to put a lock up on our front door and also need someone to put screws in a wall to hang a whiteboard. We have all the screws

Application of a bead of silicone along the top horizontal edge of a first floor (external) window frame. Job will need an extension ladder; window is approx, 7-8M off the ground. Window frame is no longer than 3.5M. Job is required to seal a gap between the house wall and the window frame, to stop rainwater leaking into the room behind.

Need someone to install a bifold solid wood bedroom door

Shed door unable to close as metal gate fitting has come loose from a Heeble wall and needs to be tightened up or taken off and then reattached so door/gate and catch on post are aligned.

Widening door way by cutting back all-in-one doorframe to be flush with the wall

I need a lock installed into a wooden door so it will need to be cut Into the door. I need some bushes cut down in my walk way and removed. A small but of rubbish removed from the area also.

I have set of large glass and aluminum French doors that open inwards, I want to modify these doors so that they open outwards. Tasks involves removing door from existing configuration, aligning and installing existing doors in new configuration. I also need to change the configuration of the lock and, if possible, the handles.

Single motorised roller door to be taken down carefully as will need replacing when carport is fixed

My cavity hung sliding door was making a terrible noise for a few days then it has just dropped and I can’t open it.

I had carpet put into a room and it raised the floor by around 2cm to 3cm, therefore the door does not fit. I need someone to shorten door marginally without damaging the door and then screwed back into the door. I imagine a saw would be the right tool but however is easiest.

We need two fly screens fixed as they have come loose. They are metal fly screens.

I require an aluminium screen door replaced and installed