Find professional window and door services in Lane Cove

Repair a crack on a vintage wooden door

Can someone help me repair this door and wall

Hi, I want to replace the existing old aluminium flyscreen doors that I have on my balcony. See photo attached. I would like new aluminium flyscreen doors in black installed with a dog door in one of the Flyscreens (preferably the left side). The dog door to use would be the Black Petway Medium size. Flexible on installations date, please quote based on supplying the new doors, dog door and installation. Full length of doors is approx 4.6m.

We need to be a standard door rehung to swing the other way. Door jam is almost exactly symmetrical so we expect it to be an easy. We might need to get 1-2 mil shaved off the door.

Fibreglass fly screen and PVC spline supplied. Only require installation for 3 x doors.

2×door stoppers installation drilling needed

Mesh on three flyscreen doors need to be replaced.

Issue with Glass Sliding Door:    •   Door is not locking properly.    •   Door does not roll smoothly – rollers likely need replacement.    •   Rubber wedges/seals around the glass need replacing.

1. Replace the sliding door, instal a secure lock on new door 2. Replace or repair the bedroom door, currently the door touches ground, couldn't move 3. Get rid off the window timber seat, change it to a desk (instal a white panel as table top)

It's hard to open and not smooth. I've attempted to adjust wheels and also they seem fine.

Need a space measured for a new screen door. Open to offers!

Sliding door broke, unsure what needs to be done. Msg for more info

Hi! Need new internal laundry door and hardware installed. Door supplied waiting at site. Opening for the door is 2030x685x38 and size of door is 2040X690 X35MM so there will be trimming involved. I will supply hinges and hardware.

Put a new locker on the garage door.

Commercial Project. x7 Cabins with fly screen sliding doors requiring door stops. We have other small task required so if you are a skilled handyman would be preferred

Replace sliding door wheels on one door. Double glazed doors

1. Need hole for door knob cut or drilled out. I have new replacement door knob but the original knob is old type only needed small hole in door, replacement is more modern type that needs a full hole . Need the hole cut/drilled and might as well fit the knob while you are there. 2. I have a security bolt (is two screws/bolts) I want installed on an internal brick plastered (I think) wall. Photo of the instructions attached. I had one fitted elsewhere years ago and drill slightly came through other side of wall so want to avoid that this time if possible (or patch up other side if must which we did last time, was not much).

We need someone to install the door and refit the door lock. The new door is slightly bigger than the doorframe so will need some adjustment - approx 10mm both sides. Optional extra task to add the dog flap shown in the photo.

Hi! Need new internal laundry door hung and hardware installed. Door supplied waiting at site. Opening for the door is 2030x685x38 and size of door is 2040X690 X35MM so there will be trimming involved. I will supply hinges and hardware. https://www.zanda.com.au/product/epic-matt-black-door-handle/

Door handle and its base need to screw it !! Photo frame hook need med to brick wall