Find trusted waterproofing contractors in West Melbourne

Looking for a licensed waterproofer for a bathroom renovation in Hoppers Crossing. Bathroom floor area is approximately 9m². Waterproofing required for: • Entire bathroom floor • Shower area • Around the vanity area • Bathtub area • Toilet area Waterproofing must be completed in accordance with Australian Standards and include all required joints, corners, wall-to-floor junctions, and penetrations. Please provide: • Your quote • Licence details (if applicable) • Whether a waterproofing certificate can be provided upon completion • Approximate availability

I require an experienced bathroom renovator, waterproofer, plumber, or tiler to inspect and provide a quote for a shower waterproofing issue at a residential property in Werribee VIC. The building and pest inspection identified the following: Cracked shower base Deteriorated grout to shower floor tiles Missing tile near shower entrance Peeling sealant Water stains on adjacent walls Possible waterproofing failure I would like an onsite inspection to determine: Whether the issue can be repaired through regrouting, resealing, and tile repairs. Whether the shower waterproof membrane has failed. Whether a partial shower rebuild or full shower rebuild is required. The recommended scope of works and cost. Please provide: Relevant experience with shower waterproofing repairs. Licence details (if applicable). Photos of similar completed work. Separate pricing for inspection and repair works. Property is located in Werribee VIC.

I want get the waterproofing for new shower area.

Shower repair needed due to grout failure and water damage behind tiles. Looking for a tiler who can waterproof to assess, quote and complete repair if possible (remove affected tiles, replace damaged sheeting, re‑waterproof and retile). 1sqm or less. We have the tiles already. Ignore the price, seeking quotes!

Hi, I’m a professional waterproofing specialist based in Melbourne, providing high-quality waterproofing solutions for bathrooms, balconies, laundries and all internal/external wet areas. With a strong focus on workmanship and attention to detail, I ensure every project is completed to a high standard and fully compliant with Australian waterproofing standards. I specialise in: Bathroom waterproofing (showers, floors & walls) Balcony and terrace waterproofing Laundry & wet area systems Internal and external membrane applications Leak prevention and remedial waterproofing I use premium, industry-trusted products including GRIPSET waterproofing systems to ensure long-lasting protection and durability. I pride myself on being: Reliable and punctual Clean and professional on site Easy to communicate with Focused on quality over shortcuts Free inspections and quotes available across Melbourne. Available for both small residential jobs and larger renovation projects. Fully ABN registered and committed to delivering waterproofing that lasts. I treat every job as if it were my own property. Budget is flexible and final price will be quoted after site inspection

Existing tiled shower base needs waterproof for base. Remove tiles, waterproof base, re-tile shower or install polymarble shower base. Will require removal and re-install of shower screen. Shower base 930cmx1300cm

Two bathrooms at a property in Thonhill Park/Rockbank need shower waterproofing remediation. Scope: rake out and regrout shower tiles, apply liquid membrane over grout lines, re-silicone all internal corners and shower screen junctions in both showers. Also need plaster make-good on adjacent damaged walls (cut out, patch, set, sand) and repaint affected sections to match. Photos available on request. Licensed waterproofer preferred.​​​​​​​​​​​​​​​​

Need to check the damp area, perform waterproofing and sealant work of 2 bathrooms shower area

Bathroom waterproofing and tiling Room size is 2.5 x 2.8 m It needs waterproofing, and under floor heating installed, then tiling. I’m looking at 900 x 900 tiles for floor and one wall. The other walls will be 1200 x 600 tiles. Part of one wall (1.5 x 2.4 high) will not be tiled, but there is also a half wall to be tiled of 1250 x 1200 high. I am wanting two niches, and also have a tiled bench/seat in shower. I want to tile to ceiling height which is 2400 I would like mitre edging for half wall, trim for niches and expoxy grout for the shower area

Waterproofing required as there is leak from the tiles

We supply all materials. Need labour only

Licensed Waterproofer And Tiler Remove all tiles and old membrane on shower base Engage with plumber ( already have ) to install new leak control flange and trap Reinstall new membrane and tiles to Australian standard Must provide certificate for works completed

My upstairs shower is leaking and needs to be rewaterproofed and retiled Water is dripping down the side of the trap

Shower type: Walk-in (no tray) Size: 1200mm (depth) × 1000mm (width) Drain: 900mm linear drain on back wall Drain body + puddle flange already installed Substrate: Concrete slab (already falling toward drain) Floor tiles: 600 × 600 Wall tiles: 600 × 300 Walls: Cement sheet Niche: Recessed niche already formed Site: Ready, clear access REQUIRED SCOPE OF WORK 1️⃣ Shower Base Screed (SHOWER AREA ONLY) Screed shower base only (not full bathroom floor) Single-plane fall only from entry → drain Fall rate: 1:60 (≈20mm over 1200mm) Screed must: Die cleanly into the existing puddle flange Be smooth, compacted, and ready for waterproofing ❌ No cross-fall ❌ No “fixing fall with tile glue later” 2️⃣ Waterproofing (SHOWER AREA ONLY) Waterproofing to be AS3740 compliant Areas to waterproof: Shower floor Shower walls Recessed niche Membrane must be dressed into the puddle flange All corners and penetrations reinforced Waterproofing warranty required Allow correct cure time before tiling 3️⃣ Tiling – Shower Floor & Walls Tile shower floor using supplied 600 × 600 tiles Tile shower walls wall-to-ceiling using 600 × 300 tiles Tile recessed niche Clean internal corners and neat window detailing Tiles cut accurately to linear drain opening Drain grill installed flush with tiles at final stage No lippage, no puddling WHAT IS NOT REQUIRED ❌ No full bathroom screed ❌ No bathroom floor tiling outside shower ❌ No plumbing or electrical ❌ No supply of tiles or fixtures

Two loose tiles in the middle of shower floor. Water visible underneath when pressed. Tiles need to be lifted and waterproofing checked. Looking for licensed plumber/tiler.

Shower leaking through glass gaps, need water sealant on floor reapplied and gaps in glass waterproofing

Shower Water Leak & Suspected Waterproofing – There is a water problem coming from the shower, with water seeping through the tiles. – Two tiles have recently been replaced, and during inspection a water puddle was observed forming around the replaced tiles, strongly suggesting a waterproofing failure beneath the tiled surface. – The shower does not appear to have any set-down or water barrier, increasing the likelihood that water is escaping into surrounding areas. Required Works: –Waterproofing specialist or shower repair expert to assess the shower base, membrane, and tile installation. – Rectification may include: – Epoxy sealing (Save ’n’ Seal) only if the membrane is intact, – OR full shower base rebuild and re-waterproofing if the membrane has failed.

Bathroom leaks. Need someone for waterproofing

2 showers are being retiled. I need old tiles removed and the walls prepared (waterproofed) for the tiler. Job must be done on 25th August. The tiler is booked for 27th August. The shower base will remain. Dimensions are: 850x850x1150x2000 is the first one 850x600x1150x2000 is the second one. Must take the building waste with you. Thank you.

I need to retile and waterproofing this shower including the shower base