Find a professional tiler in Waverley NSW

Remove wall tile and render smooth, ready for paint. There are 3 walls, each with two layers of existing wall tiles that need to be removed: 4.2m wide × 2.1m high 3.9m wide × 2.1m high 3.9m wide × 2.1m high Total area is approximately 25m². The walls are masonry in an older-style building. The scope is to remove the existing tiles, prepare the masonry substrate as required, then render the walls to a smooth, paint-ready finish.

If you are a stainless fabricator with suitable offcuts, this could be a good small job. Do you have any 304 brushed stainless offcuts large enough for three small benchtop sections and a splashback? I need supply, fabrication and installation I have a very small kitchen and would like to cover the existing benchtop with 304 stainless steel, plus cover the existing tiled splashback with matching stainless steel. This is a rental property, so I want something very hard-wearing, practical and easy to clean. Approximate benchtop sizes There are 3 separate sections: Note sink part has to have all sides covered . * Sink section: approx. 135 cm long * Cooktop/oven section: approx. 70 cm long * Back section with no cut-outs: approx. 142 cm long Depth is approximately 60 cm, but all measurements are rough. You will need to measure properly before fabrication. There is an existing sink and cooktop that need to be worked around. Splashback I want the existing tiled splashback completely covered with 304 stainless steel. I would prefer the stainless splashback to match the benchtop. It’s approx 60 cm high Not urgent happy to wait anytime you have a time

**Experienced Tiler Wanted – Small Finishing Job** We're looking for an experienced tiler to help us finish the final stage of our tiling project. The project is almost complete, with only **10 full tiles and 6 half tiles remaining**. The main challenge is fitting **4 tiles around a drainage outlet**, as we need precise cuts and a professional finish. We already have all tiles and materials. We just need someone with the right experience and tools to complete the final section properly. **Job details:** * Install remaining 10 full tiles and 6 half tiles * Make accurate cuts around the drainage area (4 tiles) * Must have tiling experience and own tools * Small finishing job for someone available soon Please send through your experience, availability, and quote. Located in Bondi Junction. Thank you!

I have the tiles x15 Small bullnose tiles on stairs You have to provide cement and grout I have tiles all i need is concrete grout and your skill

We have had repairs done to our pool and need an experienced pool tiler to repair and tile the mosaic tiles, and the tiles around the pool edge coping. I have all the tiles (the mosaics and the pool tiles) ready to go. I just need someone that can tile and KNOWS what they are doing. The pool has a window so the mosaic tiles have to fold over the edge and up to the window. The top of the pool will need a screed, a quick waterproof, and the tiles laid on top. The coping is 1200 x 300 and the tiles are 600x600 and they are 10mm ceramic tiles. The total area is 7mx2m (less the pool which is 6mx1.5 approx). We can start straight away and work during the week and the weekends as well. You need to supply the screed and glue, we have the tiles. We need to get this happening before Dec Please quote or I am happy to have you come past and inspect personally before you quote. But you MUST have experience in doing this type of work. thank you

I have tiles x15 Small bullnose tiles on stairs You have to provide cement and grout them .

I have tiles x15 Small bullnose tiles on stairs You have to provide cement and grout them . Maybe 30 min work

1 hour work I need a tiler to put 15 bullnose tiles to fix my stairs . I have tiles x 15 But you will need tools and great adhesive concrete . I have had this fixed 2 times now .... and rhey fall off within 3 months Probably 1 hour work if that

I need the tiles at the base of my shower re-grouted, with silicon applied around the edges that meet the wall. The shower base is 85cmx85cm. Must be a professional job. - Due date: Before Saturday, 15 April 2023

Hi. I would like to replace and re-tile this floor drain. (Square drain pics are a suggestion for replacement drain only) Also need some of the grouting Re-sealed plus, bottom edge of the shower silicone sealed. (A plumber has already cleaned out the drain properly) - Due date: Needs to be done on Friday, 23 September 2022