Find a professional sauna installation service in Sydney

I plan on installing a 4.5KW sauna on my upstairs balcony. The switchboard is downstairs, wondering if it’s possible to run power up to the balcony and if a new breaker is required or the sauna can be fed off the existing power up there? Sauna specs - Alpine Spas Lucca Heater: 4.5kW/ 20 Amps Lights: 25W/ 10 Amps

Structual engineer to certify that my balcony can support a small sauna weighing 300KG. Strata has advised this certification is required to be approved for install. Balcony is located top level of block on an area of around 15m2.

I need a safe, compliant hardwired connection run from the switchboard to the sauna heater location. The heater is 9kw 220v. The main breaker board is almost right on top of where the sauna will be located but on ground level. The sauna is in the basement below. There is electrical conduit running down the wall below the breaker and there is a power point down in the basement, also very close to where the sauna is.

I need an experienced person (or team) to carefully dismantle and reassemble a 3-person Found Space sauna and move it literally next door — about 20 steps away. The job needs to be done ASAP. Here’s what’s involved (essentially the reverse of this video: YouTube link): https://www.youtube.com/watch?v=jgsmWnB5Xfc Steps: • Remove the glass door first (must be done before anything else) • Disconnect all cables from the control box that run through wall cavities • Unscrew the roof • Unscrew and remove front heaters • Lift off the roof • Remove the glass panels • Disassemble the bench and under-bench heaters • Unscrew and separate the back panel You’ll then need to reassemble it in the adjacent room, ensuring it’s level, stable, and the electrical components are correctly reconnected. Requirements: • Must have experience assembling or moving infrared or similar saunas • Must have your own tools and basic electrical understanding • Ability to handle glass safely This is a quick but delicate job — ideal for someone who’s handy with furniture or appliance assembly and available immediately.

Put together a Serenity Full Sprectrum 2P sauna that came in a kit. Instructions on their website.

Need a custom built Sauna

I need TWO saunas to be de-crated from its wooden crate and then assembled and installed. It has 4 panels plus electricals that need to be installed. You need to have your own tools and be confident that you can put together and install a sauna.

Disassemble then reassemble a clear light sanctuary sauna (one person model)

Offer includes all materials and labour - View all the details of this offer: https://www.airtasker.com/offers/01K0QSJ3VZSQRXP0S0E4XZZKKG

I need you to assemble and install two infrared saunas. You must have experience. They come in seperate pieces and need to be put together. You need to have your own tools.

We need a skilled person with carpentry skills and experience to fix a fallen timber part inside a sauna in Surry Hills.

Wanting a colorbond roof over my new sauna. Approx 1.5m X 2m

We have installed 2 new saunas in a gym but the heaters are not working. In one sauna. the infrared heaters are working and the Stove heater turns on but is not getting hot. In the second sauna the infrared heaters were working but the stove heater wasn't turning on. Im not sure if teh origional electrician has wired them correctly so I want another electrician to check the wiring is correct .

I need 1 x sauna disassembled It will be reinstalled so I require someone with attention to detail and is competent Must have own tools Shouldn’t take more than 2 hours

Need an Electrician ASAP to replace a faulty control box for an infrared sauna. New electrical box available, just need to get someone to install it today! Location: Pitt Street Sydney 2000

See assembly video https://youtu.be/1HsdMb65_m4 Must have your own tool and no parking available

Looking to have a sauna installed. 10amp electrical

Hi guys, we have 2 large wellness companies and want to offer home delivery & install services on our cold plunges & saunas in Sydney Metro (Offical Sydney Post Codes only) It would need to be a 2 person job so please only reach out if you have someone you can work with. Details: Pick up - Our warehouse is in Eastern Creek Delivery - All Sydney Postcodes Plunge installs - takes 10mins approx (very simple- connect 2 hoses) Sauna installs - takes 45mins first time (30 mins after - they are all flat packed and simple like furniture). Ideally we would like to build a relationship with a pair of well mannered workers & keep using them for all installs. Please let me know a quote - ideally a flat rate for all offical Syd postcodes for simplicity. Thanks, James

The sauna has stopped working due to water damage. The control board got wet and shorted out. I replaced the fuse but it is still not working..

Wood panelling of my sauna has broken due to weather, need a fix - Due date: Before Thursday, 23 November 2023