Find an experienced handyman in The Gap

, I’m moving out of my rental in The Gap and need some tidy wall repairs done before final inspection. It’s nothing complex — just light patching, a few paint touch-ups, and removal of a wall-mounted boxing pad. Looking for someone reliable who knows how to do a clean, efficient job and can complete the work on Monday morning (15 July). --- What Needs Doing: Inside the House – Plasterboard Walls 1. Kitchen Wall There’s a small gouge (around 5–6cm long) in the plasterboard next to the fridge It needs to be lightly filled, sanded, and painted I have the correct paint here: Dulux Wash & Wear – Vivid White – Low Sheen 2. Office Walls (two walls, two screws each) There are two screws in each of two plasterboard walls (four total) from previous wall-mounted items I need the screws removed, the holes patched and sanded, and the walls painted using the paint I have You’ll need to bring filler, sanding tools, and a brush or roller. Paint is provided. --- Outside – Corrugated Metal Wall (Colorbond-style) 3. Remove Wall-Mounted Boxing Pad The pad is mounted to a white corrugated metal wall panel (similar to Colorbond) Once removed, patch the screw holes or replace them with similar white-painted roofing screws so the wall looks neat and consistent No need to replace the panel — just a clean, finished look is fine

Hi there, recently renovated house needing doors cut down due to newly installed carpet. 3 x doors require being cut down and 5 require new hardware being installed and replaced. Will provide new hardware. You will need the tools to complete this task. Looking for this to be done asap. Thank you!

Install 6 Kmart shelves using drill and anchor bits. Happy to pay for any anchor or screws you may need. Prefer someone who can get in and out quickly and do the job. You will need your own tools/drill/etc.

Professional cutting of low lying glass window for installation of pet door. Installation of pet door ideal.

Need to retrofit a kaboodle base end panel to the wall so that the new semi integrated dishwasher can be fit in . Cabinet door to the dishwasher also needs to be fit.

Need the following done: Install knobs in 7x doors. Old ones already removed. Replace 2x door locks (knob style). Replace 1x deadbolt. Install 17x cupboard handles. Replace small carport roof sheeting. It is screwed into the timber frame. Remove old in-ground clothesline. Install new clothesline on the wall. Install a small metal mesh into the wall cavity. Need to cut out for hot water pipe. Replace shower screen door. Replace bathroom mirror. Replace letterbox. Install barn door. Full kit provided. Pressure wash side access, carport and under deck area.

Swap two existing doors between two frames Shave another door which has expanded with all the recent rain

Get rid of the glass on the right hand side and install a new bigger door. The Gap

I need this fireplace to be bricked-in. The top course will probably need to come off - as is it sagging and needs to be flat for a mantel. I do not have spare bricks so some similar ones will need to be sourced. Would like this to be completed within the next 4 weeks. Thanks!

I’m needing a plasterer to install approximately 8Lm of 55mm cornice (5 pieces) and have it ready for painting. I have enough cornice here to finish it so it won’t require you to pick up any materials. I also have a little bit of pre mixed cornice cement; although you probably want to mix your own.. FYI- If it’s like the rest of the house.. It’s not going to be perfectly level/square.

Install a shower screen with sliding door (already purchased, instructions pdf available on the web page): https://www.elegantshowers.com.au/products/new-shower-screen-enclosure-wall-to-wall-framed-sliding-door-rail-adjustable?variant=42483756361 Shower: https://ibb.co/6J19j8Py You'll need a diamond drill bit appropriate for glazed porcelain wall tiles (something like https://www.bunnings.com.au/sutton-tools-6mm-diamond-core-dry-wet-cut-bit_p0356651). You'll also need to trim 33 to 40mm off the aluminium top and bottom rails in order to fit the wall to wall length. I can provide angle grinder with appropriate disc). I can also help where a second pair of hands is required. The sliding door is to be installed on left hand side.

We would like two sets of sliding doors and one sliding window frame painted or spray painted please. They are the old style mission brown aluminium window frames. We will supply paint.

Hey Been putting this off until the dryer winter months, but we have an old retaining wall behind our house, which has no drainage, meaning it becomes water logged and causes downstairs to become damp and the garage to flood. Anyways looking for someone to dig and install a French/agi drain behind the retaining wall to hopefully stop this happening. Access is tight but doable. It's about 1.2m at the side gate pictured, which comes off completely, after that it's pretty open. Will also move the water tank before work starts. Let me know if you have any questions. Thanks

Small crack in the ceiling (about the size of A4 paper) to be fixed. Just plaster.

Current awning has blown off so need a new mesh replaced

Seeking a handyman to install a milkcan clothesline. What I imagine is involved: - taking out a section of bricks - pouring a small amount of concrete - coming back to bolt in and install the clothesline Handyman needing to have all tools and concrete. The clothesline we are installing is: https://www.milkcan.com.au/product/13-line-above-ground-mount-med-large-family/. Installation instructions are found at that link. Space we are installing it in is pictured below (note that the vertical garden has been removed. Can complete the gig over the next week or two DM with a price if interested.

I need someone to paint the ceilings and cornices in three rooms. Some cornices have flakey paint, but the main focus is on getting the job done cleanly and neatly—no mess left behind. You’ll need to provide your own tools and drop sheets to protect the space. Paint can be supplied, or you can include it in your quote. Please share your experience and availability. Looking forward to your offers!

2 ceiling fans to be installed

Seeking a handyman to install a milkcan clothesline. What I imagine is involved: - taking out a section of bricks - pouring a small amount of concrete - coming back to bolt in and install the clothesline Handyman needing to have all tools and concrete. The clothesline we are installing is: https://www.milkcan.com.au/product/13-line-above-ground-mount-med-large-family/. Installation instructions are found at that link. Space we are installing it in is pictured below (note that the vertical garden has been removed. Can complete the gig over the next week or two DM with a price if interested.

We’ve removed oils and cleaned the shed.. it now needs to be painted. We’ve done one coat on the outside but the inside hasn’t been done. The task is to do two coats of paint (ultra deck stain) on the inside walls and two coats of paint on the particleboard floor (deck paint). Stain/Paint will be provided.