Find an experienced handyman in Glenhaven

I need a renderer to re-render the exposed front edge of a first-floor balcony slab. The job: - One continuous band along the slab edge, approx 15 lineal metres × 200 mm high — roughly 3 m². - The run wraps around the side return, so there are external corners to bead. - Tiles are already off. The face is mixed concrete slab edge and brickwork, with broken-out pockets to patch and build out before the finish coat. No reinforcement exposed. - Surrounding walls are bagged and painted brick, so this need not be dead flat — a brushed, bagged or sponge-float finish to blend with the existing bagwork. - Cut in neatly around the balustrade posts passing through the slab edge. Critical — the membrane and where the render finishes The floor is waterproofed and screeded the week before you start, and the membrane turns down over the top of the slab edge you are rendering. - Carry the render UP over that membrane turn-down so it is fully covered. Do not stop short and leave membrane exposed. - Finish on the chalk line I will mark, approx 20 mm above the screed — that is finished floor tile level. - Do not carry render across the top of the slab onto the deck. Tiles are not laid yet, so you have a clear edge. They go in after you, butting under the render with a sealant joint. Materials Either way suits me — just say which your price covers: - Bring your own and quote supply and install, or - Tell me the render, bonding agent, mesh, beads and patching mortar you want, and I will have it on site. Scaffold is erected and in place. You bring your own tools, mixer, buckets, drop sheets and PPE. Access First-floor, off scaffold, above a covered patio with roof and two retractable awnings — everything below must be drop-sheeted. Timing From Wed 30 September 2026. Waterproofing and screed complete the week prior. Please tell me in your quote 1. Your price, and how long you expect it to take. 2. What render system you want to use. Questions welcome.

I have two grab rails which must be installed by authorised installer They were installed previously by another person but the job is not completed properly. I need drill holes on plaster to be filled where grab rails were incorrectly installed and 2 x rails which I have available correctly installed.

Assemble Commercial Gym Power Rack / Rig Looking for someone experienced with gym equipment assembly / installation to put together a large commercial-style power rack/strength training rig. The rig has already been dismantled and all components are on site. It includes heavy steel uprights, crossmembers, pull-up bars, J-hooks/safety supports, weight storage pegs and various bolts and brackets. Job includes: * Assemble the complete rig correctly based on the supplied photos * Identify and position the different uprights, crossmembers and attachments * Bolt and tighten the entire structure * Install pull-up bars, weight pegs and other attachments * Square and level the frame * Ensure everything is secure, stable and safe for use Photos of the rig fully assembled will be provided as a reference. This is heavy commercial gym equipment, so ideally looking for someone with experience assembling power racks, gym rigs, commercial fitness equipment or similar steel structures. Please bring your own tools, including suitable sockets/spanners and impact driver/wrench if required. There are a number of large and heavy components, so the job may require two people for parts of the assembly. Please quote for complete assembly of the rig, not an hourly rate if possible. When responding, please mention any previous gym equipment or similar assembly experience.

Assemble a compact EasyShed bike shed. Dimensions: 2.25m x 0.78m

I tried to assemble the ones bedside tables but now the drawers won’t go in I have all the tools just need help fixing it

Install Door Handles & Cabinet Handles – New Build/Recent Renovation Looking for an experienced handyman/carpenter to install approximately 10–15 door and cabinet handles throughout our home. The house has recently been painted and carpeted, so care and attention to detail are extremely important. We need someone who works cleanly and professionally, takes pride in their workmanship, and leaves the site tidy upon completion. Scope of works: * Install approximately 10–15 door and cabinet handles * Ensure all handles are aligned, level and operate correctly * Remove any packaging, shavings and waste materials * Protect finished surfaces, paintwork and new carpet while working Requirements: * Previous experience installing door and cabinet hardware * Own tools and equipment * Excellent attention to detail * Clean and tidy workmanship * Able to work carefully around freshly painted surfaces and new carpet The job must be completed to a high standard and left ready for any final touch-up painting if required. Please provide details of your experience and any photos of similar work completed.

I need someone to perform approx 1/2 hour of gyprock sanding on minor patch jobs then vacuum all mess and put some minor rubbish in a trailer parked in driveway. Approx 1 hour work

I need someone to assemble a shed for me. Assembled around 150 length by 80 width and around 200 high. I have the shed in a flat pack.

I have an outdoor clothes line and I need all the hex screws removed. There is 4 in total and I’ve been able to remove 3 of them, however the last one has lost its thread a bit (previous owner) install and I’m unable to remove. Need Tasker with experience in removing this final hex screw. Job is considered completed once the frame is off wall.

Change rollers and refit shower sliding dooor

10 x Sheer Roman Blind 6 x Blockout roller blind 10x S fold curtain Needs installation service

Edit 23/12 10pm I also need the flue enclosure built - sometimes called a chimney breast or bulkhead - including carpentry, wall sheeting, insulation, cornice work and painting. As per the photo - the white painted enclosure. I need a slow combustion fireplace and flue installed in an existing house. I will supply the fireplace. Flue needs to go through a brick veneer wall and up the outside of the building. There is no fireplace in place currently. I can supply any other materials as specified by installer, or happy for installer to supply. Needs to be installed by end March 2026 latest. Seeking guidance on installation costs. Looking for quotes on labour only. Assistance with council application welcome but not mandatory. Thanks Tony

Need to patch with Gyprock small section and sand ready for paint

The sliding doors of a garden shed no longer slide properly. It appears that the hangers that hold the tops of the doors have broken

We need some one to dismantle gym set

- My two bathroom ceiling fans are making noise, they didn’t before. Come make them quiet again. - I also need my shower taps fixed, they’re stiff and hard to turn. - Remove water saver from my bath. I don’t have tools or a step ladder, so you will need to bring.

front fence columns is cracked . Looking for someone to inspect and provide a repair quote.

plumber needed to change kitchen sink tap. Refer to attached photos

Replace broken shower screen. Its is 2X1 m roughly. Frameless panel.

Our under mount kitchen sink has detached and needs resealing.