Find an experienced handyman in Byron Bay

i need 9mm villaboard cut to 100mm heights at various lengths 2off at 1600mm 1off at 2600mm (can be 2pcs to make 2600mm) 2 off at 500mm all must be 100mm high and 9mm thick villaboard. delivered to byron bay

We need assistance with the following tasks of our small house: 1. Install hook and eyes on doors x6 (we'll provide the hooks) - One side is fixed to the door, and the other is fixed to the external wall 2. Clean retractable awning - this will require a mould remover product and a low-pressure rinse 3. Light scrub & pressure wash timber decking and seating areas 4. Sand back and re-coat x6 exterior doors - exterior only, requires 2 coats, paint will be supplied 5. Lightly plane 2x wooden doors - they have swollen and are currently too tight to open/shut 6. 'Refresh' a wooden bench - sand and oil the wooden slat seat and wire brush the steel frame to remove flaking paint 7. Clean out all gutters

Need professional glaziers that are experienced in shower screen installation for 3 showers

1. Supply & install stainless steel cabin hooks to French doors x6 2. Clean mould from yellow retractable awning (mould remover + low pressure rinse) 3. Light scrub & pressure wash timber decking and seating areas 4. Sand back and re-coat 6 exterior doors (2 coats, exterior only — paint supplied) 5. Check and lightly plane large wooden doors — currently too tight to open/shut 6. Sand Eames wooden bench on back deck, light timber treatment, wire brush steel frame to remove old paint 7. Clean out all gutters​​​​​​​​​​​​​​​​

I need someone to install an awning and also assemble a sofa bed. If you can only do one or the other that’s fine. Just let me know.

Ice-cream machine clean and maintenance program Empty mix, disassemble machine, sanitise Reassemble, place pump back together Lube all o-rings and beater seal Test with water no leaks Add mix Run to production - test ice-cream product Track on I-phone before/after pics Suitable for handyman who is mechanical hands on ability Prorated $50 per hour. Single 1.25 mins = $70.00 Recurring each 2 weeks Thanks so much

Please assist with rewiring a chandelier for an event, need electrician. 3 small 3kg chandeliers, need to rewire it to flex and plug ends for an event. Thank you.

Hi there I'm looking for a sparky to supply and fit new lights/fan to be fitted to a unit in Byron Bay, this is what needs done - 2 x LED down lights in bathroom 1 x Light and ceiling fan combo 1 x ceiling fan 4 x small oyster LED lights 5 x large oyster LED lights 1 x exhaust fan This includes new switches and dimmers as well. Love a quote please.

1. Remove old numbers and street sign 2. Drill into brick new numbers and street sign (both already purchased ready to go)

Looking for someone who can lay a 6m2 concrete slab in our yard for a garden shed to go on. We will provide all materials and hire a concrete mixer to use. Ground is very flat but needs to be dug out a few inches down, levelled and poured.

Require someone technically minded to assemble a Hammer Strength Leg Press onsite at a customer premise. Will provide exploded diagram. Approx 2-3 hours work in Byron Bay this afternoon/evening starting 5pm Suited to a builder or handyman or flat pack installer.

Install door hardware and audit - re-hang doors - Hang 50inch TV - install bunk bed

One of the wires attached to a table lamp has broken

I need a ceiling fan removed and the hole filled or replaced with a downlight

Replacement if aluminum flyscreen mesh of a door 2.3x1.3 m

Looking for someone to remove 5 panels of cement sheeting and an about 5 panels of asbestos sheeting.

Recliner needs to be moved to front of house. Part of Front Porch Railing needs to be painted. Mail box need to be removed and repositioned on side of house. Have paint for railing Have cement for mail box repositioning

I have a flat pack kitchen (not a full kitchen- see photo) set from Bunnings (only a sink needs to be cut out in the laminate bench) that needs to be put together.

Site visit for blinds project and further installation when ready, experience with installing blinds would be ideal

In need for a Gyprocker for 1-2 days work. Only patch work. Material will be supplied