Find experienced local carpenters in Byron Bay

Looking for someone to build a custom timber cash register platform for a shop counter. I've attached a drawing that I created with ChatGPT. I had to make some slight adjustments for it to be correct. Overall dimensions: • 690mm long • 450mm wide The cash register footprint is: • 415mm x 415mm Requirements: • The cash register needs to sit 75mm above the counter surface. • A 20mm retaining lip is required around the cash register footprint only (front, left side, right side, and rear of the cash register footprint). • The retaining lip is there to stop the register sliding forwards, sideways, or backwards. To save material and cost, the platform does not need to be 75mm thick for the full 690mm length. Hence why I dropped it down to just 20mm at the back. It needs to be 690mm long because the back of it will sit against the back of the point of sale shelving, which will hold the unit in position. I've attached a photo of our current temporary setup, where we have some timber shelving underneath the cash register to give it the height. Behind the cash register is a block of wood which is stopping the cash register from sliding too far back. This is the setup I'm looking to replace. I am happy for the successful tasker to suggest the simplest and most cost effective way to build it. The side view in thee chatgpt drawing is incorrect because it does not show the retaining lip continuing around both sides of the cash register footprint. Please provide: • Price • Material you would use • Estimated completion time

I need someone with carpentry skills (at least 2 years) to assist with carpenter-related tasks, including the installation of a straightforward flat-pack kitchen. Preferably a handyman/maintenance person, as there are other miscellaneous tasks, such as drains. $40 per hour.

🔨 Qualified Carpenter Needed – Tiny House Build (Byron Area) Hi there, I’m building a tiny house on a trailer near Byron Bay and looking for a qualified carpenter to help me get it to lock-up stage. This is not a full builder contract — I will be working alongside you as labour, so this is more of a lead carpenter role.

Apply 3 sets of stainless steel wiring on a pine fence to replicate my other ones

Sand floors and stain dark colour 140 sqm

I’m looking for an experienced handyman / furniture restoration person to sand back and re-stain a 5-piece outdoor timber furniture set to restore it as close as possible to its original colour. Furniture includes: • 1 x outdoor corner bench • 1 x outdoor bench • 1 x single chair • 1 x coffee table • 1 x side table What’s required • Full sanding back of all pieces • Re-stain to match original colour as closely as possible • Finish suitable for outdoor use (oil or stain, not paint) • Clean, even finish (no patchiness or drips) Important notes • Tasker must supply ALL tools and equipment (sanders, sandpaper, drop sheets, brushes, etc.) • Tasker to help select the correct stain colour – ideally by matching to the original colour or referencing the table leg (see photos) • Must be experienced with outdoor timber furniture • Job must be completed this week Happy for this job to be completed over a couple of days for drying purposes.

We have a large timber deck to wash and stain. We will provide the pressure cleaner and all the staining materials to do the job, located centrally in Byron Bay , there is about 120sqm approx

please assist in drawing joinery design details for our kitchen bench and tv cabinet and possibly some stone cut measurements too.

I need a carpenter to finish off my deck and cladding screen in Byron bay. Can pay on a daily rate. You need to have tools

I have an island kickboards and a cabinet that needs to be installed.

Outdoor table is rotting. Would kike to removed please. Base appears to be concreted in so I think it would need to be sawn off at the base.

Looking for a Joiner to make small counter top and Shelving for a small shop The counter is just 1.5m in length x 90cm (but flexible with design) The photos is what was in the shop previously.

Need a person with some carpentry and laboring experience to restore a deck and other carpentry work at our property . There's a week of work there and it may be extended . You will be managed by our project manager Damien .

I am looking for an experienced carpet cleaner who knows how to get 2 x stains out of my carpet (I am moving out of this house). The blue and white stain is from a candle. The other stain is dirt. Images attached.

I need someone who can build a wood structure for my VW transporter. The price Im putting is per hour

Open to ideas of how to do - strip back, paint/resurface or laminate old cabinet ( 4 doors + top bench). External only. If need to see in person to quote, happy to show tomorrow onsite in Byron Bay. Further joinery + carpenter work available if completed well. - Due date: Flexible

We have a workshop, central Byron Bay, and I are looking for experience craftsman to join our team to field camper vans, six months minimum - Due date: Flexible

Damaged lacquer to chest of drawers top. We are after a repair - Due date: Flexible

I need someone to help sand, varnish cabinet doors and shelves, fill nail holes, apply no gap, and touch up painting. We are running out of time finishing a project so would love a second pair of hands. We do require you have experience with this type of thing as we would not have to time redo if things are messy. - Due date: Before Monday, 2 October 2023

Wooden panels next to dishwasher need replacing :) open to quotes! - Due date: Flexible