Find an experienced gas fitter in Sydney Eastern Suburbs

Remove the gas meter from the front fance and put it on the different wall

My gas cooktop igniter keeps clicking and I need to turn it off. I have turned the power off at the switchboard a number of times but this has not fixed it.

Gas heater closing off after 15 mins Gas oven not staying ignited when gas button is released Gas stove working

To replace a Westinghouse cooktop of natural gas with a new one

I need a licenced plumber to disconnect the gas cooktop and over.

I need a licensed gas fitter to run copper pipe to new gas pool heater. There is an existing line that connects to the house that I think you can run a junction off to the pool. It will require approximately 10-12m of copper. Also will most likely require some penetrations to be drilled and clips installed.

Looking for a licensed gas fitter that can connect my BBQ to the natural gas bayonet, with a stainless steel hose (provided). The hose is 3 meters long, which is longer than the original one that came with the BBQ, therefore, you will need to adjust the gas pressure for it to work properly.

My dog chewed through my BBQ hose. It’s only the bottle section of the hose that’s damaged (the section at goes into the natural gas outlet). See photos. BBQ is an Everdure. Can come anytime to do even if I’m not here. Thanks, Ryan

Unplug Freestanding Gas Oven and Cap the End.

Need to fit pipe work for LPG gas piping to connect a new cooker and oven with portable LPG gas bottle. The distance from the cooker to the bottle is only about 1 .5 m but the pipe will have to travel horizontally then upwards. This is on my boat- easy access from Rose Bay wharf out to my boat which I can arrange at any time to suit you. There’s 12 hour parking nearby in the car park for your van or truck. I will drill all holes and make pipe access easy. You need to: supply parts and labour; - bend and fit the pipe and secure it. About 3 meters of total run. 5-6 bends. - supply and fit a stop valve each end. - inside end; add a t joint and end fittings for 2 flex hose fittings suitable for standard domestic gas cooker and oven - outside end; fit regulator for LPG gas bottle - need license and will need confirmation n completion that it is fitted to standards in Australia.

I want to disconnect my oven from the gas line and cap it off. And disconnect my unit from the gas meter. Should be pretty straight forward and easy to access on my floor

Cap off water and gas pipe

Repair pipelines as per this image.

Task: Gas cooktop igniter repair – licensed gas technician required Description: Electrolux gas cooktop (approx. 15 years old) with igniter constantly clicking. Looking for a licensed gas technician to diagnose and repair. Requirements: • NSW gas licence required (must be stated in offer) • Experience with gas cooktop ignition systems Scope: • Diagnosis • Repair/replacement of igniter or spark module • Testing of all burners and safety check Budget: • $300 max (includes labour + standard parts) • If additional parts are required, quote must be provided and approved before proceeding

Have a new CrossRay infrared BBQ. Have a conversion kit and have already changed the jets and backing plate for the knob. Just need someone who can connect to the natural gas outlet and issue a compliance certificate. Will pay cash.

Qualified plumber to connect gas to new built in bbq.

Got an issue with my BBQ. Not used a lot, moved it and I think Ive damaged or made one of the gas pipes loose. Tried reseting the safety, tried different gas canisters and cant see the problem, but can hear gas coming out and can smell it. Its a Masport BBQ.. need someone experienced to test the pipes and replace / fix what needs sorting.

++ only licensed plumbers please - gas connection ++ We have a permanently installed gas heater that we want to remove. The unit is mounted against the outside wall and has a gas connection and an exhaust connection through the wall into the side passage. The feed line for the gas runs through the side passage and is accessible. We want this unit to be disconnected only, and the existing gas connection to be replaced with a bayonet connector (if the location is ok by Australian guidelines). We are happy to keep the disconnected unit if discarding of it is more expensive. All works are on the ground level in owner-occupied house.

My gas cooktop no longer ignites spark and as a result the gas does not lit. I am currently using external lighter but I want to fix the gas igniter for my gas cooktops.

There is an issue with the gas connection to my Weber Spirit. Gas cylinder is full but not reaching the burners