Find experienced local fencing contractors in The Gap

Need some areas rural fenced to create some paddocks. (Star pickets to be 3m apart and five wire. potentially mesh installed). We would also like a rough price on boundary fencing. Rough markup of paddock fencing attached. Gates also required and marked.

My husband is unwell and can’t complete our fence. The posts need to be trimmed.

As per images the gate at the side of the house won’t close properly. Something must have moved / expanded as it’s very off.

Experienced Fencer Required – The Gap – Complete by 12 September Looking for an experienced fencer to supply/install and complete fencing at our new-build property in The Gap, Brisbane. Landscaping and preparation for new turf are currently underway, so I am looking to have the fencing completed as soon as possible and no later than 12 September. Quote required but indicative budget $8k Scope: There are 3 sides requiring fencing: * 2 sides are along existing retaining walls and the fence will be installed using the existing shark-fin fence brackets/posts – no ground posts required along these sections. * 1 side requires posts to be installed into the ground. This side also provides access to the backyard, so I would like this section prioritised before final turf preparation and installation. * Installation and completion of fencing across all three sides. * Removal of post-hole spoil and construction debris on completion. * Site left clean and ready for final landscaping/turf. The yard is currently unturfed, which provides a good opportunity to complete the fencing without needing to protect an established lawn. Timing is important: the entire landscaping/fencing project needs to be completed by 12 September, so preference will be given to someone who can inspect and commence promptly. Please include in your response: * Relevant fencing experience * Earliest availability * Confirmation you can complete by 12 September * Whether you can supply materials or prefer materials supplied * Examples/photos of previous work * Whether you are insured * Indicative price or whether you would like to inspect before quoting Photos of the property and current retaining walls/shark fins are available. Location: The Gap, Brisbane

We have an existing glass pool fence that requires repair. The stainless steel spigots are in good condition, however the anchor fixings have rusted and need to be replaced. Note that each glass panel will need to be removed to access the bracket fixing points (2 person lift that I can assist with).

We have a Tennis court at our business that needs the back fence replaced. It is only one section. It is 6 metres high and approximately 17 metres wide. We will provide the fencing and wire.

We have an existing gate and fencing panel that need to be completely replaced due to wear and tear. We are looking for like for like replacement in same setting and would like this to be lockable from the inside. There is a tree currently in the corner that is pushing some of the panels out of place so need some advice around location of fence line with that there. We have a dog so needs to be down to ground level as per existing. Not concerned about repainting in the blue as outdated, but timber will need to be treated please in clear finish. Access is good up side of house you can park on driveway and is about 15 metres up side of house. Dimensions are approx 2.1m width by 1.6m height. Price in removal of old timber after job complete.

Looking for fencing quotes for installation. Also need to take down the current fence. One section pool fencing and other is timber. I will handle the disposal of the old fencing. One side is approx 20 metres with one gate, the other side is just one straight section of approx 18.5m. We may need the two sections quoted in two parts so that we can try and afford it. I am more than happy to order the fencing panels and supply what is needed. I need someone who can install it as I am unable to do the job. We run a rescue charity to we would like to have the blue colorbond 6 ft full privacy fence to accomodate all of the different dogs we take in.

We’re looking to get a gate added to the rear fence of our property, to access the adjacent park. The fence is older vertical timber slats. We’re interested in whether it would be feasaible to install a gate to the rear of the property using materials from the existing fence? Or if not, just install a new prefabricated gate. We're keen to have the gate fitter with a particular Lockwood 530 Digital DX Entrance Set numerical lock. Happy to answer any further questions, and we're flexible with our availalbility. Open to reccomendations around the scope of the job e.g frame material, posts etc. Cheers, Jonathan

Standard fencing quote needed for 16m and 1.8 m high timber or colourbond

Attach approx 5 m of wire trellis to back fence. The trellis will require drilling and brackets to attach to fence.

I have a large roll of 1200mm high steel mesh to be well secured to approx 14 metres of existing timber fence frame. Top and bottom horizontal battens will also need to be attached. The battens are painted and ready to go but may need to be cut in places. Ignore the temporary pool fencing

I need a 15 metre long wire fence to keep a dog out of one part of the yard. I’ve already bought the star pickets and chicken wire.

we have a shared wooden fence that has pailings that have come away, I would liked them nail gunned back on to the frame. Also we have a wonky latch that needs to be fixed. picture four is the preferred nails I would like used

Remove old fence & vegetation. Install new hardwood posts with chain mesh. Approx 70m length of new fence required.

Look for our boundary fence to be replaced. Unsure what this will cost us. Approx 50m long. Photo attached for style of fencing required

Fence required to be repaired : 1) fence is leaning over to requires digging into the ground to restabilse 2) reattaching the fence to support posts 3) attaching the slates back to the support

Re install framed glass pool fence, 3m section, includes gate.

Erecting a 900mm x900mm palings (as the red panel indicates) on top of the existing fence, add wedges as required to prevent stepping points

Part of the fence needs new post(or two) and reinforcement. Need to get it fixed ASAP before it becomes a hazard. The fence is about 2.5m high from the ground on our side. May need two people to safely dismantle a section before being put together again. Happy to get it done on the weekend.