Find experienced local fencing contractors in Buderim

Install 10 fence panels, all material is ready, just need your skill and your tools for the job

Fence post needs replacing. Rotten at base where it’s set in concrete. Post 173 cm to base

Replace single fence paling attached by galvanised nails to a metal gate frame and re-attach latch for gate locking mechanism. Paling is 173cm high. Cut paling to match top and bottom line of fence and handle circle. Check gate locking mechanism working after replacement.

Move temporary fencing so that it’s to boundary (20 panels) Carry 4 panels around into garden Friday or Saturday Make an offer

Require supply and installation of a side timber fence with a gate. Fence would be approximately 2.3m long and will need to extend to the property boundary fence (through garden bed) Needs to be installed any day from 2 - 4 September

14 meters of wooden fence installation on a slope on the sides of the property 17 meters of 1.8*1.8 aluminum panels installation on a relatively flat surface No old fence in place. We will he supplying the wooden and aluminum panels only.

As previous, replace 190m of 6 foot treated pine paling fence, 30% of posts likely need replacing.

We have a fence in the back yard that the previous owner installed, however the base of one of the wooden posts is now rotting since we don’t need the fence and we would it removed. We also had a roof seal leak and the water caused a small section of the roof eave lining below to fall away. The leak has been repaired but we would like the remaining damage repaired.

59m side and back fence stepped down within boundary (i.e. not on boundary) as highlighted in attached survey. Plinfs with no gaps. Required asap for sale of house. Monument panels to match other side, pretty sure its lyasight saw tooth. 2m high preferred for north boundary. Ok to reduce height in rear boundary if cheaper, as long as it covers neighbours fence.

Small section of boundary fence repairs (around 1-2m) required to meet pool compliance. Some palings require replacing and a post requires replacement. The picture is the section where the post is not stable. There are a few palings along the res of it that are not pictured that may also need replacing. Air tasked will need to supply all tools and materials

Hi, I’m just after a quick quote please. I live down a battle-axe block and I’m looking to build a solid boundary wall between neighbours, approximately 30m long and 1.8–2.0m high. I’m after the most cost-effective option, so please let me know the cheapest suitable way to do it. Thanks

Post for Craig to discuss install of a fence in Buderim

Take down an old 25m fence, cutting back greenery. Stacking fence tidily in a single area and clearing the garden waste so that it looks clean and tidy. Put temp fencing up during works (standard moveable panes) Looking for a total price. Council laneway behind It’s 20m long

Install pool fencing, we have existing steel fencing, but would like quotes on installing that and also looking at installing some glass panels with the existing steel fencing.

We are needing an area in the backyard fenced for our chickens. We have the wire and star pickets

Complete installation of electric gate to property as well as personnel gate. All powder coated aluminum. All materials on site ready to go

We need a skilled tradie to build a fence near the edge of our retaining wall. Around 1m height fence. Pool pump screens around our pool pump.

I’m looking for someone to make a fenced area in my backyard as a secure dog run. I’m thinking simple metal fencing held up with metal stakes, designed so our dog can come in/out of the garage into this secured space as the property fencing isn’t secure. See photos for an example and then my backyard space.

fix or rebuild a timber fence

Front yard only, boundary on both sides. 6.4m one side, 3.5 the other side. 1.8m high, potentially on sleepers as the yard is sloping. Starting at 2m or 2.1m (on a 200 or 300mm sleeper) from the existing side fences, with a 300 or 200mm drop on the last panel coming closer to the street. Not to be ragged. One side (6.4m) is definitely a Colourbond the other side could be same or if you can do with decorative rusted panels attached to 3 concreted steel or timber posts (100mm x 100mm). Also fix one sunk panel (pushed by a tree), dug under, clean and straighten it. Potentially help me with installing privacy Colourbond lattices to existing back fences (if I struggle doing it myself). I like paying per hour, but you can quote me for the whole job. I want quality and I roughly know how much something should cost me. Suits someone needing a job, isn't in a rush and can provide quality to meet customer expectations.