Find a fence installation professional in WA

Remove the gates from the front ( left and right) and replace it into colour bond fence with both the sides ( one side with lock). Pictures will be sent later.

Hi I have around 30 panels of asbestos want to remove and install colabond fence instead I’m located in Balajura

Supply and install colorbond gate between laundry and backyard. Dimensions: 820 x 1770 Colour: Monument

I have a galvanised steel-framed gate (~1600 x ~1600mm) that needs new hinges installed. The bottom hinge is completely seized, and the top hinge is missing its plate + pin, so the existing hinges will need to be cut off and replaced with new weld-on hinges. The gate has already been removed and is accessible. The gate will be mounted on an existing timber post via the screw-on plate. I believe the current hinges are Goliath G4 weld-on ball-bearing hinges (~85 x 45mm), but I’m happy for these to be replaced with any compatible, good-quality alternative. Looking for: - Supply + weld-on installation of new hinges - Hinges to be aligned during welding so the gate is compatible with the existing sliding bolt latch receiver (I’m happy to hang the gate myself) I'll handle painting/finishing after installation.

Boundary fence height increase

Fencing upto 80m as per photos

Drilling small posts into colorbond fence and then the oscillot rollers. 4 x 2m lengths.

I am looking for a handyman or tradesperson to install a self-closing spring or hinges and a latch on a garden side gate. Job details: • Install a spring for self-closing function on garden side door • Install/adjust hinges as required • Ensure the gate closes properly and aligns correctly prefer someone with Own tools and equipment.

Install a colour bond gate at my property

Install PA gate with side panel - colorbond 1.8 high 1.7 width PA gate - approx 1m width Side panel- approx .7m width Belmont area

removal of 1 x pillar and wall section and replaced with colour bond fencing to match the existing colour bond on the neighbouring property. Skip bin and fencing requirements supplied by client.

the fence is rusted out at the bottam needs replacing

I have some old besko glass pool hinges on our pool fence that need to be replaced. I have bought replacement Polaris 130 hinges and I just need them installed.

Build 9m of colourbond fence. All consumables supplied and ready, 2bags of concrete per hole. All colourbond fencing on site ready to be installed. All 4 holes dug already to around 400-500mm might need abit more depends on height alignment of rear fence. Just have ran outta time and need it done to mark my boundary.

Fence extensions installed to existing fence and gate - materials supplied by us. We do not have the tools to DIY e.g drill and would like it done by someone who knows what they are doing. The purpose of the extensions is so that dogs are unable to jump the existing fence/gate as it is currently too low. Yellow markings in photos show where we would like the extensions placed. Photo of the actual extension upon a colour bond fence is an example only. Thank you 😊

One of the wooden gate posts has termites ( now treated) and needs replacing with another wooden post.

Hello, I am looking for a tradie to install a pool fence (see pictures below) in my house outdoor area. The pool fence should be installed between the garage and the grass play area to prevent my kids going into the garage. It's 2 pieces of fence with a gate. The gate will be fixed in between the two pieces of fence and the two pieces of fence will be fixed to the wall. Measurement is 5.4m. I have already bought all the materials needed. Now I just need a tradie to install it for me. I don't know the prices so I've just put $10. So you're free to give me your offer, thank you

3 metres width Colourbond gate needs to be replaced with something less expensive. The gates are damaged. This area is prone to high wind.

Going to need a 3 meter long piece of colorbond fence panel removed, and then a week later I’ll need the piece of fence put back into place

Looking for a quote for supply and install of aluminium slat gate as per drawing attached.