Find a fence installation professional in St Ives NSW

Fence Installation Labour Needed. Looking for someone to install a picket fence. Approx 20 metres in length with 1 gate. What you need to do: • Dig post holes, measure, level and install posts- spans across concrete so will need you to set and provide concrete. • Attach fence panels • Install gate with hardware What I'll provide: • All materials (RapidFence panels, posts, gate from Bunnings) minus concrete • Panel width: 2.2m each • Gate width: 0.9m • Remaining for panels: 20m - 0.9m = 19.1m • Panels needed: 19.1 ÷ 2.2 = ~9 panels • 12 post holes @ ~150-200mm diameter x 600-900mm deep • Quick-set post mix: ~1 x 20kg bag per hole • Total: ~12 x 20kg bags Photos of fence style and front yard attached.

Sections of backyard fence to be repaired/replaced fence rotting. Probably replacing. Happy to receive quotes. Length of fence is looking to be approx 10meters long. Some sections have been replaced or attempted to repair by previous owners.

Removal of old gate/fencing and install new aluminium gate and partition. Gate and fencing materials supplied (as pictured). May need additional hardware (bolts/screws) for securing to ground/wall.

Rebuild a shared fence for around 23m. I would like to have quotes for both rebuilding and repair. Open to quote for rebuild. Thanks!

I need a quote for two small fence jobs for next week/weekend. The place needs to be secured for a dog. And there is two openings i would like to install a door or gate in. You can see from the attached pictures.

Item 1. Need to remove and install 30 metres of fence along the back - 1.8m high top and bottom rail. Preferably green. First 3 photos Item 2. Install 800 high fence along the side in front of existing which is pretty poor shape. Happy to leave as trees and shrubs cover most of it. Last three photos Need this done so dogs stop escaping into the bush and neighbours Open to suggestions on a more cost effective solution

Need to install 2 x pool fence by connecting them over the 3.8m timber fence. (Fence from Bunnings, as shown in the photo) and post on top of the timber fence. Aluminium fence is 2400x900mm each.

We are looking for a single gate lockable and 1m high chain long fence along the back of our yard The current one is dilapidated so it needs to be removed and disposed of. It’s a chain link fence Approx 50LM to be installed galvanised

Pool fence required to comply with nsw pool requirements circa 20-30 metres of fencing at 1.8 m height Fence must meet compliance requirements

We are looking for quote for some to purchase and install a fence at our new rental. There are 3 seperate sections that need fencing, approximate measurements; 1 m 3m (this could be a gate, whatever is easiest/cheaper) 6m boundary fence. The fence will need to be 6ft as we have dogs that jump. Prefer Colourbond or timber happy to go with whichever is cheaper.

1. Replace hinge and attach gate to fence. May need replacement panel. 2. Replace pool latch for another gate. Pictures attached.

Drill into Metal pool fence to install perspex as to meet with pool compliance. Must bring own tools & screws please. I have the sheet of Perspex.

Replace exisitng aluminium pool fencing approximately 5.7 metres in length plus pool gate (approx 1 metre) including self closing hinges and magna latch etc (must be pool compliant).

Driveway to be relaid, levelled, new gate to be installed.

36 mt lenght 13 mt is 1.8 mt high 7 mt is 1.6 mt high 13 mt is 1.2 mt high - Due date: Flexible

1 day two men (full day) to install swimming pool fence (half metal fence and half glass fence) - fence material and screws are ready but you need to have cutting metal equipment and drilling hole equipment (10mm dia holes) 1. Cut 7 old existing metal pool posts (50mm*50mm)prior to new installations- see photos - cutting equipment by you 2. for metal parts of the fence install 7 screw posts on pavement and install metal fence 3. for glass part Install 30 spigots - each has 4 screws of 10mm dia and 75mm length ( = 30*4=120 holes) - holes to be drilled on sandstone pavement - you to provide drilling equipments (I have spigot and screws ready, and location of holes already marked on ground) and finally place glasses on spigots -see pictures - Due date: Needs to be done on Monday, 12 June 2023

remove and replace timber fence - Due date: Flexible

Need a basic fence and gate to help contain dog in back yard but give easy access. Can use pool fencing or similar as will take it down when we leave. It's approx 4-5 metres including the gate. Tasker to supply all materials - Due date: Needs to be done on Tuesday, 9 May 2023

remove hardwood timber fence with termite infestation and replace, hopefully, with maintenance free fence

My 13-metre wooden fence has almost fully collapsed into our backdoor neighbour's bushes. It is an old fence and probably has to be replaced and not repaired. - Due date: Flexible