Find a fence installation professional in South Adelaide

Make and install a Colourbond gate as per red outline in photo. Height 1.6m approx. Opening width 1.1m approx. Note the existing C section on one side of the opening is not vertical and will need to be corrected or replaced. Requires a person handy with fence systems with necessary tools. I am happy to share ideas including where the gate and 2 posts with base plates can be purchased.

I have purchased a good Neighbour fence just need someone to install it.

I have an existing colour bond fence but would like the height increased and so want a wooden fence installed in front of it. Could use the posts currently in place, or may need to dig approx 7 bore holes for wooden structure. I may be able to assist if needed.

We have the bottom wire strand missing after being damaged. It is approximately 14 metres of wire, the lugs are intact each end. We would like to replace with SS 316 grade. I will need to advise wire diameter.

Supply and completely install colourbond fence. Including installing posts. 6meters x 1.8cm Easy access Would like it done soon if possible Cheers

I am wanting to put a gate at the end of my driveway to make my yard safe for my dog. I am in Seaview Downs. I am hoping for a metal picket style. Is it possible to have a quote please?

Install two fences: 125 cm (H) x 176cm (L) and 125 (H) and 276 (L)

Need glass pool fence installed including gate all supplied 3.4 meters total

Supply and install side gate

Remove current brush fence and replace with a pine plinth fence approx 180 cm height x 8mtrs. Needs a gate also to be placed.

Build a simple box chicken run along existing fence line. Yard is fox proof already, can use large star droppers, timber or steel posts for structure but all wire edges must be pet-safe, there must be a simple door, and wire must be flush with garden bed edge and be at least 30cm into ground to prevent pets digging their way into the enclosure

Glass balustrates or pool fences installed on my deck.

We need a lockable gate installed into a colourbond fence. Photos included here but please ask any questions you may have in order to quote.

My husband has shattered two glass panels trying to put them in! Help!

Remove old fence,build new corrugated iron post and rail fence design and build garage with remote roller door

Need someone install this door. All materials are here, need to remove a fencing sheet add the pole and install the door in the picture.

Fencing (5 metres) and gates(4 metres) looking for something similar to photos - possibly up to 10/11 metres of good neighbour style colourbondwith 1 x 1 metre pedestrian gate, 2 x 1.6 metre driveway gate in a modwood style slat finish…

We require.a gate between two walls 970mm apart. We want a black metal bar gate with vertical bars, ideally matching our balcony balustrade. The gate can be drilled into walls on either side.

I need a wire trellis installed on back fence. Like in the photo. You will need to supply wire/fasteners etc. distance is c8m. Needs to go from top to bottom of fence

Install small panel of good neighbour fencing between a corner of the garden shed and the main boundary fence. No concreting required. Measurements are approx. 1800mm x 450mm (top) x 430mm (bottom).