Find a fence installation professional in Inner West Sydney

Supply and install gate to match existing gate

Looking for an experienced gate/fencing/aluminium installer to modify and install an existing aluminium slat pedestrian gate into an existing rendered/masonry front fence opening. IMPORTANT: This job is ONLY for modifying and installing the existing gate I already have. Photos, measurements and mockups are attached. Please review the attached mockup/reference images carefully for the expected final appearance and alignment. Opening width: * approx 92cm top * approx 93cm bottom Existing gate width: * approx 91cm What is required: * assess best mounting solution * cut/modify gate width/height if required * install and align gate properly * ensure latch/handle sits at comfortable/natural height * final gate height and alignment should visually match existing fence style as closely as possible * supply/install posts/channels/mounting solution if required * ensure smooth opening/closing * neat/professional finish Existing items already supplied by me: * aluminium slat gate * latch/lock * TruClose heavy duty hinges Hinge details: https://www.bunnings.com.au/truclose-self-closing-heavy-duty-safety-gate-hinges_p4150119 Notes: * rendered walls currently on both sides of opening (not existing fence posts) * installer should advise best mounting approach * looking for clean professional result matching existing white slat fence style * please review all attached photos carefully before quoting Please include in your quote the full cost to complete the entire installation, including any additional or missing materials/hardware/components that may be required. This includes: - labour - any posts/channels/brackets/anchors required - any gate modification/cutting required - any materials required for a complete finished installation Please also confirm expected installation approach

Remove and replace gate with locking mechanism keyed from inside and out

Timber gate has rotten. After quote for colourbond OR timber gate including hardware

I would like to get a gate installed at the side of my house. Something similar to the attached images. Size is Roughly 2.8m wide x 1.95m high.

Broken gate inside building needs either replacing or repair

I need this 4m wide by 1.8m high colourbond in colour Surfmist gate replaced with double sided lock, it’s two doors. Can use existing posts.

Looking for someone experienced in fencing or landscaping to replace existing brush fence attached to a brick boundary wall. Current screening is old, leaning and falling over in sections, so it may require full replacement rather than repair. Approx. 9 meters total length and 0.6 meters high. Open to recommendations on the best replacement option, including other durable privacy screening solutions. Scope may include: - Removal/disposal of existing material - Supply and installation of new screening - Reinforcing supports/frame if needed Please provide: - Quote (labour + materials) - Suggested solution/materials - Availability - Phots/examples of similar work Happy for you to come onsite first to inspect and assess the best approach before finalising a quote. Timeline is flexible but ideally would like to get done by mid-July.

Hi, I’m looking for an experienced pool fence/glass installer to modify and reinstall part of my pool glass fencing. Scope of work: * Move the existing pool glass panel approximately 60cm closer towards the pool * One adjacent glass panel will need to be replaced with a shorter/custom-sized panel to fit the new layout * Supply and install suitable glass spigots/base mounts (glass clamps/base supports) * Reinstall and align all glass panels securely * Ensure the installation complies with pool safety requirements and Australian standards Please quote including: * Labour * Removal of the existing glass panel/fence section * Disposal and removal of one unwanted glass panel * New custom-sized glass panel * Glass hardware/base mounts * Full installation Experience with frameless pool glass fencing preferred.

I need a professional to remove an existing Colorbond fence and install a new 15m timber boundary fence in Leichhardt. Key Requirement: The top of the fence must be perfectly level/straight, despite a ~300mm drop in ground height over the 15m run. The Job: Removal: Remove and dispose of 15m of existing Colorbond. Installation: Supply and install a 15m long timber fence. Height: Starts at 2.0m (high side) and ends at approx 2.4m (low side) to maintain a level top. Posts: Galvanized steel posts (Mix of 2.7m and 3.0m lengths to account for height/slope). Base: Reinforced concrete under-fence plinths. Plinths may need to be stepped or doubled at the low end to close the gap. Finish: Lapped and capped treated pine. Site Details: 15m length, 400mm fall, easy side access. Please provide a quote for labor, materials, and disposal.

Small (8m) fencing surrounding a dog wash, damaged by a car hitting it. Exisiting posts need to be removed and new posts fixed with chemset bolts. New panels to be cut to size and installed. The job is at Haberfield, Sydney, but the new panels and posts to be collected from Marrickville, Sydney.

Wooden gate is solid but the bottom hinge has come loose (top one has a longer hinge plate and seems intact for now). Need to install a new hinge plate and screws on the bottom and maybe another one in the middle as a backup - in case the top one becomes loose in future too. A longer hinge plate may be needed given some of the wood appears to be splitting

Would like a hinged gate cut into the balcony, enough for one person to come in and out of.

Wooden picket fence built and painted. Pedestrian and driveway gate built as well. Fence posts are all in except 1. That will be completed along with last of the brickwork by us. Fence materials will be provided by us. You will need your own tools including tools to cut posts in the ground already to size. Measurements are provided in the first photo. Budget set is just for posting as unsure. There is a sample picture of fence we want-last photo.

Need to extend a fence line along the side of the house approx 3 m long x1.75 m high and provide a removable panel at the end of it for access to the side of the house.

I need a new fence constructed from wood and installed, dimensions 70cm x 2m, install latch

Supply and install 2x gates to the sides of the house

We’re looking for a handyman to install an outdoor side access gate on one side of our house, to match the existing gate setup on the other side (see photos). We already have the gate and metal post supplied. The job will involve: Installing and securing the post to the concrete Hanging and aligning the gate Fitting hinges and latch to ensure smooth operation Matching the positioning and finish of the existing gate as closely as possible Access is a narrow side walkway between the house and fence. Looking for someone experienced with gate installation who can ensure it is level, secure and functional. Please bring any required tools and fixings.

I live in an apartment with a terrace that connects to a shared planter area. I have an indoor cat and need a low-height, secure, renter-friendly barrier installed along the planter edge of my balcony. The barrier will likely be lightweight decorative panels or screens (e.g. faux greenery / lattice style). It needs to be: • Secure against wind • Safe (nothing that could fall) • Removable / no drilling into common property • Installed along soil / planter edge and braced against my balcony wall I’m happy to purchase materials based on your advice, or reimburse materials if you source them. Experience with balconies, gardens, or pet safety preferred.

External gate frame water damaged and needs to be replaced. Material costs to be reimbursed seperate to fee