Find a fence installation professional in Leichhardt NSW

Build new timber fence / replace existing. Fix 3m of fence Install 1 new post on fence Add 2 gates - 1 low and high Hardware required Install 2 x timber gates and associated latch hardware. Materials to be paid by myself in the day.

# Timber Picket Fence & Gate Replacement — Quote Request **Location:** Inner West, Sydney NSW **Task:** Replace existing timber picket front fence and matching pedestrian gate. ## Scope of work - Remove and dispose of existing white timber picket fence and gate (approx. 14m total run) - Supply and install new timber picket fence in a similar style — simpler/plainer pickets rather than the ornate pointed pickets currently there - Supply and install new matching pedestrian gate with latch (and hinges to suit) - Approximate measurements (see photos): - Section A: 2.81 m - Gate opening: 1.14 m - Section B (side run): 9.99 m - Total: ~14 m including gate - Existing fence height and post spacing can be used as a general guide (photos attached) - Note: an olive-green Colorbond side gate adjoins the fence — this is separate and **not** part of this job ## Site details - Concrete path/driveway along the fence line - Some garden beds and plantings border sections of the fence — please allow for care around these - Existing masonry/rendered front fence pillar is not part of the job (fence ties into it) ## What I'm after - Fixed-price quotes including materials, labour, removal/disposal of old fence, and any council permit advice if required - Preferred finish: primed and ready for paint, or pre-painted white (happy to hear options) - Flexible on timing — not urgent, just gathering quotes at this stage ## Photos [Attach the 4 photos: fence sections with measurements + street view of the property frontage] ## Questions for tradespeople 1. Do you recommend treated pine, hardwood, or another timber for durability in this location? 2. Typical timeframe from acceptance to completion? 3. Do you handle council/strata approvals if needed for a front boundary fence? 4. Warranty on materials and workmanship?

Remove and replace gate with locking mechanism keyed from inside and out

I need a professional to remove an existing Colorbond fence and install a new 15m timber boundary fence in Leichhardt. Key Requirement: The top of the fence must be perfectly level/straight, despite a ~300mm drop in ground height over the 15m run. The Job: Removal: Remove and dispose of 15m of existing Colorbond. Installation: Supply and install a 15m long timber fence. Height: Starts at 2.0m (high side) and ends at approx 2.4m (low side) to maintain a level top. Posts: Galvanized steel posts (Mix of 2.7m and 3.0m lengths to account for height/slope). Finish: Lapped and capped treated pine. Site Details: 15m length, 400mm fall, easy side access. Please provide a quote for labor, materials, and disposal.

I need a professional to remove an existing Colorbond fence and install a new 15m timber boundary fence in Leichhardt. Key Requirement: The top of the fence must be perfectly level/straight, despite a ~300mm drop in ground height over the 15m run. The Job: Removal: Remove and dispose of 15m of existing Colorbond. Installation: Supply and install a 15m long timber fence. Height: Starts at 2.0m (high side) and ends at approx 2.4m (low side) to maintain a level top. Posts: Galvanized steel posts (Mix of 2.7m and 3.0m lengths to account for height/slope). Base: Reinforced concrete under-fence plinths. Plinths may need to be stepped or doubled at the low end to close the gap. Finish: Lapped and capped treated pine. Site Details: 15m length, 400mm fall, easy side access. Please provide a quote for labor, materials, and disposal.

Handyman/builder required to customise a baby gate to fit the bottom of our stairs. We did have a baby gate installed on the stairs but it was broken easily because it wasn’t screwed into a stud and there doesn’t seem to be a stud in the part of the wall we need the gate to be attached to. Therefore, I believe a piece of wood needs to be used and cut to shape to secure the gate to the wall. I require a builder/handyman to install a secure gate. The stairs are wooden and there is metal railing with glass.

Need professional fencing/gate company/person to (by 18 December): 1) remove existing broken swing gate at side entrance of residence (see photos) 2)procure and install a new aluminium slat swing gate with lock (exact type and colour to be agreed) Gate dimensions are roughly 90cm W x 180cm H.

Wrought iron heritage gate needs new brace added to bottom and pivot installed. Post needs to be replaced. Gate needs to be aligned so ball roller works easily, Essential that offers are from those experienced with wrought iron. Offers from previously posted deleted job welcome.

Install letterbox within fence. Will require cutting hole in timber fence.

Replacement the fence including rusty columns and painting.

I need a metal gate to be installed on the existing post. I have purchased the gate and strap and hinge set. I can pay for timber screws and installation cost.

Quote needed for removing and disposing of an old colour bond boundary fence in back garden 14m long. Replacement with a treated pine paler panel fence with concrete plinth and posts -14m long and 1.9m high. Could be either capped at top or ended with matching pine lattice extension. Fence is next to some border plants but can cut some down if needed. Boundary will be marked out by the surveyor. Located in Leichhardt. Garden access from lane.

4m wrought fence replaced by timber or other. Alternatively wrought iron gate repaired.

Remove old metal fence panels (9.4m) and associated timber rails, replace with new rails and pine timber panelling. Old fence posts are still good enough to support new fence.

Demolish existing fence approx 30m and remove rubbish Supply and install treated pine 1800 palings with capings 50x50 steel posts Must be licensed and insured

Wooden gate has had its top hinge pulled out of the gate post due to windy weather. A long fence paling adjoining the gate post has also split as a result. We require the gate to be reattached to the gate post and the fence pailing to be replaced.

Remove an existing timber side gate and buy/make a new timber one and install it.

I need a Paling fence 12m long X 1 mt

Horizontal post on white picket fence has rotted 1/3. Either need to do a repair on this part or replace and re-drill pickets. Pickets must match existing design as we are in a heritage conservation area.

Install 5 Showerscreen panels 1 m wide Fixed panels