Find a fence installation professional in Chatswood

To install a double gate (2 panels, poles and hardwares provided) on a driveway. Total Width= 2.5m, Height=1.8m: -core-drill one pole into ground - attach one pole to existing side fence of property -install swivel brake caster wheel (provided) to support the 1.5m side of the gate -install hinges to panels (2) of the gate (bi-folding opening) -install both latch lock and digital lock -install drop pin (into ground) to position gate while shut.

We have just purchased a sureguard dog e-fence kit and need someone to install it for our front fence so our puppies don’t escape

The existing fence runs along the front of the pool only, and is approximately 12 metres long. I need the old fence and gate to be removed, and replaced with new aluminium fencing. The old material should also be taken away.

I’m looking for a quote for a swinging driveway gate, 2.8 m wide and 1.1 m high, that opens inwards. The gate will have timber slats installed on the frame. Please provide a price based on these specifications. The amount I’ve allocated is indicative and not exact just looking for a ballpark figure.

The gate details. Height: 180 cms Width: 120 cms Wall to wall width: 128.5cms The gate is not supplied. Please quote for the gate plus installation. The third photo shows the type of slat gate I require

Looking for someone to replace a broken pool fence panel, approx. 1050mm wide x 1200mm high x 12mm wide. Please supply and install a compliant replacement panel.

Looking for a labourer to assist tomorrow (Tuesday) with demolition of small timber fence (approximately 5 lineal metres) and building replacement timber fence. Should be done in less than a day. Happy to pay for the day regardless how long it takes.

Create a timber frame for composite cladding (supplier Space Haven) and attach it to timber fence. Cladding is 2.9m high and comes in 22cm widths (ie 5 per metre). There are some plants to work around for installation but plenty of free space to build frame. Approx 8.5m to be installed. A couple of lengths will need to be shortened at the top to accommodate a tree branch.

Replace the car place and replace posts

Hi, I need someone to install some basketball hoops and posts at a school in Chatswood. The posts will need to be cemented in. Ideally someone who can get an assistant with them on the day.

I need a small fence built on my property to keep our small dogs in.

Need to replace existing gate and posts with a slatted/open variation that supports airflow Dimensions as per below: Wall to wall is 3670mm Gate only is 3525mm Height of gate is 1800mm

To repair/replace a leaning wooden fence post. This would involve a treated pine 3 rail fence 1.8m high in standard single paling pattern (no lattice) Span would be 2x2.6meters. No need to replace lattice above section of fence. - Due date: Flexible

Supply and install colour bond fencing 44 m Panania, NSW 2213,

Replace dry rot affected pickets, railings and posts of regular height picket fence - Due date: Flexible

Galvanized post okay but horizontal wood bearers has rotten away and some pailings have fallen off. Need to replace wooden bearers and install new pailings. Fence is about 20m in length and need to remove all rubbish after project - Due date: Flexible

Replace wooden fence of about 8m in length plus 7m of gap in fence (L shape) - Due date: Flexible

Remove old fence & replace new 1.5m× 20m treated pine timber fence, take off 3 old steel posts & change 3 new rail steel posts. Must have licence & ABN fencing co.because the neighbour want. - Due date: Before Sunday, 9 October 2022

Two gates for install 2.67m and 1.2m. Height can be up to 1 m. Not fussed as it to keep dog and kids in the backyard. Material can be aluminium or timber. Temporary solution for 1-2yrs. Ground is soft - Due date: Flexible

Build a timber fence, remove old fence and build new one