Find a fence installation professional in Canberra

TURNER ACT 2612 Supply & install replacement 30m fence with wooden single slat fence.  Height 1.5m (or happy with alternate height if you have access to cheaper materials to substitute)  Include all necessary fixings and posts required.  Remove any existing un-useable components from site.  Cost to be collected from each neighbour (50/50 split).  Quote must be itemised to show costs, Access to site for quote is largely visible to view from street or I can meet you there at set time. The budget / cost needs to be defined by the tasked with any conditions included. Otherwise the offer entered will be expected for the completed job as described

We need fence for this front & side areas

I need an enclosed area built for portable pool. Needs to be around 4 x 6 m with self closing gate. Tubular panels in Monument required. Wooden posts preferred with sleepers under panel. One side (6m) has existing colorbond fence so no panels required on that side. Ground has a very mild slope so I want all the sleepers set to same height so the inside area can be infilled with road-base and then gavel.

Replacement of fence shared with neighbour and two gates installed. Possible lattice on brick work too. Noting price is a guess only.

Swing Gate over driveway. Supply and installation. 7 m wide area

Looking for an experienced fencer to install approx 25.1m of “Ekodeck 219 x 26mm 3.6m Carbon Batten Screen Castellated Panel” (available from Bunnings) in front of our fence. It cannot be drilled into the existing fence due to house rules, so will need a frame installed to attach the panels to. Although may need to work around this to install panelling on gate. 1. Confirm measurements. 2. I can arrange delivery of screening. 3. Cut panels to size in accordance with manufacturer guidance. 4. Install panels. Price is for labour. Will reimburse for posts separately. Prefer someone who has worked with this material before. Note the panels come in 3.6m long pieces - I can arrange delivery. We estimate we’ll need about 58 panels. There are some plants down the side that we’ll remove before work starts.

Install a Wooden gate on side of house

Its around 5-6 meters. Need advise and quote as old one was damaged few months back due to hailstorm, which one to buy.

Supply and install colour bond fence approx 16 metres 1.8

Back fence needs replacing. Wanting wooden replacement as both existing fences are wooden.

Need around 50m of colorbond fence 2m with sleepers, no gates. Existing timber fence needs to be removed Give me a offer to come and inspect

Install a wire mesh that extends one metre above the colour bond fence line.

A 1.8m hardwood paling fence with galv post set in concrete

replace existing chainlink fence panel...top rail, posts and bottom rail perfect condition. Just the chainlink panels need replacing.

Replace old switchboard with 600 x 600 panel and new RCDs for the existing circuits. Earth stake also needed. Can order and collect parts separately or bundle it all together if easier

Build/install a new wooden gate

I need new hardwood palings to my existing hardwood paling fence (around 62 metres). Job is to attach new 1.5 metre palings to existing 1.7-1.8 metre hardwood fence that will raise the height of the fence to 2.2 metres. In addition, a wedge restraint/tilt batten is to be installed on to the top rail for 30 metres.

Good morning. I need to install a new fence gate, and I'd like the material to be aluminum alloy. Is there someone who can come to check the requirements and provide me with a price quote?

Need a new fence built for a residential house. Will require an onsite quote. Must be a fencer and have relevant insurances.

Replace existing metal gate with a colourbond gate. I will require supply and install. Opening is approximately 175 cm from the bricks to the existing fence.