Find trusted local electricians in Wantirna South

I want new power point on first floor of my house

Need to get the lights and switches installed as following: a. 3 B22 bulb holders in the kitchen above the bar, suitable for hanging lights, showing the picture. b. Light above dinning table as shown in the pic. c. A pair of light in the bedroom or drawing room, hanging from the ceiling. d. Quote separately for the chandelier light. All lights come with fitting material. Electricians need to run wire, supply and connect switches, fix the lights to the ceiling and make them operational. A certificate of installation will be required.

We need data cable to be installed in the roof from front of the shop to the back around 30 meters

New build - Supply and Install new downlights - Install outdoor & indoor lights (Supply ready)

Need to make a light attached to a fan work.Tried a new globe, but it is not working. The issue could be in the wiring or the switch.

To connect electrician to a new food trailer Will you be running a generator, if so, what size & how many generator inlets Yes, i will buy this generator, with 7000W continuous power. it has 1x 15 Amp 240 Volt outlet and 1 x 32 Amp 240 Volt outlet for the deep fryer https://www.mygenerator.com.au/product/maxwatt-9kva-petrol-generator-with-electric-start-2-wire-auto-start?gad_source=1&gclid=CjwKCAjw68K4BhAuEiwAylp3ksjsP-oxTAz9Eememv8R6h8U9Qc-FtP3UsuIpix0s9guirYgjZPTYRoCjvkQAvD_BwE I will need the followings: Supply and installation of 32A generator inlet * Make up and Supply 5m 32A lead for generator to inlet * Reconfigure switchboard to adhere to AS/NZs 3000:2018 regulations including upgrading circuits to individualised RCBOs for 15A outlets * Fitoff of 4 Double powerpoints, 1 x 15A GPO for deep fryer * Replace light fitting to adhere to Australian standards * Fit off client supplied exhaust fan What will you be running? Coffee machine, Ovens etc, and will you require 15A powerpoints? I will have : underbench freezer/fridge, Deep fryer 20l 3000W 45kg Ice maker 200W 18l urn 1500W Cooker 1350W Light and exhaust fan POS system Sink Water heater How many lights do require? only 1 light Is there any existing electricals inside the food trailer? yes, an underbench fridge/freezer

fix old light switch, fix tv aerial outlet, smoke detector compliance. compliance certificate for sell property.

I have a 4x4 and the indicators are now not working.

Light in the display Sushi Fridge is flashing and there is 2 transformers.

Need to replace a light in the void area with a chandlier. The height of the void is around 5.5m.

Check power supply. Voltage fluctuations - Due date: Flexible

I need an electrician to connect domestic power to a new deck under construction. Rough plans and a diagram are available on request. Work to be done: - install new circuit from house switchboard to the deck. Cable length approx 30 metres. - supply and install an outdoor enclosure to house 4 GPO's (for LV lighting transformers), - install 3 x weather-resistant double GPO's near floor level (floor going down soon so sub-floor 2.5mm 2C & E cables have been installed), - install 2 x weather-resistant double GPO's in ceiling frame, - install 3 x up/down sconce lights, - install a light switch outside, near existing door, to control LV lighting GPO's; wire as 2-way with existing indoor switch. *** Work must be conducted by an REC and a Certificate of Compliance must be supplied. - Due date: Flexible

Need help to replace old inverter with new and add 3 batteries. Old 6.5Kw Solar System. Need upgrade to new . 1. Replace the inverter because it can not add battery. 2. install the battery. -------------------- New inverter Growatt and Batteries have been purchased. Please quote . irgore listed price . have no idea about cost . Thank you . - Due date: Flexible

Have installed motorised alfresco blinds. Need a concealed power point in the ceiling for connecting the motorised blinds. the roof tiles are easy to move and alfresco is in a single storey part of the home - Due date: Flexible

We have 4 heather bathroom exhaust fan which needs to replace with proper exhaust fan (I will supply the new exhanust fan) + one of the LED light is not working (might need access the room and check the wiring) + Kitchen chimney (Euromaid) is not sucking fumes properly (would be great if you can have a look) - Due date: Flexible

Need electrician to cap off wire in ground - Due date: Flexible

Needing a new outdoor light.Thinkit’s been water damaged over time - Due date: Before Wednesday, 7 June 2023

Power points connected up around a new pagola

Switchboard upgrade to comply with today's standards. Disconnect and remove existing switchboard which was compliant at the time of installation. Under the Residential Tenancies ACT, it's required to Install new 8 module switchboard and associated safety switches and circuit breakers including labour, materials and independent inspectors fees. - Due date: Before Friday, 31 March 2023

7 existing old school light fittings and 1 recessed light fitting (see photos) to be replaced with new recessed downlight fittings including supply of white fittings and new LED globes. All redundant materials to be removed from site. Receipt and electrcal certificate required on completion - Due date: Flexible