Find local downlights installers in NSW

Need LED downlight in bathroom either fixed or replaced. Is less than 3 years old and suddenly stopped working

The downlights are plug and play. Someone needed with small ladder to replace 3 of them. Lights not provided see attached image for description. Each cost 10$ from bunnings.

Hi, I need to replace 4 LED downlights. They need to be recessed, warm and dimmable. Existing LEDS seem to be connected directly from driver to wire. Please specify if price includes lights or just not

We need a downlight fixed including wiring

Hello, We are looking for a licensed NSW Electrician to attend our retail store, in Narellan Town Centre, to diagnose and repair a flickering ceiling light. The Issue: A recessed LED downlight in our main optometry room is persistently flickering. The Job: The task is to find the cause of the flickering and perform the necessary repair to ensure stable, constant light. The scope of work includes: 1. Safely accessing the light fitting in the ceiling (a suitable ladder is required). 2. Diagnosing the cause of the flickering (e.g., faulty LED unit, failing driver, loose connection, or a dimmer issue). 3. Supplying and installing a new, like-for-like replacement downlight and/or driver if the existing one is found to be faulty. 4. Testing the light thoroughly to confirm the flickering is resolved. Requirements: - MUST be a fully licensed and insured NSW Electrician. - You must be able to provide your license number. - You must have your own tools, including a suitable A-frame ladder for a standard commercial ceiling. - The contractor must be able to supply a standard replacement LED downlight and driver if required. Location & Timing: Location: Narellan Town Centre, 326 Camden Valley Way, Narellan NSW 2567. When: The job can be completed at your earliest convenience. Please state your availability in your offer. Please provide a comprehensive quote for the complete job. Your offer should include all labour costs AND the potential cost of supplying one new replacement LED downlight. Thank you.

Looking to install downlights at my apartment and remove these commercial ones, let me know best price and if can supply lights

I need downlights installed in a double storey house but downlights are for downstairs. There's a entrance (3 downlights), living room (10 downlights), kitchen & dining (8 downlights), rumpus room (6 downlights). I need dimmable downlights.

Supply and install 4 Down lights 2 in lounge and 1 in each room

Hi i need a Sparky, to disconnect lighting make safe. I will take lights and brackets down. 13 in total total some just unplug Parking out front of building on botany road. Preferably tomorrow sometime. Can do after hours, or Tuesday morning. I have more work coming up so would be good to find someone i can trust. Can do hourly rate or fixed price. Easy access. The business is moving premises. I will assist you on the day be your lacky if needed.

I want to get downlights in garage and install two cieling fans in two bedrooms. Also install outdoor lights

Need a qualified electrician to install 6 downlights in the living room using the existing points that are controlled by 2 switches. Another 2 in the master bedroom, and 2 each in 2 bathrooms.

Hello, We are looking for a licensed NSW electrician to attend our retail store, in Albury, to diagnose and repair a flickering ceiling light. The Issue: One of the recessed LED downlights on our main sales floor is constantly flickering. While not a major safety concern, it is very noticeable and disruptive to the store's atmosphere. The Job: The task is to find the cause of the flickering and perform the necessary repair to ensure stable, constant light. The scope of work includes: 1. Safely accessing the light fitting in the ceiling. 2. Diagnosing the cause of the flickering (e.g., faulty LED unit, failing driver, loose connection, or dimmer incompatibility). 3. Supplying and installing a new, like-for-like replacement downlight and driver assembly if the existing one is found to be faulty. 4. Testing the light thoroughly to confirm the flickering is resolved. * Light Specification (see attached photos for labels): Please note: The successful contractor MUST be able to source and supply the correct replacement light and driver as specified above. The cost for these parts must be included in your final offer. Requirements: - MUST be a fully licensed and insured NSW Electrician. - You must have your own tools, including a suitable A-frame ladder. - Experience with diagnosing faults in commercial dimmable LED lighting systems is essential. Location & Timing: Location: Dean St, Albury NSW 2640 When: The job can be completed at your earliest convenience. Please state your availability in your offer. Please provide a comprehensive quote for the complete job. Your offer should include all labour costs AND the cost of supplying one new replacement LED downlight and driver. Thank you.

Hello, We are looking for a licensed NSW Electrician to attend our retail store, in Stockland Merrylands, to replace a faulty ceiling light. The Issue: One of the recessed LED downlights in our pre-test room has stopped working. The Job: The task is to replace the faulty LED downlight to restore full lighting. The scope of work includes: 1. Safely accessing the light fitting in the ceiling (Ceiling height approximately 4 meters - a suitable ladder is required). 2. Diagnosing the fault (e.g., failed LED unit or a faulty driver). 3. Supplying and installing a new, suitable replacement LED downlight and/or driver. 4. Ensuring the new light's colour temperature and brightness matches the other existing lights in the room. 5. Testing the new light to confirm it is fully operational. Please note: The successful contractor must be able to source and supply the correct replacement light as part of their service. The cost of the new light should be included in your offer. Location & Timing: Location: Stockland Merrylands 1 Pitt Street, Merrylands NSW 2160 When: The job can be completed at your earliest convenience. Please state your availability in your offer. Please provide a comprehensive quote for the complete job. Your offer should include all labour costs AND the cost of supplying one new LED downlight fitting. Thank you.

Replace two bathroom down-lights which are not working. This replacement works are to be performed by a licensed electrician as the wires are screwed to the terminal block of the downlight unit and a like for like replacement is required. The Live wire and neutral wire needs to be removed and inserted on to the new unit. I will supply the down lights complete Unit.

Need to replace 6 Down lights in apartment in Homebush west - I’m happy to supply the down lights or you can buy from Bunnings and I’ll reimburse for down lights

I need someone to change the downlight connection so i can use the downlight plugs. I have the light. I need to change at least 4

Replace 4 dimmable downlight transformers. Lights and fittings allready work. Glebe 2037

Require x2 downlights replaced - downlights can be provided. Currently tenanted

I need 25 down lights to be replaced.

Hello, We are looking for a licensed NSW Electrician to attend our retail store, in Newtown, to replace three faulty ceiling downlights. The Issue: Three recessed LED downlights on our main sales floor are out and no longer illuminate. This is affecting the overall brightness and professional presentation of our store. The Job: The task is to supply and install new replacements for all three faulty lights. The scope of work includes: 1. Safely accessing the light fittings in the high ceiling (approx. 3.5 meters). 2. Removing the three old downlight fittings. 3. Supplying and installing three new, suitable replacement LED downlights and/or drivers. 4. Ensuring the new lights' colour temperature and brightness match the other existing lights. 5. Testing the new lights to confirm they are fully operational. Light Specification (for sourcing a match): - Type: LED Downlight Deco, 13W Round, White, Dimmable, Warm White (from GoLights). See attached spec sheet. Requirements: - MUST be a fully licensed and insured NSW Electrician. - You must have your own tools, including an A-frame ladder or platform appropriate for a 3.5-meter ceiling height. - Experience with commercial lighting, particularly recessed LEDs, is essential. - The contractor must be able to supply the three replacement downlight fittings. Location & Timing: Location: 229 King Street, Newtown, NSW 2042. When: The job can be completed at your earliest convenience. Please state your availability in your offer. Please provide a comprehensive quote for the complete job. Your offer should include all labour costs AND the cost of supplying three new LED downlight fittings. Thank you.