Find experienced deck builders in QLD

12.7m x 4.5m flat section. I need this area to be decked out. I would prefer composite deck, but can settle for a timber one. I expect it to be installed and stained so that I dont have to do any maintainance on it for the next couple of years. I have attached a couple of pictures. One is the curent situation and the other is a visual/render of what I would want it to look like. I have a budget of 16000 AUD for this.

Looking to hire someone to build a low profile composite deck in the space shown below in the picture. Willing to source all building materials from Bunnings myself. Specifications - Dimension specs in the image. - Level w. tiles. Current height aprox 120mm. - Access via side gate. - Willing to pay in cash if cheaper.

Description: Looking for an experienced carpenter/builder to transform our covered concrete patio (approx. 40 sqm) into a modern outdoor area. ​Scope of work: ​Floor: Build and install a timber or composite deck directly over the existing concrete slab. ​Ceiling: Install ceiling lining boards (e.g. timber or outdoor-rated lining) over the existing metal roof/beams. ​Lighting: Install basic lighting/LEDs in the new ceiling. ​Please provide a quote for labour & materials (or labour-only if preferred).

I have a back patio which I would like composite decking put down. There is a concrete slab already there so you would be laying on top of concrete. Approx 50 square meters. I would need composite decking supplied as well. Price negotiatable.

Looking to replace the old composite decking with timber decking instead. Half of the current composite decking is in good condition, while the other half is falling apart. Looking to potentially replace only half, but interested in both full deck and half deck prices. The timber planks would be provided, however if you have your own and would like to quote the price for labour and material happy to consider too. All offers are welcome. Approximately 25 square metres

I am looking at getting a quote to build a composite deck for my back patio in white rock. Deck will be Approx. 3.57m x 7m. low to the ground approx. 100mm and covering existing concrete slab and extending over natural ground.

We are wanting a composite deck to be built. We would like two quotes for the different measurements to compare and two seperate quotes of supply and installing or if we were to supply only. Photos show the yard is not levelled, this will be levelled before completion of the deck to be built. Deck 1 measurements (just under an already existing alfresco area): 3710mm X 3500mm Deck 2 measurements (under the already existing alfresco area and extended out): 3710mm x 7700mm

We’re looking for an experienced and reliable person (or small team) to help transform a section of our backyard. Scope of works includes: 1. Site preparation Clear and remove grass, weeds, and any debris from the area Light excavation if required Level and prepare ground for deck installation 2. Deck construction Build a composite deck approx. 4.3m x 4.3m Install suitable footings/supports to ensure a solid, long-lasting structure Ensure deck is level, square, and finished to a high standard Experience with composite decking preferred 3. Gazebo installation Assemble and erect a gazebo (supplied by us) on top of the deck Ensure it is securely installed and aligned properly Additional details: Location: Sunshine Coast Access is straightforward (see photos) We will supply the gazebo; happy to discuss decking materials if needed Please bring your own tools and equipment Open to quotes (labour + materials, or labour only) Looking for someone who: Has experience in decking/landscaping/carpentry Can offer practical advice if needed Takes pride in quality workmanship Photos are attached for reference of the current space. Thanks so much — we’re excited to transform this area and look forward to hearing from you!

You will need to come onsite to quote - we will give address and details if you agree

Composite decking 3 steps front of the house less then 5 square meter.

looking for an experienced and qualified deck builder/carpenter to inspect, repair and restore an approximately 28 m² composite deck. Scope of work: -Remove selected top decking planks as required to gain safe access underneath the deck. -Inspect the existing wooden support posts and joists for rot, deterioration or structural damage. -Identify all affected timber and advise on any additional structural repairs required. -Replace rotten or compromised posts and joists with suitable hardwood timber to provide structural strength, stability and long-term durability. -Reinstall the removed decking planks securely once structural repairs are completed. -Pressure wash the entire deck to remove mould, dirt and surface build-up. Prepare the deck surface appropriately for painting. -Apply two full top coats of suitable exterior decking paint to the approximately 28 m² deck area. Quote requirements Please provide a detailed itemised quote covering: - Labour costs - All materials and timber - Decking paint and preparation products - Any fixings or other required hardware Removal/disposal of damaged timber and waste - Pressure washing - Painting - Any other costs required to complete the job Please only quote if you have experience with structural deck repairs, timber replacement and deck restoration.

Looking to have our deck extended to the fence from where it currently ends (Right hand side of the picture). Price to supply product and carry out the job. It currently has composite decking in a grey/blue finish. Dimension are: 3950L x 950W x 100H

To replace existing hardwood decking with composite decking approximately 100 m² of decking around the house. Labour only

The composite deck is sagging in and need lifting up. The support beams underneath are rotting but the deck is in good condition otherwise. The beams need to be replaced or reinforced. The composite deck needs to be unscrewed and folds up and then screwed back in to the new beams. Quote for labour only as parts will be dependent once opened up. Bunnings nearby. Need to have experience.

110 sqm composite decking installation, including installing subframe and decking Labour only

Looking to get pricing on composite decking done for our patio We can supply the material Area is roughly 10 x 5 meters

Looking for pricing on installing composite decking around our pool area replacing the tiles. We would also be wanting a glass pool fence installed. The length is approx 10m & at its maximum the tiles are 2.2m from fence.

Want composite decking installed at front porch. Its about 3-5m2. Exposed agg concrete substrate.

Composite decking installation work for outdoor patio,above the tiles levelling to our indoor house 🏠 floor to the patio area with the decking boards. Which is absolutely perfect and simple task just needed a handy guy to have them all done together and get boards installed. Wooden timber ready on site, which we have correct sizing, just need someone who is experienced in Composite decking installation. Size : 4400 x 4400 mm We got all materials Composite Decking, clips, screws, packers etc in hand, just looking labour work get this task done with experience in this composite decking photos 📸 attched to give you a clear picture of the project.

I am looking for a 2x2 composite wood deck built to put a spa onto. Needs to be flat and level so the ground underneath may need some leveling out. It currently has a garden bed on it and is slopey on one side. Kind of like the base in the picture below (ignore the vertical panel in pic)

we require someone who is honest and can replace decking boards that have become rotten or soft. Also some screws are lifting and have to be replaced. We don't want a new deck nor do we want any scammers. We have been told it's a one man job. Would suit a retired carpenter

Assist my hubby with completing timber pool deck. Job entails drilling, hammering, painting, framing & measuring and some lifting. Some experience in manual labour and use of a hammer would help! $200 is for 8 hour day.

Looking for someone to help me with building a timber deck. Work is available from Thursday through til Tuesday next week. Task includes, measuring and cutting timber, using power tools and lifting timber/decking boards. Must be fit, able to listen to instructions and be willing to work hard. Starting at $25 p/hr with the option of more if you are competent and show up ready to put a solid effort in.

Exterior deck and exterior front porch deck to be sanded and restained. Ideally decking boards to be fully stripped back using deck sanding machine rather than chemical strippers as it is close to the pool. Apply 1 coat Haymes Woodcare UVEX Primer and 2 coats Haymes Woodcare UVEX Finish Deck size is 3.6 x4.7m Front porch size 1.8 x2.2 Please note we would also love to get rid of the two massive pot plants in the pictures!

Repair 3x Timber knotholes in decking - see photos attached for sizing. Repair/ fill in needs to withstand high foot traffic area and allow for thermal expansion/contraction.

Supply materials and build marbau timber deck including appropriate foundations - approx 15m2, over existing brick area (5m long x 3m wide) appropriate builders license and experience required price negotiable, timeframe negotiable

I’m looking for an experienced professional to clean, sand and recoat the external timber decking, steps and other timber surfaces around my home - seeking quote including labour and materials, including availability and estimated completion time. Scope of work 1. Rear deck and steps Clean, prepare and lightly sand rear timber deck. Apply exterior oil-based timber coating (Sikkens natural satin), including spot-priming bare timber and applying two coats. Coat timber deck steps and risers where specified. Avoid/protect white painted fascia on deck 2. Pool stairs Prepare and recoat timber pool stairs, including the front faces and step treads. 3. Timber seat Clean, prepare and recoat the timber seat in the backyard, including the timber backboards and rear of the seat. 4. Front stairs and landings Prepare and recoat the front stair treads (top and front face only), protecting/avoiding white paint at edges. Prepare and recoat the three timber landings on the front stairs. White-painted fascia, stair sides and other white-painted surfaces must remain clean and undamaged.

need the edge of my timber deck cut back to a straight line so tiles can be laid against it. The deck boards were laid unevenly, so the edge isn't straight. • deck length: 10.5 m • Starting point is the far wall in the house. At that point the line needs to sit about 10-20mm from the reference, then runs dead straight for the rest of the length. • Accuracy is the priority. The line must be set out and cut precisely, as the tiles will butt directly against it. • own tools needed

Sanding timber decks and stairs - Front porch is about 2.25m x 4.9m. Back porch is about 2m x 2.15m. While I have put in a budget for this, happy to negotiate (reasonably) as I have no concept of what is appropriate for a task like this.

I have 3 areas to quote. 1. Timber tops across the top of the larger stairs, around a step-down to a pool deck and underneath pool gate. See photo named 1 IMG_4483 showing whole areq. The Merbau is 140mm wide. First the trim pieces around the outer pool deck: Lengths are as follows. 1. Across top stairs - 1300mm 2. Stair top to handrail - 650mm 3. From handrail along to small step down to deck - 2300mm 4. Side of small stairs down to deck - 650mm 5. Across top small stairs to deck - 1200mm 6. Side of small stairs down to deck - 650mm Secondly, underneath the pool gate: Here the pool gate and 2 adjacent side panels will need to be dismantled. Then the Merbau timber replaced. Then the the gate and 2 adjacent side panels reinstated. The length of this piece of Merbau is 2m See photos: 2 IMG_4477 3 IMG_4478 4 IMG_4479 - plus see sketch. TOTAL LENGTH of MERBAU - 8,750mm Lastly, The larger set of pine stairs needs replacing. See photo titles “6 Stairs” I will be wanting the angle of this stair changed as the stairs are too shallow and cause tripping, so I imagine one less tread, slightly steeper angle of stringers, plus the the base of the stringers to be on concrete pads to avoid rotting. Both stringers anjd all treads need to be removed and replaced with completely new treated pine timber.

I have a painted timber deck approximately 10m2 that needs to be sanded to be ready for repainting

Sand back and remove the existing navy paint from the timber deck, then apply a stain/oil. Nails will already be punched. I can provide the stain/oil, but you’ll need to supply all equipment required for sanding, prep and application.

Rear timber deck 3 panels need replacing

Hi. I need a 3m x 2m timber deck at the side of my house (connecting a deck that is already there to a concrete slab).

have 2 timber decks that need sanding only one 35m2 and one 10m2

Deck is roughly 6 m by 3m and made of merbu timber. It needs the current coating sanded to original timber and decorated with water based clear finish. It’s on the ground and is in good condition

Finish building a timber deck. Joists need noggins and ends trimmed. Timber decking installed. All timber on site.

I have approximately 70 square meters of timber deck that I want painted grey. I will supply paint it will need 2 coats. Needs to be cut in around some edges and it has 2 sets of stairs I have pressure washed the deck and it’s ready to go

Clean & Oil Timber Deck Looking for someone to clean up and oil my timber deck. The job includes: * Sweep and remove leaves, dirt and debris. * Scrub the deck to clean it and prepare it for oiling. * Apply 2 coats of decking oil for a nice, even finish. I can supply the decking oil and tools, or you can provide your own if you prefer. When you reply, please include your quote, availability, and any photos of similar jobs if you have them.

Scrub plant pot stains off a timber deck… please note that the property doesn’t have power.

My name is Connie, I am looking to get a quote for someone to help oil this deck for me. I am ideally looking for someone who has done this before (I've left it out of repair!) and can give me some tips on looking after a deck xD. If available during a weekday that would be great. The decking oil will be provided and I am not sure what else would be needed, if you have a sander or other equipment, that really helps. Not sure what type of price range this would be, in the Algester area, South side of Brisbane

Hi Need a quote for timber deck for length 10ft width 3 ft . Approximately. Very simple, material shall be provided.

I need you to install a timber deck, approximately 3m X 5m. I need you to install a garden shed approx 3m X 3m on that deck.

Looking to get quotes for a deck built in garden.approximately 3m by 7m