Find experienced local carpenters in South Adelaide

Need a Bikeriser (bike Mount) installed safely in the garage on the wall. Qualified carpenter is preferable for this task. It seems like a pretty straight forward install by I just don’t trust myself to do it correctly. Thanks in advance :)

I need my kitchen cabinetry modified to install a fully integrated 60cm dishwasher. The existing cabinet opening is approx 55 cm wide, so i need about 5 cm extra space take from the right side by removing/moving the partition between the cabinets. I also need to provision a power outlet for the dishwasher. So if you can do both , that’d be great. Tasks - Provision Electrical for dishwasher - Modify cabinetry to fit 60cm dishwasher ( Order and install required laminex panels if required) - Install the dishwasher. * Price is negotiable Final outcome should be something similar. https://youtu.be/vDYCE-Os2RM?si=7jE5SjCixuodLMn1

Need to replace 2 x old timber that birds have chipped away at (approx 1.5m to 2m and the other 4m) Timber will be pre painted, you will just need to cut to size and replace the old one for the new one.

The ceiling in outdoor pergola x2 is showing significant leak type stains. Want to fix root cause of the problem. Not sure if it's gutters or ventilation. Both roofs have spinning air vent.

I’m looking for an experienced carpenter/builder to help with a shed/house renovation project. Scope of work includes: New wall construction: - Build internal timber-framed walls (bedroom, bathroom layout) - Basic external wall framing (simple finish – budget build) Simple, budget-focused design - Plans available and can be shared IMPORTANT: - Not a full build – I will organise plumbing, electrical, kitchen, and finishes separately - Looking for someone cost-effective and practical - Open to staging work (demo first, then framing) Please include: - Your experience with similar work - Rough quote or day rate - Availability ✅ Doors: - Create door openings - Install basic internal doors Project details: - Approx 60–70 m² area

I have 4 teak chairs which have some sentimental value and I would love to make a chess set for myself and one for my son for Christmas who I will be visiting internationally in early December. The amount listed is for 1 chess set and board, with the 2nd to be completed next year. I would really love to see what type of work or skill level for the carvings that you have to do this piece. The chairs can be delivered anywhere in Adelaide for the work.

We have 2 double door carcasses that need fixing to the ceiling and walls above our fridge. They need to sit inside the alcove flush to celing and walls. Attached to rafters in roof and studs on walls

In order to fit my fridge into the space, need some help to: - Remove skirting board on the sides of fridge cavity. ( fridge is 880mm, fridge cavity including skirting board is 900mm) - Either build a small cabinet on top of fridge OR shorten the existing one OR move the cabinet higher. The existing cabinet has been removed but can be reused. The existing cabinet is only a few centimeters long. We were told the hinge mount could be tricky to remove since it is stick to the cavity right now( see photo) - paint the cavity if needed and move the fridge in. Please quote for labour only. Ideas welcome!

We want drawers, cooktop, grill and fridge added to our alfresco

Build a hallway organiser for our entryway like the photo provided. 2.08m length, warm timber like Blackbutt or oak. Please supply the timber including varnishing / oiling it and curve one edge like the photo. Alternatively this link has a beautiful one too! https://alandimo.com.au/journal/diy-timber-floating-shelf-coat-rack

Repair rotten timber under window and secure loose vertical board. Bottom timber is damaged and needs partial replacement( probably 3-5 timber). Also need to fix and secure the loose panel. Quote…. Location: Aberfoyle Park

Need to cut cabinet to make space for the dryer in the laundry area

Hey guys I need this cabinet shelf modified. Its too close and snug with the washing machine in and it vibrates the whole house. Its a simple vanity shelf and cypress post that needs to be cut back 100mm Work required. - remove cypress post, its screwed in with 50mm timber screws - remove shelf and cut back 100mm or remove shelf take out side and cut back 100mm - there are 90x45 pine framing holding the shelf off the floor which need to be cut back 100mm also. - reinstall cypress post using backets already there - re install shelf The purpose of this is to add 50mm gap either side of the washing machine. Payment breakdown is for 2 hrs labor 75 x 2 - $150 Petrol $50 Other materials contingencies $30 Total 230 Thankyou

We bought product from China. Half way done, need to help with finishing product by installing drawers and cabinet door.

2 walls to be re skirted as well as if the backing needs doing also

Studwall with door internal Fencing

Current fridge cavity is in built in wood facing cabinets and I need the height increased by removing a book shelf and moving it up a few centimetres to take a higher fridgefreezer

Kitchen cabinet bracket broken and needs repair

Water damaged poles and beams need replacing

Looking for a reliable handyman for a few small jobs around the house.Tasks include:
• Minor internal painting (touch-ups / small areas)
• Building an Easy Shed, including basic ground preparation
• Cleaning and staining an existing deckAll materials can be supplied if needed. Ideally after someone experienced, tidy, and able to complete the work over one or more days. Happy to discuss timing and costs.