Book a professional blind repair service in SA

I have 4 sliding doors that need curtains rails installed (there will need to be timber installed - as it is over a gyprock wall) I have 2 windows that need blinds installed (same as above will need timber)

Needing two bedroom blinds installed. Will attach photos for description

I have had new blind installed and it doesn't work I need them fixed so they work

Put blinds up at all windows

We’ve just moved into a new place and need someone experienced with window fittings to take accurate measurements. After that, we’ll buy ready‑made blinds or curtains and need them installed.

Replace broken outdoor blind, cheap temporary solution: I’m looking for someone to remove/replace the existing broken outdoor window blind shown in the photo. I’m not looking for an expensive custom blind at this stage, I just need a cheap, practical temporary solution for summer to provide shade and reduce heat through the window. Very happy with something basic such as a bamboo/reed outdoor blind, simple roll-up shade or similar inexpensive option. It does not need a winding mechanism, I’m completely happy to manually roll it up and secure/tie it when needed. Ideally looking for someone who can: * Remove or make safe the existing broken blind/awning * Measure the window and recommend/source a cheap suitable replacement * Install it securely to the brick/existing structure * Keep the solution as inexpensive as possible Will reimburse the cost of the blind/materials separately with receipt. This is intended as a temporary solution until I can afford to have a more permanent professional blind installed. I do have an old bamboo blind that could be used but also happy to fund alternative suggested material as negotiated.

Electric roller blind needs adjustment as it won’t close fully

I need help removing old blinds and installing 2 roller blinds in two bedrooms. The blinds are already purchased and ready to install. Each blind is approximately 1.2m wide. Installation only.Please bring your own tools.

Maintenance – Shutter & Blind Repairs 1) Kitchen: Repair the damaged shutter and repair/adjust the pull-down blind, which is not retracting properly. 2) Bedroom 4: Repair the damaged shutter and ensure it is operating correctly. 3) Lounge: Repair two shutters — one large standalone shutter and one smaller shutter at the front. 4) Lounge Large Window: Reinstall and secure the pull-down blind, which has come away from its mounting bracket and is currently stored behind the couch. Scope includes inspection, necessary repairs/adjustments, securing components, and testing all shutters and blinds to ensure proper operation.

Needing two roller blinds installed in bedrooms. Holden hill

Corner of my blind has become semi detached from the wall and is only being held by 1 screw. Need it to be secured again

Job 1:Two slats on Venetian blinds snapped and need replacing. Job 2: rod for draw string curtains needs to be screwed back on to fixture

Scope of work: Reinstall and securely reattach the blind Ensure the blind is properly aligned and operating correctly Check that the mounting brackets are secure and stable The blind is already on site and available for reinstallation. Please bring any standard tools and fixings that may be required to complete the job safely and securely.

Blind repair required – Lounge room The far-left blind in the lounge room is not operating properly. The chain is still attached, but pulling it does not raise or lower the blind. The operating mechanism appears to have failed and needs to be inspected and repaired or replaced if necessary.

I have 2 windows both 155cm by 155cm that need blinds installed. I’ve purchased 2 sets of blinds from Ikea that can be cut to the correct size and then installed. All materials provided

Blinds chain/cord replacement

The bottom metal rail of an indoor roller blind has detached and is hanging diagonally. The edge of the blind fabric may also be slightly torn. I need someone experienced with roller blinds to inspect and properly repair it, including reattaching or replacing the bottom rail/strip if required. Please include labour and any likely parts in your offer and confirm whether you have repaired this type of blind before. Photos attached.

See attached images for installation instructions. Window is high and I'm not comfortable reaching up that high. Install 1 x Tuiss Twist2Fit Double Roller Blind 1450mm width x 2400mm drop (recess) in a bare window. The window has nothing else there - no brackets or fittings. Window is shown in 3rd image

I’m looking for an experienced handyman to install one timber Venetian blind onto the face of an internal brick wall. Job details: * Install 1 x timber Venetian blind (hardware and brackets supplied) * Face-fix to a brick wall (not recess mounted) * Ensure blind is level, secure, and operates smoothly * Install the supplied child safety cleat * Attach the decorative timber valance

Need help drilling six holes through a lintil for a blind to be hung in our kitchen. Should be less than a five minute job with the right tools.