Find a reliable appliance technician in The Gap

I need a licensed gas fitter to remove my old gas cooktop(LG) and install a new one. The new cooktop fits the existing space and is ready to be installed. Please provide a quote for the complete job.

My Bosch Dishwasher (SMV50D00AU) isn’t heating up. Approx 7 years old. The full wash cycle runs normally but just no heat in the wash. The machine beeps 5 times at the end, and then repeats that beeping every few mins for a while. I’ve checked the filter and inlet hoses so suspect it’s a broken heat pump. Looking for an initial price to come and diagnose. Also want an agreed price in advance if it is the heat pump for it to be replaced. This way I have the confirmed initial price and the price to fix if that is the issue.

Hi! I was cleaning my oven and incorrectly reinserted the side racks. Now, the mounting pin/threaded screw on the wall of the oven is spinning freely along with the fixing nut, making it impossible to unscrew and remove the side rack. ​I need someone with proper tools (like locking pliers / vice-grips) to hold the threaded pin still and unscrew the nut so the side rack can be removed and repositioned correctly.

I have a tandoori oven with a heat ceramic interior. It has a gas set up but I do not know what type of gas. I want to use it as a lost wax firing kiln and to melt brass, bronze, copper and aluminium. It needs to reach 1100 degrees C. It will need a ramp soak kiln controller. I am looking for a gas plumber and also an electrician to do the work. Please provide a quote.

I need someone to assemble my Enders 42cm Cozo 2.0 gas heater. https://www.bunnings.com.au/enders-42cm-black-cozo-2-0-patio-gas-heater_p0409681

Appears to be leaking in cupboard and needs repair

We need help installing the washing machine. The hoses supplied with the fisher and paykal unit are too short. Need an extension for both waste line and inlet hose. Super easy job - I just don’t have time

Already have the new cook top. Just need it installed

Wine cooler has power, display and temperature settings work. Condenser is operating. Fan works, just not cooling. Repair and re-gass, if economical.

My washing machine is making an unusually loud noise and requires someone experienced to fix the issue. It could be as simple as something small lodged in somewhere where it shouldn’t be? It’s a Fisher and Paykel front loader- 9 kilo

The refrigerator is a Westinghouse Virtuoso Model No RS662T*1. The freezer section is working, but the refrigerator section is not.

Service line trimmer on site. Trimmer works but conks out after 10-15mins run time and won’t restart again until cold. $125 including any new parts (spark plug, fuel line etc.) Model: Makita RST210

Bosch series 6 has clogged drain filter that’s jammed and hard to undo - lots of YouTube videos. Need experienced help to resolve

The oven temp knob on the outside of our old (most probably from the 80) St George Imperial oven has broken. The outer plastic part of the knob has broken and the metal base of the knob is not reflecting the accurate temp of the oven as even though looking like it's back to zero the oven has been staying on at a low temp. We have turned it off at the fusebox for the time being so it doesn't stay on. So the whole knob likely needs to be replaced either by one of the other knobs to the right of it possibly as they aren't used or a replacement knob that we're not fussed if looks different to the others. Cannot find a serial number on the oven but have provided pics.

A new selector switch needs to be installed by a qualified electrician on DeLonghi Oven.

Our IKEA single pull out tap and dishwasher connected. Pipes capped ready to go so most plumbing part already completed. We just need it connected.

Task: Install Fisher & Paykel 8.5kg Front Load Washer (already onsite) Hi there, I need a reliable person experienced with installing front load washing machines to install a Fisher & Paykel 8.5kg Front Load Washer (WH8060J3) at my home in The Gap. The washer is already onsite, still in the box, and just needs to be unpacked and installed. All pipes and connections are already in place — it just needs to be connected and properly levelled. Easy job. Installation requirements: -Connect water inlet hoses, -Connect and secure drain hose -Level the machine so it sits stable and does not wobble -Test the machine to ensure it runs properly Tools required: -Adjustable wrench -Pliers -(Optional) Jubilee clips / hose clamps for securing the drain hose No old appliance removal needed. Preferred timing: Any day this week after 3:30pm (before Sunday 7 December) Please only offer if you are confident installing front load washers. Thanks!

Disconnect old dish washer and upright gas cooker and connect to the new ones. Then move the old ones downstairs or happy for you to take them.

Installation of 3 x ring security cameras. Exterior locations- into plaster/bricks. Own tools will be required.

Dishwasher drain block repair