Hire a professional washing machine repair service in Potts Point

Make a hole in a cabinet to plug washing machine and plug it by adapting the tap system to a washing machine system. Need to supply the connection. - Due date: Before Sunday, 26th Sep 2021

i need a washing machine replace board

Require washing machine to be drained and unblocked. Washing machine won’t drain.

I had a custom cabinet built to house a Washing Machine. It is approximately 10cm too wide and 10 cm too deep. I need someone to test putting the washing machine in the cabinet (when it arrives), and measure how much we can take off in depth and width (height doesn't matter). Then, disassemble the cabinet, cut it down so we remove the excess size (from the back and sides and doors), and edge any edged sides that are exposed. For doors its simple, we just split the door size reduction on both doors (ie. if its 10cm too wide), we cut 5 cm off each door on the edge where the doors meet (so no need to mess with hinge cutouts). The space is very small so I'd like the diassembled pieces taken offsite cut and returned. If the person doing the job doesn't have cabinet making facilities, they could take it to Mr. Plywood in Alexandria to do the cuts and edging. One side of the cabinet will be covered in tiles. This side is MDF and needs to be sealed by painting all edges in white for water protection. It may be easier to use edge tape on the uncovered sides. I will include some pictures. The washer is coming tommorow. I need this job started asap (ideally Monday or late tommorow - Saturday). The cabinet can then be reassembled early next week when done. Someone might ask why am I doing this. The answer is that the space is tiny and every cm counts as its a tiny apartment and bathroom.

Assemble bed head - tools are included in the box. Should only take half an hour

I need to have installation of non existing washing machine plug in my kitchen

Hi I have a samsung washing machine that does the wash properly but isn’t able to dry Comes up with error message HE2 If you are able to fix this please let me know Thanks Rob

My 5 year old Bosch serie 8 washing machine has stopped working. When this happened the door locked itself and the power turned off. I have worked out how to unlock the door but the power no longer works. Require someone to assess and if possible, fix.

Haier brand front loader washing machine leaking from door

I need a reliable plumber to finish the install of bathroom for a washing machine. We have 2 existing taps for washing machine in the wrong position. Rather than trying to damage the wall and move them, we agreed that we will run pipe from the two existing taps down through the cabinet and fit them underneath so they can be used for: 1) Washing machine (hot and cold) - should be plumbed for both but currrent washer only needs cold 2) Mixer tap feed (from under the cabinet) to the counter top basin we purchased 3) adapt the current drain to support both the washer and drain for countertop basin 4) fit basin mount mixer tap The controls for the water should be from under the cabinet. We can then hide the pipework on the front with a cover piece. I really need this done asap... tommorow at the latest. We have the basin, mixer tap, pop up waste and holes already cut as per instruction. There is around 10cm clearence between the washer and the top of cabinet to make room for drain as per instruction.

I need a skilled cabinet maker to build a washing machine cabinet including doors. Assuming the person can source the materials, however if they need assistance can help. Please include materials cost for this cabinet and the doors (benchtop and corner cabinet I will cover). The cabinet will house a EWW7524ADWA (Electrolux) front loading washing machine. The cabinet will raise the washing machine from the floor by around 10 cm and must be strong. Onset doors will be installed (2 doors) to hide the machine away. Mosiac tiles will be placed on the left hand side of the cabinet and the two front edges of the frame (tiling will be done by a different person). I've attached a diagram to give you a rough idea. Legs must be used to support the base holding the washer, so we can hide some of the drain plumbing. The doors will be inset mounted... The room and my place is very small, so I'd suggest most of the work be done offsite if possible. I intend to place a Stone Benchtop on top. Co-ordination with Stone supplier is part of the job. I will also purchase a Kaboodle corner wall cabinet to go above this unit. Please estimate effort to install with your quote. Feel free to ask questions.

Need someone who can install a small pipe drain for a washing machine. Taps are already installed, but there is no drain. Ideally some kind of pipe that the washing machine hose can slot into to discreetly behind the sink. Please see photo.

Looking for an electrician to disconnect a three phase power oven from the wall. Would also be great if you could help me disconnect my washing machine because I have no idea how to do it.

Seal rubber leaked. need to be replace. - Due date: Flexible

It is a front loader Brand is Haier “FA error code”

I am based in Pitts Point. Washing machine is a front Loader - 7.5kg. Haier Brand. Model; HWF75AWI I am getting an “FA” error message. This is an error to do with the water level sensor circuit. Need assistance with having this repaired . Thank you.

Hi. I’m looking for a plumber to connect a dishwasher and washing machine in an old apartment. I would normally do this myself, however the fittings are old and therefore I need someone qualified/experienced. Please let me know a ball park figure.

Button for start/ pause will not work button seems broken.

I have moved my washing machine and it is working but the water error is showing. I think it needs something done at the tap...

I have just had a washing machine delivered, it needs to be hooked up and a screw put in the bottom of the base cover Small light machine but I have hand injury and can’t do it Should only be 10 min job