Find a reliable appliance technician in Hunter Valley

upright arcade cabinet with a persistent buzzing/static noise when powered on. We've already replaced most of the major components trying to track it down, including: Amp Raspberry Pi unit + power cable Gameboard Power cord Sound unit Aux/audio cables (x2, different batches) The buzzing stops when the amp is turned off. It also persists when the 3.5mm audio cable is plugged into an external device (phone), which rules out the cable and amp being the source. At this point we're confident it's a grounding fault somewhere in the wiring or cabinet. Most of the hard work is already done, just need someone who knows their way around arcade cabinet internals to locate and fix the grounding issue.

Decommission an electric oven with a gas top plate and install a new electric oven with induction cooktop

Onega cookwear not turning on

small frt load washing machine inverter board repair

Replace an electrical cord on a vacuum cleaner

remove 900mm westinghouse canopy range hood and install new 900mm westinghouse canopy range hood

Chuck away chest freezer & plug in new one. Assemble TV table.

Gas Fitter Required – Extend Natural Gas Line to Kitchen & Install Gas Cooktop Location: Ashtonfield NSW Looking for a licensed gas fitter to extend an existing natural gas line to my kitchen and install a new 60cm gas cooktop. Property Details: • House is elevated on stumps/piers with crawl-space access underneath. • Natural gas is connected to the property. • Existing gas services already supply a gas hot water system and gas heater. • Kitchen is approximately 10–15 metres from the existing gas connection point. • Photos of the gas meter and existing internal gas connection are attached. Scope of Works: 1. Run a new gas line from the existing natural gas supply to the kitchen. 2. Install customer-supplied 60cm gas cooktop .link 👇 https://www.thegoodguys.com.au/electrolux-60cm-black-ceramic-glass-gas-cooktop-ehg645be?utm_pmaxpaidsearch&gclsrc=aw.ds&gad_source=1&gad_campaignid=20288282065&gbraid=0AAAAACuCjWVobBypQYBqKoEY4e6ZPuY_u&gclid=Cj0KCQjwrZTRBhDSARIsAHidYfcE8aqZPQaWGopmQzGoaRtxuj1Wv0llct5N3ejKOs6gxHLm6diTZpcaAjyTEALw_wcB 1. Disconnect and remove existing electric cooktop (leave old unit on site). 2. Connect new gas cooktop to gas supply and Install all required isolation valves, fittings and regulators if required. 3. Pressure test and leak test the completed installation. 4. Commission the appliance and ensure it operates correctly. Please advise: • Whether any additional materials or work are likely to be required. • Your experience with similar installations.

Quote to repair 3 tvs, microwave, vacuum and computer

Replacing old dishwasher.

My dryer is currently stuck with the panel having all of the lights on and I can’t get it to reset and choose a setting. I have a boshce series 4 dryer and I have tried all of the troubleshooting on google. So next step is to get someone that knows what they are doing to come and check it out. It should be something easy! Willing to pay someone $50 to come and check it out and get it going for me again.

I want to install a 600 mm range hood, but the old central cabinet should be removed and refited so that range hood will fit in and duct 150 mm can pass through i need some joiners or carpenter to do this

The electrics do not work.

Repair the Tabletop Machine controls by reconnecting and redoing the machine cabling. Please follow the guide here:https://drive.google.com/drive/folders/1f01rZTg3QzpEBdscahRG4bhz-Y9gUWcQ?usp=sharing

Looking for a general handyman to repair a juice blender. Video instructions will be provided. Handyman with general food equipment or electrical experience is preferable.

Scandia Aurora 74" electric fireplace. Install in lounge room internal wall. Wall appears to be drywall and timber frame construction, old weatherboard cottage. There is already power in the wall. Single phase.

Blast and prime a diff housing, I can drop it off.

Need licensed electrician to hardwire electric oven. There is currently an existing power point directly behind the oven location. Looking for someone qualified to disconnect/remove the plug setup if required and hardwire the new electric oven safely and compliantly. Details: - Existing power point already installed - Oven is already onsite - Looking for installation and hardwiring only - Must be licensed and able to provide compliance certificate if required Please provide: - Your availability - Approximate quote - Confirmation that you are a licensed electrician

Cord replaced or just plug

Remove old hose reel and install new one. Old hose reel has stripped screws.