Hire reputable rangehood installation and ducting services in VIC

Need a handyman to modify/cut down the overhead cabinet above my gas cooktop so a new rangehood can be installed at the required compliant height. Ideally looking to alter only the single cabinet rather than replace all the overhead cabinets. Then install the range hood I have purchased

Remove the existing rangehood and install the new one. Simple model 60cm slide out rangehood

Hello, I'm looking for someone to install a new Bellini 60cm slide-out rangehood. I've removed the old rangehood and purchased the replacement. The front of the new unit fits the cabinet opening perfectly, but the centre section sits slightly short of the side cabinetry, so the cabinets may need to be built out a little to provide suitable fixing points. I do have some laminated timber available if needed. There is already an existing power point from the previous rangehood. I'll also need an external duct/vent installed, as the old rangehood was not externally vented. I'm located in Pakenham. Please let me know if you're able to help and provide a quote. Thank you . Single story . Tile roof . External wall directly behind I'm located in Pakenham. Please let me know if you're able to help and provide a quote. Thank you

I need the range hood installed as the kitchen guy did not measure it properly it does not sit straight in, been told it needs two timber pieces to be drilled in so it can sit flush, really would appreciate someone who knows what they’re doing to install it, I also I need a whole cut out for the smoke to go out to the vent to the wall as they did not cut the hole out for that..

Need to put a new rangehood in the kitchen. Need advice on the correct rangehood to purchase, removal of old rangehood and installation of new rangehood.

Looking for a reliable and trustworthy handyman to install a new kitchen rangehood and to install an external vent. The old rangehood has already been removed, and a new slide out rangehood has been purchased. A small adjustment to the existing cabinetry will also be needed to ensure the new rangehood fits properly. Located Pakenham

*2 person job* Replace existing non-functioning rangehood with a new unit (already purchased). This is an ISLAND rangehood with an existing 150mm duct (same as the new one). The new unit to be installed is a Kleenmaid RHSCKL92 (Dimensions: 898 W x 598 D x 730-1230 H). Price includes removal of old unit (disposal preferred but not required) and installation of the new unit.

Need a tradesman to core-drill a precise 150 mm round hole through an external brick wall for a kitchen rangehood duct. Must use a diamond core drill to ensure a clean finish without cracking the surrounding mortar. Once the brick is cut i need rangehood to be installed. The wiring for rangehood plugging is already there

We need to install schweigen silent rangehood. We already got rangehood needs replacement with silent rangehood model pic attached..kitchen is on top floor. Tiled roof. Thanx

Purchased a Westinghouse WRF610SA 60cm rangehood but the hole sits further back than the old rangehood so isn't just a simple straight swap. Also the current PVC is apparently a hazard so looking at different duct replaced possibly all the way to outside cowl, cover boxes inside to hide the ducting. Looking for an experienced rangehood installer/handyman to do this task

Replacement of existing 90cm kitchen rangehood I require a qualified tradesperson to remove and install a replacement 90cm Fisher & Paykel HC90PLX4 wall-mounted rangehood. Job details: - Replacement of existing 90cm rangehood in the same location - Existing rangehood is already ducted externally — no new venting or roof work required - Existing ducting and electrical connection are already in place and should only require reconnection - Existing kitchen splashback is ceramic tile (care required when drilling/mounting) - Remove existing rangehood and install new HC90PLX4 - Connect existing ducting and power, secure mounting, and test operation Please provide a fixed labour quote, availability, and confirm that you are licensed/qualified to complete the installation.

I am hoping for a quote for the installation of a new rangehood in my own home. I have a 60cm slideout rangehood that is currently ducted into my roof. I am purchasing a Bosch DFS067A51A with Sirius semi-rigid ducting and a roof cowl. I need this ducted to the outside via a straight vertical run. I have included some images of my current setup. Let me know if you have any questions or require further information. I currently have a gas cooktop but will be changing to induction. Measurement from the top of the gas cooktop to the bottom of the rangehood is 570mm. Measurement from bench top to the bottom of the rangehood is 610mm

Rangehood installation 60cm

Remove old 90cm Trinity range hood and install 90cm Schweigen range hood. Unsure if old range hood is hardwired or plugin. Date to be confirmed once new range hood arrives

I have a old slide out rangehood and want to replace it. Measurement when slide in -90 x33 Cm and when slide out I'd is 90x 45cm Need to understand if only slide out can be installed or an undermount can also be installed. Need to tell that which rangehood suits and I will buy it before the installation date

i just need vent installed from roof to the kitchen

Installation of new range Westinghouse rangehood. No electrical work required, GPO already in situ. No vent installation required, vent already in situ. Plus installation of two shelves in shower and toilet

The new 60cm standard rangehood (Omega 60cm Slide Out Rangehood ORT6WXA) needs to be installed. The old rangehood has been already removed, but the cabinet opening is only around 49×27 cm and needs to be enlarged.

I have an exisiting rangehood that needs to be removed and new one installed

Remove existing rangehood, discard it, install the new IKEA rangehood