Hire reputable rangehood installation and ducting services near you

I am after a Gas cooktop and Ranghood above it. I have pulled the dishwasher where the gas cooktop needs to be installed and the rangehood in cabinet above it. Installation needs to be done by certified professional. Sizes Gas Cooktop 600mm by 600 mm Vented Rangehood 600mm by 300mm that pulls out to 600mm. I have given example photos Offer to explicitly mention if they can supply and install or install only. Appliances need to be black colour if supplied or I can supply and quote install only. Gas meter is nearby approx 6m from this kitchenette.

Need the range hood installed above bbq

Install a new rangehood for our kitchen

install ducting and rangehood. use existing hole outside of house for ducting outlet. cut new hole internally highlighted in yellow. connect ducting from inside to outside physically install new rangehood. i will arrange electrician to connect power. suggest a cheap rangehood for me to purchase

Due to a recent new rangehood, there is some cosmetic damages around the flue area - so need to patch this up and just make this cosmetically look better

I need someone to install an exhaust duct for my existing kitchen rangehood so cooking smoke and air can vent outside.

Install of a Westinghouse slideout rangehood into new kitchen cabinetry. We would like to duct the rangehood out the external wall directly behind where it will be installed. There is no existing ducting from a previous range (current range recirculates). The kitchen is on the second floor of a raised Queenslander, meaning that the external ducting point will be quite high (see images included). We are hopeful this can be done by ladder without need for scaffolding. You would need to supply the ducting kit/wall kit. New cabinetry will be installed on the week beginning 2 November, so we will be ready for range install either later that week or around 9 Nov.

Install range hood. Would like someone to come measure and provide suggestions on which size range hood we should purchase and then install.

I have a rangehood and need ducting run up through a tiled roof

Need to install new rangehood with duct. Duct to run through roof cavity and down the eaves. This run is 2-3m to the eaves. Easy access I need you to supply duct and external eaves grille

Need someone to install 60cm fixed range hood. No need to remove old one as it has already been taken down.

Replace and install the slide out Westinghouse 90 cm rangehood. The existing rangehood is old, and I have ordered the same model as a replacement. Please remove and dispose of the old rangehood.

We just bought an Omega Rangehood . As our Kitchen was built before 2023 the distance between the cooker and rangetop is under 65cm. We need someone to trim the current cupboard and install the hood.

I want someone who can remove the existing slideout rangehood which is connected to a duct as their is a vent outside and install a new slide out rangehood. Same size, nothing different just a new one.

QUOTE ONLY: Please remove old rangehood and install new rangehood. No ducting required. Details: 1) Remove old Bosch 60cm slideout rangehood Series 1 2) Replace with new Bosch 60cm slideout rangehood Series 2 Photos attached

Need a handyman to modify/cut down the overhead cabinet above my gas cooktop so a new rangehood can be installed at the required compliant height. Ideally looking to alter only the single cabinet rather than replace all the overhead cabinets. Then install the range hood I have purchased

Remove the existing rangehood and install the new one. Simple model 60cm slide out rangehood

Electrician will provide Electrical Power Provision. You need to help to install the rangehood. Duct can be put through the back wall fence to face the open sky (1.5feet gap between my fence and neighbour fence). Refer to the rangehood model and and photo of the marked install area. In photo on top BBQ fence the light will be removed and power provisioned and connectivity will be provided by the electrician. There is a single phase power subboard under the bbq cupboard from where the power is coming through behind the wall fence. Here is the product link which is already delivered at my place. https://devanti.com.au/products/devanti-range-hood-commercial-rangehood-bbq-hoods-kitchen-alfresco-canopy-1500mm?srsltid=AfmBOopLn3QYoWKoIHgyG8NhZUBDnqNoxe6dgVsYgTlbliWxZs7b87qx

Hi, I’m looking for someone to install, including ducting for a new rangehood. The rangehood is a Smeg Victoria chimney-style rangehood, and there is currently no existing ducting to the outside, so a new ducted exhaust will need to be installed through eave. It’s a low set one story house. Tasker to provide ducting for room and external vent. There is a manhole for access. Electrical has been completed- they have installed a movable electrical outlet. The rangehood has already been purchased and onsite

I need an experienced handy person to install a re-circulating rangehood into an existing kitchen cavity. The rangehood is re-circulating (no ducting or electrical work required). The overall objective is to install the rangehood, but there are some anticipated steps (but I will require you to do all things necessary to install the rangehood within the agreed price): 1. The cabinetry has 2 ‘filler’ blocks obstructing the rangehood slot. These need to be cleanly removed without damaging surrounding cabinetry. I’m unsure how they are affixed to the surrounding cabinetry (by screws, glue or other). You may need to temporarily remove and re-hang the cabinet doors to get proper access. 2. Drilling new holes through the cabinet shelf, in order to align with the top of the rangehood, and securely mounting the rangehood unit. I will provide the rangehood and its standard mounting screws and the access to the power outlet, but cannot supply any tools or other materials. I do not require any ducting/electrical work, cleaning or removal of old rangehood. I’m looking for a total fixed-price quote to complete the installation.