Find a reliable appliance technician in Perth

Moving into new house and need the washing machine connected by plumber

Drain pipe has to be replaced on Panasonic front loading washing machine. I will provide replacement drain pipe. Washing machine needs to be installed. Please bring necessary tools

- remove and retain all Bosch transit bolts/support struts - level the machine with a spirit level - lock all feet - check drain hose height/siphon risk - run a rinse/spin test - check for leaks - confirm the machine does not walk or knock during spin

Need help to connect up a washing machine (may need a part to complete) and to re-attach fridge doors to a fridge

Our washing machine outlet pipe needs to be drilled through to allow water to drain

Fisher and Paykel washing machine error E 7:06

Fix broken fridge cord, severed wire

Hi there, My Smith Corona Corsair Typewriter has a ribbon vibrator which isn’t raising when keys are clicked. It also has a loose return lever which needs tightening. Seeking someone who can repair this in the greater Perth area.

We have recently purchased a property and would like to have the dishwashers (Bosch Series 6, X2) cleaned and serviced before we move in.

Description: Looking for an experienced appliance repair technician to diagnose and fix a noise issue with my heat pump dryer. Appliance Details: Brand/Model: Fisher & Paykel Series 5 8kg Heat Pump Dryer (DH8060P3) Setup: Stacking setup (dryer sits on top of a front loader washing machine). Easy to access the back by turning the dryer in place. Issue: The dryer makes a loud [squealing / grinding / thumping / rattling] noise whenever the drum spins. It still heats and dries, but the noise suggests a worn mechanical component (e.g., drum rollers, idler pulley, drive belt, or fan impeller). Scope of Work: Safely inspect and diagnose the source of the noise. Replace worn parts (I can source parts once diagnosed, or you can supply them—please state in your offer). Test the dryer to ensure quiet, proper operation. Requirements: Proven experience with Fisher & Paykel laundry appliances. Must bring own tools.

I need a licensed electrician to install and hardwire 2 identical Miele wall ovens. Job can be completed Saturday 5th or Monday 7th

wanting to get them both installed in a bathroom

I need a handy person to help install a new rangehood vent on an exterior brick wall. The existing round hole is a bit too small for the new vent’s spigot, so you’ll need to carefully enlarge the brick opening (just a few millimetres). I’ve already removed the old vent and have the new vent, wall plugs and screws ready to go. The job involves: * Enlarging the existing circular hole in the brickwork so the new vent fits snugly * Sliding the vent’s spigot into the duct and securing the duct * Mounting the vent flange to the wall using masonry screws and plugs * Sealing the duct connection with foil tape and finishing with exterior silicone for a weather‑tight seal * Cleaning up afterwards Materials: I will provide the vent, plugs and screws; please bring foil tape and any tools needed to enlarge the hole (e.g. masonry drill, chisel, grinder) and finish the job. Experience with brickwork and vent installations preferred.

Fridge is leaking water at front left-hand side base of unit. Need a diagnosis and pricing to repair. See photos.

Need urgent fix of leaking washing machine tap. Movers took machine out yesterday and came back to discover leaking tap

I need an experienced installer to remove an existing integrated dishwasher and install a new Bosch fully integrated dishwasher. The current dishwasher (ASKO) was poorly installed and appears to have been forced into the cavity, causing damage to the cabinet panel and adjacent cupboard. The original dishwasher (Miele) previously fit correctly, so the space should work with proper alignment. ⚠️ This is not a standard swap job. Scope of work: * Carefully remove existing integrated dishwasher (tight fit) * Install new Bosch fully integrated dishwasher (already delivered) * Attach and align existing cabinet door panel * Level and centre appliance properly * Ensure even spacing on both sides * Ensure door opens fully without rubbing cabinet * Do NOT force unit into cavity ⸻ Important (corner installation): This is a corner position, so door clearance and spacing are critical. A small adjustment (e.g. 10–15mm filler strip or repositioning) may be required to allow proper fit. ⸻ Looking for someone who: * Has experience with integrated dishwashers (not just freestanding) * Understands cabinet alignment and spacing * Is comfortable making minor cabinetry adjustments if needed Please confirm your experience with integrated installs when quoting.

To disconnect gas from old wahing machine. Must have plumber license.

Washing machine is very noisy. We have checked the rubber seal and the filter as well with no obvious cause. Person attending would need to have access to materials in the event something is required for the washing machine.

Conpletely uninstall a Fisher and Paykel double dishdrawer (model DD60DCX9) as I will be selling it. Ideally to be done over this weekend, 28-29th March. Flexible with time. Location: Dalkeith