Hire a reliable professional for microwave repairs in NSW

Microwave turning on but not heating up.

Something buzzing very loud in the electrical box for about half an hour & then fridge & microwave has no electricity

IKEA Kitchen install filler panel above PLUS Electrician to replace built-in mirowave

1. Recaulking the bathroom 2. Fix the built-in microwave has come loose and fallen out

Westinghouse 44L Built-in Combi Microwave. 900W microwave cooking with integrated convection and radiant grill functions - throwing sparks when microwave turned on. Model: Westinghouse WMB4425SC combination oven Issue: the unit is throwing sparks from the internal cabinet wall during operation, even when no metal objects are present. There was a build up if burnt food / grease debris that I cleaned and have replaced waveguide cover with 'universal' option that doesn't sit quite right, but still sparks. I need a quote for diagnostics call out fee + possibly the replacing of a waveguide cover or a burnt-out magnetron.

Description: Looking for an experienced appliance technician / licensed gas fitter to fix two built-in Fisher & Paykel appliances: 1. Gas Stove (Fisher & Paykel - Built-in): Main burner has stopped working for the past week (needs diagnosis and repair/unclogging/ignition fix). 2. Microwave Oven (Fisher & Paykel - Built-in): Internal light bulb needs replacement. Requirements: • Experience with Fisher & Paykel built-in appliances • Must be a licensed gas fitter / technician for the stove repair • Please bring necessary tools and let me know if replacement parts/bulbs need to be sourced

The appliance sometimes sparks/arcs inside like lightning and occasionally trips the circuit breaker when in use. Model: SMEG SCA45M2. Looking for a qualified appliance technician experienced with combination microwave ovens to diagnose and repair it.”

Looking for an experienced appliance/microwave repair technician to diagnose a Smeg built-in microwave in Bronte. The microwave powers on and runs normally — display, light, fan and turntable all work — but it does not heat food. This task will be completed in two phases: Phase 1 – Diagnosis / assessment The Airtasker task price is for the call-out and diagnosis only. I’d like the technician to inspect and test the microwave, identify the faulty component(s), and advise what is required to repair it. Phase 2 – Repair Once the fault has been diagnosed, we can agree the additional cost for: * Replacement parts * Additional labour required to fit them If the price is acceptable, I’d ideally like the repair completed during the same visit where possible, or otherwise as soon as the required parts are available. The additional repair cost can be agreed before proceeding and paid on the day. Possible causes may include the magnetron, capacitor, diode or another component, but I’m looking for someone experienced to properly diagnose the fault rather than assume which part is required. Details: * Brand: Smeg * Built-in microwave under bench * Easy access * Powers/runs normally but does not heat * Photos available Please include in your offer: * Your experience repairing microwaves * Whether you have worked on Smeg appliances * Your call-out/diagnostic fee * Whether you are able to supply and fit parts once the fault is confirmed (on the day) The advertised task budget is for Phase 1 diagnosis only. Parts and repair labour are additional and will be agreed after dia

Microwave is not working. It does not heat up anything. Would like it to be fixed

I’ve purchased a new Baumatic built-in microwave to replace an existing built-in microwave of the same brand: https://www.bunnings.com.au/baumatic-built-in-stainless-steel-microwave-28-litre-900w-bam28tk-2-stainless-steel-built-in-900-w_p1020031 The new microwave is almost the same size and the front panel/trim fits the existing space, but the cabinet opening is just slightly too low. As shown in the photo, the microwave can slide most of the way in, but the metal ventilation/duct section on top catches on the upper edge of the cabinet. It appears to be only a few millimetres short. I’m looking for an experienced handyman/cabinet maker to: * Check the fit and installation requirements and make any necessary adjustments/trimming to the cabinetry so the microwave can be properly installed and secured * Make sure the ventilation is not obstructed and the finished installation looks neat * Suggest an alternative solution if there is a better way to make it fit without modifying the cabinetry Please let me know if you’ve done similar built-in appliance installations before and what you would recommend.

Remove old fixing brackets and install new replacement microwave requiring drilling of holes for screw fixation. New microwave same dimensions as old one.

Looking for an experienced Miele approved/authorised appliance technician to diagnose and repair the microwave function on the H 6400 BM combination oven/microwave. The conventional oven is working normally - all heating functions and elements heat correct. However, the microwave fuinction is not heating at all. When tested of Microwave Solo at 1000W, the appliance operates normally (fan/ noises . light and countdown all works) but a cup of water remains completely cold. This appears to indicate a fault withint he microwave generation / high voltage circut and most likely is the magnetron failure or high voltage power supply / component supplying the magnetron. I am looking for someone who is properly qualified and experienced with Miele combination microwave ovens, ideally Miele authorised approved who can diagnose the specific failed compoenent and repair / replace it rather than simply recommenting replacment of the whole appliance. Model: Miele H 6400 BM tyoe BM 6010 M. -Nr.: 09951422 Please let me know your Miele experience / authorisation and whether you are able to diagnose and repair the magnetron/high voltage microwave system.

National/Panasonic NN-C988W microwave oven approximately 26 years old. Completely dead no display or lights. Pl check the mains/input fuse, thermal protector and control board power supply first. Major components not to be replaced without giving me a repair estimate first.

Need my Microwave repaired Model: Bosch innowave hmt9655au

1) Microwave button to open door was not working 2) Was fixed however, the button to "Start" is no longer working

Metal microwave surround needs fitted to cabinetry

powers on, but not heating

We are having some modifications done in our Kitchen to install a small cutlery drawer above our microwave oven (as a separate Airtasker Task). However, for that task to go ahead, we need to ensure the Power Point to our Microwave Oven does not clash with the new drawer to be installed. The current Power Point is in the top left hand corner of the enclosure, we require it to be moved downwards by about 100 to 150mm. I think the Power Outlet is surface mounted to the back of the enclosure, and from what I can tell, the power cable comes into it from the cabinet wall on the left hand side, which is the sink enclosure.

Hello, We are looking to have a small utensil drawer installed in our kitchen in Meadowbank (Ryde area). The drawer would sit directly above our small microwave oven, inside the current microwave enclosure. The new drawer cutlery drawer would be done in the style to match the existing drawers. As part of the job, the facia around the microwave oven enclosure would need to be removed as it clashes. Additionally, the power point inside the microwave enclosure, may need to be moved downwards by about 150mm. I have supplied photos, and a concept sketch of the proposed cutlery drawer. We would like to have someone come out and visit us on site, and measure and quote for the design. We are looking to have the job done in the next few months. We have in mind a budget of somewhere in the order of $1, 000 to $1,500 for this task. Regards, John Drake.

Miele Supratronic M752 Built in microwave fused and can not open the door