Find an experienced gas fitter in North East Melbourne

1. Moving gas pipe from ground to the wall for oven and gas installation 2. Moving kitchen tap hold and colder water up to down to install sink 3. Put one electric point near gas stove 4. install and connect gas stove,5. install and connect oven 5 . install and connect rangehood 6. install sink 3. 1 electric switch on the wall for oven

Hi, I’m having an issue with the gas cooktop. The two large burners occasionally go out after I turn them on. They seem to work initially, but when I place a pan or pot on the flame, the flame goes out. This only happens with the two large burners. Could you please let me know if you’re able to and fix this issue?

I’m looking for a licensed plumber/gasfitter with proper insurance to safely disconnect a 90cm Technika freestanding gas cooker/oven from the wall. Job includes: Safely disconnect the cooker from the gas supply Cap/seal the gas connection as required Pull the cooker out of its current position slightly out and leave it ready for removal Ensure the gas connection is left safe and compliant

Re termination of gas line

Remove old gas lifted from my old study chair

Smeg gas stovetop is not light flame on any of the heating units. You can hear gas being dispensed but no flame catches.

Gas line needs to be found - need someone with a copper pipe detector to find first. Once found fit off bbq and connect.

Technika 5 burner gas cooktop. Four burners work normally, but the large burner does not ignite, even with an external flame. I can smell gas when trying to use it. Looking for a qualified/licensed gas technician to inspect and repair it. Budget include the call out fee and labour.

Need to add a 3rd connection for a 3rd fryer in a commercial building Must be a qualified and certified plumber to complete works We will purchase Fryer for install. Will be a 2pan fast fry, lpg gas Must ensure there is enough pressure for 3rd fryer to function correctly, as well as all other gas appliances. Will need to cut away bench as well to allow for space of the fryer.

2 on the regulators doesn’t work when you click, but when you you external lighter it lights up the flames

Changing the freestanding gas cooktop and oven to an electric one. Need to disconnect the old one and cap the gas supply in order to install the new one. Do not need to takeaway the old oven.

Gas Stove is not igniting. 3 out of 5 Oven fan bake mode not operating properly Open to offers

Need a small kitchenette with gas connection and water connection at the deck area .

Looking for a licensend plumber to prepare our kitchen for demolition before our new IKEA kitchen is installed. * Disconnect the existing gas cooktop and safely cap/seal the gas line * Disconnect the kitchen sink and tapware * Disconnect the dishwasher (we are keeping the dishwasher, so it only needs to be disconnected and moved out of the way) I would like to have someone onsite this Saturday.

Looking for a licensed gasfitter/plumber for Lalor please, for a quote & availability for the below. I’m looking for someone to connect a new gas BBQ to the existing natural gas connection at my house. I believe it requires the BeefEater BB95140 natural gas conversion kit which I can purchase. I’m looking for someone who can: • Run the appropriate gas line/connection from the existing gas point to the BBQ • Install the required isolation valve and BBQ connection • Complete the connection and leak testing • Provide the required compliance paperwork/certificate Must be licensed to carry out gasfitting work in Victoria. Thank you.

Check my lpg cooktop at home, think I may have slight leak somewhere Plumber needed

I’m looking to replace my gas cooktop with electric induction one and require a licensed gas fitter to disconnect and remove existing gas cooktop, permanently cap off the gas line safely, and perform a full pressure leak check. I need VBA compliance certificate for capping and decommissioning the gas line after completing the work.

Looking for someone licensed for gasfitting to safely disconnect and remove an old gas stove. The stove is currently connected to the gas supply, so the gas line needs to be properly disconnected, capped/sealed, and checked to ensure there are no gas leaks.

Need gas detector installation NG Beagle 240v with powerled

Licensed gas needed to reconnect gas to the stove.