Find a reliable appliance technician in Illawarra

Washing machine gets stuck with E10 error need someone to repair it.

Disconnecting and pulling out gas BBQ and cooktop.

I need an experienced carpenter or handyman to remove one bottom kitchen drawer and make the necessary cabinet adjustments so a full‑size standard dishwasher can be installed in the lower cavity. Tasks Required • Remove bottom drawer including runners • Modify support rail if needed for full-height opening • Adjust or rebuild cavity floor to ensure the space is structurally sound • Reinforce cabinet sides after drawer removal if required • Prepare opening for standard dishwasher (600mm wide, full height) • Optional cupboard door install to match the existing frame on the other side Details • Two old DishDrawers have already been removed • Plumbing and power are accessible • Location: Wollongong • Flexible with timing Budget $250–$350 depending on carpentry required

Treadmill works well, but the belt is now noisy and sometimes slips. Make is a Nautilus T624 Treadmill. Used for personal use only. Bought brand new 5 years ago from an Australian company, but is no longer under warranty.

Homasa massage chair (older style) with corded remote. Chair still receives power but none of the functions are working

My new washing machine is in the garage. I need help moving it to the laundry room, removing the old washing machine and installing the new one.

12/240 power control board 240 volts not working

My rinnai fireplace is no longer working. It’s getting power but something wrong with the ignition lighting the gas. In addition would like a gas bayonet put into a parents retreat upstairs.

The plug part of the electrical cord of our Sunbeam Cafe series coffee machine has broken. Can you repair it!

Rebooking task between Lesa-Belle and Sol

I’m looking for an experienced joiner or cabinetmaker to assess and modify my existing overhead kitchen cupboards so I can install a new copper rangehood. My current setup is: * Current rangehood: 600 mm wide * Gas cooktop: 600 mm wide * Oven: 600 mm wide * New copper rangehood: 900 mm wide Because the new rangehood is 300 mm wider, it will extend approximately 150 mm past the cooktop on each side. The centre cupboard above the stove will need to be removed, and the cupboards beside it may need to be cut down, rebuilt or replaced with narrower cupboards. I would like someone to: 1. Inspect and measure the existing cupboards and new rangehood. 2. Advise on the neatest way to prepare the cabinetry before installation. 3. Provide a quote to remove/modify the cupboards before the rangehood is fitted. 4. Provide a quote to finish or rebuild the cupboards after installation. 5. Ideally create two slim matching cupboards or neat filler panels beside the new hood, so there are no awkward gaps and I retain as much storage as possible. The copper hood may require a separate rangehood insert and secure wall mounting. The electrical and ducting work will be completed by the appropriate trades—I mainly need help with the cabinetry/joinery before and after installation. Please bring experience with kitchen cabinetry and rangehood modifications. Photos of similar work would be appreciated.

installation of dishwasher

Fisher and Paykel Aero Sense clothes dryer hard to start spinning

Replacement of cracked seal on front loader washing machine

Getting kitchen installed need electrician to hook up oven and move a few power points in kitchen

My apartment's external laundry room has been recently demolished and so I now need my washing machine to be set up next to the dishwasher in the kitchen. The washing machine needs to be moved from the first floor to a second floor apartment. The dishwasher is currently set up, however both machines will be using the same tap, so they will need to be set up with a joiner. I should have all parts necessary to complete the installation.

Trying to change blade on my Bricksaw but it’s not working. Need someone asap to look at it and fix it

I need a microwave secured to the bench in my campervan so it stays in place while driving. It doesn’t need to be pretty, just safe, secure, and able to handle movement/vibration. It will need to be fixed to the bench top only (the wall is ply), so open to the best method to do this. The microwave is 9mm wider than the bench, so it would need to overhang slightly on the left. Bench between end and sink 448mm Microwave 457mm x344mm. It also needs to sit towards the back and not the front of the bench. Microwave is due to arrive either Tues 25/Wed 26 so it would need to be after then, and ideally before Saturday 28 if possible. Should be a quick job for someone handy. Happy to cover costs of materials/parts needed. I can bring the van to you if you’re within a reasonable distance to Wollongong.

Hi I have a handheld bidet already installed but still leaking. Need to install properly. T connector problem.

Need dryer belt fixed on Electrolux dryer. Have the part (belt). Need dryer back taken off, belt installed and dryer back in action. Thanks!