Find professional window and door services in South East Perth

I need an internal door supplied, hanged and painted

Replace metal/ mesh on fly screen door.

I want the roller door for this shed removed and replaced with 3 french doors with timber posts between the doors.

the rollers on the sliding door have broken and need replacement

align kitchen cabinet door, reattach hinge to front door fly screen

We have a bathroom door that seems to have expanded and contracted and is difficult to shut. The handle is also loose and needs repairing due to it being pulled too hard to open the door. I need the door and handle repaired.

I have 2 internal slab doors. They both need to be pre-machined with hinge recesses and handle/latch holes. The doors may need to be trimmed about 10mm as well. Install both doors as well.

I require 2 feature windows to be recaulked / sealed with silicone. It is currently leaking when it rains.

Re-Install sliding door track and pelmet, trim down the slate timber door to fit (will need new rollers to fit door and track from Bunnings).

Have a small shed that has two doors damaged during storms. Have 2 x new doors that need to be assembled and installed

Need a roller door installed on my shed. Have already hung but lost tension and need someone to come and finish the job

Hi I'm looking for someone to come and hang an internal door I already have the door just need it hung

Looking for a reliable handyman to reattach some horizontal decorative slat panels to our existing outdoor area as pictured. It’s a small decorative section - the missing slats section is 2.94m wide by 0.95cm height The panels were previously attached using Liquid Nails to these metal poles, but came loose and fell off during a particularly windy day. What needs doing: * Reattach the fallen slats to match the existing panels at the top. * Ensure everything is straight, evenly spaced and securely fixed. * Ideally use a fixing method that will withstand strong winds so they don’t fall off again. (Metal screws most likely best option). I’m open to recommendations on the best way to secure them, whether that’s drilling/screwing them into the existing metal poles/frame. I have all the original slat panels ready to go (the ones that fell down), but you’ll need to supply your own tools and any additional materials required (adhesive, screws, fixings, etc.). Photos attached showing the existing fence and fallen panels. There is a gap between the decorative section and the back fence of about 5cm (so they don’t touch, and the slats would be screwed into the metal pole only). Located in East Victoria Park, Perth. Please let me know your availability and whether you’ve done similar work before. Thank you!

We recently bought a really rough house and one bedroom door was missing. We have the new door and need an handyman/ carpenter to put hinges and handle please.

Task: Looking to fix two issues with my glass sliding patio door. 1. Repair loose/detached sliding door frame - The vertical side frame of the sliding glass door has come loose/detached (see green marking in photo). It is currently held in position only by the top latch. - Need the frame properly reattached and secured. 2. Replace sliding door lock - Existing lock and handle assembly is old and needs replacement (see close-up photos). - Supply and install a compatible replacement lock mechanism. Requirements: - Please provide a quote including labour and materials, or specify if parts are excluded.

Install 2x garage entry doors to replace existing damage doors. Also need short skirting board nailed/glued again. New locks required as well.

I’m wanting a Handyman to put new fly wire on my security door out the front on the porch but also I’m wanting an 8 inch square or approximately 20 cm² to be cut out of the security door on the left-hand side for my cat to go in and out and then to put a flap over the cut out. This will be used when the front glass door is open so the cat could go in and out through the security door during the day.

We are in the process of painting the outside of our house. However, some of the frog tape that we have used has been left a little bit too long and has become very stuck to some of the outside windows and drain pipes. I’m looking for someone to scrape/remove and clean all remaining tape and glue that is stuck. Please see photos for all the areas that need doing. You would need to bring your own tools and equipment to get this done. Completely flexible with dates.

Replace and Repair Tool Shed Door

Install new fly screen on 4 door panels