Find a professional gate installation in Surrey

6 field gates to be installed in woodland. Posts already set

Prepare, stain and varnish wooden side gate to match front door. 2 coats of clear boat varnish.

Stain and varnish side garden gate

Remove old brick wall, build new wall and install iron work fence and gate

Metal front gate needs its wall-latch reattached. It will require a masonry drill to affix to brick gate post. Have all parts - it's a straight repair.

Current fence panel needs to be changed so we add a gate into the straight section of fence to accommodate access for a mobility scooter. The other existing gate must stay (this can not be used for access as there are posts on the other side which prevent access for a scooter) Chertsey location and want it completed as soon as possible.

1. Removal and disposal of timber from garden and 2 wooden pallets. There are 2 strips of timber (both quite long as used to be part of raised beds) 2. Fix garden gate - there is one strip of wood missing as it has fallen off 1 we have the wood but it needs to be reattached I’d estimate gate repair 10 min job. I’d estimate removal of timber and pallets to take 15 mins (and then also disposal to dump eg Camberley recycling centre) so total within 45 mins-1 hour

Log cabin has been repaired. Need to treat new fascias on roof, door centre, areas where no stain inbetween logs all around small areas to work the stain in, inside treat floor. I have the walnut stain and the clear for the inside. Also fix gate which is not aligning with bolt and needs a metal receiver for the bolt so it doesn't keep dropping I think

Paint 9 panel front garden fence & posts with 2 coats of paint both sides and both sides of 2 garden gates and a bin store. Important no paint splatter goes on path or drive. Will provide paint, brush and protective coverings. Should take no more than 1 day. Job to be completed in one session. Experience & references preferred. Please don’t apply if you are outside of my budget by more than a few pounds. Thanks

Gates painted and railings also some more work

A newly purchased wooden gate does not fit. 1 inch too tall and 1/2 inch too wide… needs shaving down.

Fitting 4 baby/stair gates, building a flat pack shoe rack and fitting 2 USB wall lights in the kitchen

1 - fix a barn door that won’t shut properly. 2 - paint a front door / add a new handle / lock (I will provide) 3 - tighten a garden gate

I have 4 white gate posts that need paint with masonry paint

Hi, I need someone to anchor 5 pieces of furniture, hang a mirror, and install 3 baby gates. I have the anchors and baby gates

Remove old gate and fit a new double gate and a bit of trellis

Install baby gate at bottom of stairs

We are looking to refurbish both entrance gates located at either end of our residential road. The work will include: • Sanding and repainting of both wooden gates to restore appearance and longevity. • Full replacement of one damaged wooden posts supporting one of the gates. • Any necessary surface preparation and finishing to ensure a high-quality, long-lasting result. We are looking for a reliable and experienced tradesperson or team with relevant experience in gate refurbishment.

Installation of two babydan guardme stairgate for childproofing purposes. Will need some thinking of how to install as stairs have skirting and bannisters - see photos