Find a professional gate installation in Greater Manchester

There is a car port and the corrugated PVC roof has been damaged due to high winds. I would like the roof redoing with new corrugated PVC sheets.

I need to build two gate pillars out of bricks to support my aluminium gate. The pillars will need a foundation and will need to be 1.8 metres tall. The gate is an aluminium double swing gate measuring 3250 x 1800mm. I will provide the materials. The concrete foundation should be 800mm deep due to clay soil and the foundation footprint should be 650mm x 535mm approximately. Please make me an offer for this job as the price is indicative.

I’ve purchased a baby pressure gate from Argos that’s easy to install — no drilling or tools required. I need it set up securely between the kitchen and living room in an open-plan space. Should take under 30 minutes. Flexible with timing this week.

Need old ones taking off and new ones putting on. They metal gates not wooden .

I need metal gate posts and a metal drive gate fitting

Looking for a handyman to install a child safety gate in East Didsbury. Holes need to be drilled and screws inserted to fix the gate. The gate is the "Safetots Diagonal Fit Baby Gate". A picture shows where we would like the gate installed.

I need my fences in my back garden painted, approx 16 panels plus the gate to match.

Looking for a handyman to install 2 child safery stair gates. Holes need to be drilled and screws inserted to fix the stair gates. The upstairs stair gate is the "Safetots Diagonal Fit Baby Gate". Holes need to be drilled into the staircase bannister and the diagonally opposite wall (see picture). The downstairs stair gate is the "Regalo Easy Step 124cm Extra Wide Baby Gate". Holes need to be drilled into the bottom of the door frame and opposite wall. I tried screwing into the wall but the threads did not bite, so I think it will need wall plugs (see picture).

Hinge has detached from banded gate and needs refitting and new lock

Two stair gates to be fixed to a wall One upstairs One downstairs IKEA besunge bed to be dismantled enough to allow for storage in garage

There are 4 ft and 5 ft and 6 ft panels which require cuprinol. The wooden gate is unsteady and requires attention.

Looking for someone to install a unifi gate opener unit to an already installed NICE gate motor.

I have an automatic gate set that needs to be installed at our house on the gates in the driveway. I am unsure on how to do it. I would like some help on it.

I have a set of old iron gates that are slightly too big for my gate posts so need cutting and re-welding. They are 1470mm each, I need to remove one of the 100mm gaps on each to fit between posts distance of 2880mm.

External wooden garden gate (approx 180cm high) has gone rotten down one edge where exposed to elements. Rather repair than replace if doable.

I want to install a lock system in my garden gate which can be opened from both sides. Possibly need to realign the wooden frame for this work.

The back gate needs fixing

Back gate has come off brick (now massive hole in brick) Need help getting it fixed and in

Wooden gate fitted and supplied front and back of property

Installation of baby gates upstairs and downstairs because my husband is lazy