Find a fence installation professional in Greater Manchester

I need to build two gate pillars out of bricks to support my aluminium gate. The pillars will need a foundation and will need to be 1.8 metres tall. The gate is an aluminium double swing gate measuring 3250 x 1800mm. I will provide the materials. The concrete foundation should be 800mm deep due to clay soil and the foundation footprint should be 650mm x 535mm approximately. Please make me an offer for this job as the price is indicative.

I’ve purchased a baby pressure gate from Argos that’s easy to install — no drilling or tools required. I need it set up securely between the kitchen and living room in an open-plan space. Should take under 30 minutes. Flexible with timing this week.

I need metal gate posts and a metal drive gate fitting

Looking for a handyman to install a child safety gate in East Didsbury. Holes need to be drilled and screws inserted to fix the gate. The gate is the "Safetots Diagonal Fit Baby Gate". A picture shows where we would like the gate installed.

Currently there are x3 6x5 panels and x1 half panel. There’s 3 concrete posts; 1 leaning left and 2 leaning forward. If they can be straightened great. I’d like either strong waney lap fencing or vertical type of fencing.

We need to replace a few fences

Can you build a small chicken run

Take out the existing concrete post and put in the new one, also the concrete panels.

Garden gate was destroyed during windy weather we need a new gate installed

Fence is on top of a wall so new fence would fit on top of wall

I have wooden fence that fall down. I need a new one with someone who would install it- about 4 panels of wooden fence

Fix fence around around garden

Replace three 5foot wavney lap fence panels

Re-site concrete post and base so fence panels fit. Labour requested to help owner do the job.

I am looking to replace 6 fence panels and the concrete posts. Each panel is 6ft by 6.

Measure gate pillars, install new iron gate(gate not provided ) and repaint (paint provided)

I need to get 6 fence panels replaced. Fence panels are 6ftx6ft panels. Please quote for materials (panels) and labour. No concrete dividers are needed as you can use the existing ones.

3 fences need installation.2 About 6x5 in size, I needs to be cut to size to fit into small one. These are wooden fences. Existing fence post in place, just need to slide into it. They are kid of heavy for 1 person. Might need ladder to slide into the post(can provide ladder) It should really be a 15-30 minute job

Build a 1 metre tall fence , on my drive

Install wooden posts into ground and/or attach to existing concrete posts (which also have metal covers). Install gate with latch.