TV Installation & Setup Jobs in Westminster

Browse through over 500 TV Installation & Setup Jobs.

See what you could earn

£0

per month

Based on average tv installation & setup task prices. Actual marketplace earnings may vary

Why join Airtasker

Join Airtasker

TV Installation & Setup tasks in Westminster

Check out what tasks people want done near you right now...

Our (new) rural home operates 100% on rainwater. Six water tanks (2 sizes, 15,000 litre and 20,000 litre) are filled by rainwater from the 550 sq m roof via a 100mm pipe. The filler pipe is directed to the first tank in the "tank farm" (under the house). Water flowing into the first tank is then distributed to the other 5 tanks via 40mm and 50mm pipes at the base of the tanks (one 40mm and one 50mm between each tank). The roof is approximately 7 metres above the 100mm "spout" into the tank (noting that it is a charge system, the water dropping approximately 9 metres to go under the tilt panel wall before flowing up to the height of the top of the first/entry tank. There is a 100mm overflow pipe on the first tank (and a secondary 100mm overflow on one of the other tanks). The Archimedes principle of joining the tanks and them all levelling works during light rainfall however during heavy rain (we have rain events occasionally exceeding 100mm/hour for 10-30 mins) the system cannot cope and the first tank overflows dramatically. We need an overflow system from the inlet/first tank that does not reduce the level of all tanks (which a 200mm pipe at the top of the first tank would). A diversion system attached to the inlet pipe, to divert flow once the first tank fills is expected to be the only practical solution. Questions: 1) What size overflow pipe is necessary given the above information, and 2) What type of diversion/cut off valve will work in this scenario, noting that a mechanical system would be preferred (i.e. not reliant on electrical power as the power may be out during a storm). If an electrically powered option is the best we would accept it, particularly if it had a battery support system.

Thu Jan 29 2026

about 2 hours ago

Open

I have a customer who spilt a bottle of Rice Wine Vinegar in cupboard that leaked through to the rangehood below. The result is that the rangehoodno longer fully functions as the switches (control board) was effected. The control board still lights up an LED and the fan turns on to a low setting when the unit is switched on at the PP. No other buttons work!

Thu Jan 29 2026

about 14 hours ago

Open

Thu Jan 29 2026

about 14 hours ago

Open

Need to have a downpipe installed at the front of house

Thu Jan 29 2026

about 18 hours ago

Open

Need to install shelves, mount television, fixed tile, etc

Hoppers Crossing, Victoria

Thu Jan 29 2026

about 21 hours ago

Open

I need someone to install and make changes to Existing signage

Thu Jan 29 2026

about 22 hours ago

Open

We are installing a very small dust extraction / ventilation system for a sanding bay in a light industrial workshop and are looking for a mechanical engineer to review the proposed setup and provide a brief fit-for-purpose sign-off letter. Scope is limited to review and sign-off only. This is not a large or complex system. Details: Manual sanding only No spray booth, no solvents Single-phase extraction unit Light industrial / small workshop use We can provide: Photos of the sanding bay Room dimensions Extractor model and specifications What we need: Review of the proposed system Confirmation it is appropriate for the intended use Short written sign-off letter (not a full report) No electrical design required. Fixed price preferred. Budget $400 fixed price (open to discussion depending on scope)

Thu Jan 29 2026

1 day ago

Open

Looking for someone to respray my 1981 Datsun 1200 ute and complete minor bodywork. The car is straight overall. Scope of work: - Rust repair on lower sills and quarter panels - Tap out minor dents and straighten rain channel - Full respray over existing paint (scuff and shoot, not bare metal). Open door job including jambs and door faces, not interior. Preference for 2K acrylic, not base/clear. - Raptor bed liner in tray – will need blasting or heavy sand and prime before application - Remove and weld over tonneau mounts, aerial hole, and mirror holes - Reposition and mount mirrors I'm after a clean driver-quality finish, not show standard. You must have your own workspace and spray setup. I can deliver the car to you and handle disassembly beforehand if it helps with quoting. Happy to supply materials if preferred – open to discussion. You're welcome to inspect the car in person before quoting or commencing work. Budget is dependent on skills and experience, scope, and inclusions/exclusions. You'll need to demonstrate previous work before the job commences. Payment on agreed milestones throughout the job. Low-effort replies without examples will be ignored.

Wed Jan 28 2026

1 day ago

Open

Fit 2 sets of new door handles which u have to source/find fix up doors ready for house inspection.

Point Cook VIC 3030, Australia

Tue Jan 27 2026

2 days ago

Open

Browse all tasks

Last updated on 30th Jan 2026

How to earn money on Airtasker

Job opportunities that find you

Set up notifications and be alerted when a nearby, well-matched job is posted. Let customers book you directly by setting up a listing. Provide a great service and work with them again with Contacts.

Set your price

Found a job you’re up for? Set your price and make an offer. You can adjust and discuss it later if you need to.

Work. Get paid. Quickly.

When tasks are complete, request for payment to be released and money will appear in your account instantly.

Post a task

Get Inspired: Top TV Installation & Setup Taskers in Westminster

meet
Yinka F
2 years on Airtasker
- Hyde Park Corner England
4.6
Overall rating
77 reviews
100%
Completion rate
The percentage of tasks successfully completed by the Tasker
83 tasks
meet
Julien mawangu M
7 years on Airtasker
- Westcliff-on-sea England
5
Overall rating
830 reviews
100%
Completion rate
The percentage of tasks successfully completed by the Tasker
990 tasks
meet
Mehmet a. C
8 years on Airtasker
- East London England
5
Overall rating
733 reviews
100%
Completion rate
The percentage of tasks successfully completed by the Tasker
858 tasks
meet
Onyeka O
5 years on Airtasker
- Brent England
4.8
Overall rating
528 reviews
100%
Completion rate
The percentage of tasks successfully completed by the Tasker
684 tasks
meet
Munir S
4 years on Airtasker
- East London England
5
Overall rating
604 reviews
99.85%
Completion rate
The percentage of tasks successfully completed by the Tasker
684 tasks
meet
Mark E
4 years on Airtasker
- Canary Wharf England
5
Overall rating
468 reviews
100%
Completion rate
The percentage of tasks successfully completed by the Tasker
579 tasks
meet
Selami H
4 years on Airtasker
- Eltham England
5
Overall rating
433 reviews
100%
Completion rate
The percentage of tasks successfully completed by the Tasker
486 tasks
meet
Joshua M
8 years on Airtasker
- Woking Borough England
5
Overall rating
406 reviews
100%
Completion rate
The percentage of tasks successfully completed by the Tasker
457 tasks