Install new modem and wi fi mesh to computer home

Lismore, New South Wales

Wed Apr 30 2025

about 19 hours ago

Open

I need to export videos from Capcut to my Mac. It says not enough storage. Please set up and organise my files so it goes to the cloud and not clog up disk space. Please give me a SOP (system of process) of where to store my files that will optimise space.

Summer Hill NSW, Australia

Tue Apr 29 2025

2 days ago

Open

Looking for an expert in LAN and Wifi, and modems to help connecting to large office printers to the network so that we can print off Mac. Currently they are showing as offline on the Mac.

Cremorne VIC 3121, Australia

Wed Apr 23 2025

8 days ago

Open

Fix laptop screen as it no longer turns on (damaged)

Mascot NSW, Australia

Wed Apr 23 2025

8 days ago

Open

Firewall Replacement and Meraki Installation in a Medical Centre 1. Locate the Network Room / Rack ○ Identify and access the main network room or equipment rack at the clinic. 2. Identify Devices to be Replaced ○ Locate the Fortinet Firewall and the 4G failover device – these will be removed and replaced. 3. Locate Ubiquiti Switches ○ Find all Ubiquiti (Unifi) switches and AP onsite. ○ Note down the MAC address of each Unifi switch and AP. 4. Pre-Installation Photos ○ Take clear photos of the following before making any changes: ■ Network rack/setup ■ Fortinet Firewall ■ 4G device ■ Unifi switches with visible MAC addresses 5. Contact Us Before Proceeding ○ Please call the number provided in your job email before starting the replacement. 6. Install the Cisco Meraki Firewall ○ Replace the Fortinet with the Cisco Meraki firewall. ○ WAN/Internet port on the Meraki should be connected as follows: ■ If FTTN, connect via the existing modem. ■ For all other NBN types (e.g., FTTP, HFC), connect directly to the NBN NTD using an Ethernet cable. 7. MAC Address for IP Reservations ○ Once you provide the MAC address of the Unifi switch, we’ll configure the IP reservations remotely from our end. 8. Post-Installation Confirmation ○ Once the new setup is confirmed to be working, take clear post-installation photos of the final setup. 9. Label and Return Decommissioned Equipment ○ Label the Fortinet and any other removed devices with the clinic name. ○ Pack and ship the devices to the address provided in your job email. 10. Troubleshooting Support ● If the service doesn’t come up or there are any issues, please stay onsite and call us for troubleshooting support. We’ll assist you step by step

Wodonga VIC 3690, Australia

Tue Apr 22 2025

8 days ago

Open

Firewall Replacement and Meraki Installation in a Medical Centre 1. Locate the Network Room / Rack ○ Identify and access the main network room or equipment rack at the clinic. 2. Identify Devices to be Replaced ○ Locate the Fortinet Firewall and the 4G failover device – these will be removed and replaced. 3. Locate Ubiquiti Switches ○ Find all Ubiquiti (Unifi) switches and AP onsite. ○ Note down the MAC address of each Unifi switch and AP. 4. Pre-Installation Photos ○ Take clear photos of the following before making any changes: ■ Network rack/setup ■ Fortinet Firewall ■ 4G device ■ Unifi switches with visible MAC addresses 5. Contact Us Before Proceeding ○ Please call the number provided in your job email before starting the replacement. 6. Install the Cisco Meraki Firewall ○ Replace the Fortinet with the Cisco Meraki firewall. ○ WAN/Internet port on the Meraki should be connected as follows: ■ If FTTN, connect via the existing modem. ■ For all other NBN types (e.g., FTTP, HFC), connect directly to the NBN NTD using an Ethernet cable. 7. MAC Address for IP Reservations ○ Once you provide the MAC address of the Unifi switch, we’ll configure the IP reservations remotely from our end. 8. Post-Installation Confirmation ○ Once the new setup is confirmed to be working, take clear post-installation photos of the final setup. 9. Label and Return Decommissioned Equipment ○ Label the Fortinet and any other removed devices with the clinic name. ○ Pack and ship the devices to the address provided in your job email. 10. Troubleshooting Support ● If the service doesn’t come up or there are any issues, please stay onsite and call us for troubleshooting support. We’ll assist you step by step

Seymour VIC 3660, Australia

Tue Apr 22 2025

8 days ago

Open

Firewall Replacement and Meraki Installation in a Medical Centre 1. Locate the Network Room / Rack ○ Identify and access the main network room or equipment rack at the clinic. 2. Identify Devices to be Replaced ○ Locate the Fortinet Firewall and the 4G failover device – these will be removed and replaced. 3. Locate Ubiquiti Switches ○ Find all Ubiquiti (Unifi) switches and AP onsite. ○ Note down the MAC address of each Unifi switch and AP. 4. Pre-Installation Photos ○ Take clear photos of the following before making any changes: ■ Network rack/setup ■ Fortinet Firewall ■ 4G device ■ Unifi switches with visible MAC addresses 5. Contact Us Before Proceeding ○ Please call the number provided in your job email before starting the replacement. 6. Install the Cisco Meraki Firewall ○ Replace the Fortinet with the Cisco Meraki firewall. ○ WAN/Internet port on the Meraki should be connected as follows: ■ If FTTN, connect via the existing modem. ■ For all other NBN types (e.g., FTTP, HFC), connect directly to the NBN NTD using an Ethernet cable. 7. MAC Address for IP Reservations ○ Once you provide the MAC address of the Unifi switch, we’ll configure the IP reservations remotely from our end. 8. Post-Installation Confirmation ○ Once the new setup is confirmed to be working, take clear post-installation photos of the final setup. 9. Label and Return Decommissioned Equipment ○ Label the Fortinet and any other removed devices with the clinic name. ○ Pack and ship the devices to the address provided in your job email. 10. Troubleshooting Support ● If the service doesn’t come up or there are any issues, please stay onsite and call us for troubleshooting support. We’ll assist you step by step

Echuca VIC 3564, Australia

Tue Apr 22 2025

8 days ago

Open

I want to link an Apollo X2 DAW with a 18i20 and SSL Fusion have it all patched and working through console with labelled adat settings to work seamlessly with my Mac M1

Dulwich Hill NSW, Australia

Tue Apr 22 2025

9 days ago

Open

I have a 2021 MacBook Pro 14inch with a broken screen. Apple have said it’s just the screen that needs replacing and isn’t a software issue. I need someone to have a spare screen that they can replace on my MacBook. It doesn’t need to be a guide Apple screen.

Edgecliff NSW 2027, Australia

Tue Apr 22 2025

9 days ago

Open

Apple Mac Repairs Jobs near you

Browse through over 500 Apple Mac Repairs Jobs.

See what you could earn

£0

Apple Mac Repairs tasks

Install new modem router to MAC com then ax3000 wi fi mesh

Clear up storage on my Mac. Create better storage archive system

Connect to office printers to LAN and Mac

Fix apple Mac screen

IT Technician to replace firewall - Wodonga

IT Technician to replace firewall - Seymour

IT Technician to replace firewall

Link Apollo X2 with Scarlett 18i20 and SSL Fusion and patching to work

Mac Book screen replacement