Find a local circuit board repairer in London

Repair nissan ariya speedometer cluster I have a nissan ariya and it has a speedometer same as the one on picture Right side screen is completely black, while investigating the root cause i understood that everything is fine with the unit but its just the BACKLIGHT of the lcd which is off, you could see numbers are changing under the sunlight I went further and i bought a salvage unit And by replacing the circuit board with similar cluster, i found out that the issue is not from lcd but from curcuit board Unit came back to life and it was working as normal Unfortunately the salvage that i bought is from another car with lower trim level, so some of the options and equipments of the car are not supported by that Now i ned an electronics engineer to have a look at original cluster board to investigate the root cause I CAN BRING THE UNIT TO YOUR DOORSTEP

I need an Electronics engineer to repair the PCB board that is encased in the Monitor/Computer for my Racquet String machine from the 90's as the battery was leaking for several years and corroded the ICs / Trace lines so that the display no longer functions.Also a Molex female plug needs to be fitted which needs to be fitted to one end of a cable which connects the PCB board to the CRT power unit.I need someone who can spend time investigating the problem.Someone who can spend time looking at which ICs have been damaged and there are Trace lines that need replacing or re routing/bypassing certain components?Also a Cell Battery replacement is needed.The Electronic expert needs to spend time investigating thoroughly the problems.

Ac circuit board need fixing

I have a gemmy animatronic butler. The circuit board is not working. I need it ch cl and repaired.

I need a new separate circuit on my switch board so I can plug in my slush machine : currently the circuit it’s on trips the rcd. So it needs its own circuit

PSU for LG, EAY65689422. fuse is in open state

Desolder two multi pin connectors on a board and put them on ribbon cable extensions

I'm getting an error message on a treadmill which stems from a fault with a small pcb, reed switch and ribbon cable

Circuit board of door bell

I have a casio AE1200 and AE1300 watch that i want both LED’s desoldered and replaced with new ones.

IO have a circuit board that needs repairing - Due date: Flexible

A racquet stringing machine CRT monitor with a circuit board or mother board needs repairing.

Have a transformer which requires to be connected to my electric board

We have been having issues with our tumble dryer. We had someone remove the circuit board and it had some damage. We have had this repaired and now just need the board putting back in. Picture of circuit board attached. Hopefully a very quick job for someone who knows what they are doing! The dryer is a Bosch WTA 74200GB.

Manufacturers have told me the circuit board has failed

The machine is just out of guarantee. The supplier has told me the circuit board has failed

Fix ecu as got wet it is a steering rack module

Locomotive train set stopped making sounds

Stopped working..think circuit needs replacing

Looking for someone experienced in electronics repairs to replace some step switches on a 808 style midi sequencer 4 swiche are not working, i have opened it up to have a look & the swiches are soldered into a PCB which is a bit over my head but i guess someone with exprerience should be fine, it is a valuable instrument so i do want someone who is confident they can replace a set of PB-86 step switches which i can supply