Find a professional verandah installer in Gold Coast

Spilt paint and need a small gurney clean

Our verandah roof had to be removed to allow a new window and now needs to be put back. Some timber beams need to be added back into the frame, and the roof sheeting needs to be attached back on and secured. I have the materials for the roof sheeting as well as the bolts. You may need to provide timber beams to secure it down. - Due date: Flexible

External eaves replacement on small verandah. Requires 4 sheets 2400mm long x 655 wide x 5mm thick (installed crossways) plus one sheet 1110mm long x 655mm wide. Plus new plastic strips for all edges. - Due date: Flexible

Spilt 500mils of undercoat on a verandah - Due date: Flexible

Our verandah roof had to be removed to allow a new window and now needs to be put back. Some timber beams need to be added back into the frame, and the roof sheeting needs to be attached back on and secured. I have the materials for the roof sheeting as well as the bolts. You may need to provide timber beams to secure it down. - Due date: Flexible

Water daa to 3 beams on verandah - Due date: Flexible

The ceiling above my veranda has black mould on it. It’s approx 3m x 4m area I have tried to clean it myself but it is still fairly visible on the small area I did. It is a painted Gyprock ceiling - Due date: Flexible

Sanding down so they can be painted - Due date: Flexible

Clean ceiling outside verandah - Due date: Needs to be done on Thursday, 16 June 2022

Needing pieces of timber on verandah replaced 2 lengths of 770 long and 90 wide 20ml and 1 length of 1 m long and 190 wide on side of the varandah. - Due date: Flexible

Stopped working the fan light has remote have tried all obviousoptions - Due date: Flexible

Our undercover area needs a facelift and we are thinking a repaint. I will attach photos of the area. The area is 10m by 4m

Supply and replace 2 rotted timber posts 17cm diameter x 2.4 high. - Due date: Before Monday, 31st Jan 2022

we would like to enclose our verandah to make a small study. We are looking for someone to remove the current mesh screening : replace with a sliding or stacking door and window in the area to make it weather tight Area = approx 3.3x 1.8 x2.4h We also have glass sliding door in this area which we would like replaced with a wall and an internal sliding door. Location surfers paradise, asap however date flexible

Have a verandah that i want to glass in on 2 sides One side approx 1960w x 2200h The other approx 3500 x 22ooh

I have a front verandah that needs screening for privacy. Lattice or similar. Job based in Southport.

Need a quote for materials and labour for upstairs verandah repair (replace rotting posts etc) and also install non-slip surfacing onto existing stairs. See attached outline of works and photos. After a free quote for materials and labor prior to commencement of repairs

I have a verandah which has some rotten wooden planks and would like to get the whole verandah replaced, not just the rotted planks. It’s strata so has to stay the same in terms of size and the railing etc. The wood you would need to purchase as well as your time to build.

Replace and paint a rotten verandah beam from wet weather.

1. Need a builder to convert the slanting tiles roof over the garage into a wet area verandah with a metal grill all around the verandah which will need to resurface the roof top from slant to flat and make it wet proof and align roof water drainage to then collect the verandah water too and then connect it to drains in the ground The verandah is to enjoy the natural reserve scenery at level 1of the high set house 2. This needs to change the current sliding 220 cm window into a sliding door of the upstairs room in order to access this verandah from this room facing the natural reserve 3. To restructure a pillar supporting the front small extension of the upper bedroom meaning to cut the pillar from few sides so as to convert it from say 2.5m square pillar to a1.25 m square provides it does not disturb AT ALL the balance of the house as I am not sure if it is the support pillar or just a decorative pillar The whole aim is to enlarge the house front entrance by deceasing the existing pillar to half the circumference Pillar has bricks and rendered So same needs to be redone A previsit will be needed and a plan to be submitted to council for building changes approval I believe it is a support pillar but these pillars have about a long metal in centre and bricked in all sides with rendering Hence the main support is that long metal rod extending from upper bed room from extension to the ground But the thickness of the pillar may not matter the support whether it is 2.5 m square pillar or 1.25 m square pillar as I have been watching other houses being built around me with 1.25m pillars as good supports too Price is negotiable based on visit and what can be done ultimately considering house integrity and support pillar .