Find a drywall repair professional in NSW

Need drywall repaired and re-painted to match existing Quotes welcomed

There is a hole in the drywall that goes through so you can touch the sliding door inserted in that wall where the doorstop used to be. I would like the hole repaired so that the doorstop can be attached. The sliding door cannot be removed here. I have attempted to do a temporary patch on it (not a great job - was just for cosmetic purposes) but the hole is about 5cm by 5cm without the temp patch. The initial photos show just the screw holes, but the hole is essentially a circle where the doorstop base would have covered. Photos show the screw holes in the wall initially(it is now 5cm diameter hole), the temp patch and the sliding door in the wall where the hole is.

Need a licensed electrician to set up power for a wall-mounted digital display (Cozyla 24” calendar, 12V DC / 3A / 36W) where an old HiLook intercom is being removed. Current situation: the intercom ran on a 12V DC supply with a spare Cat cable in the wall. That supply is only rated ~0.8A, so it’s too small for the new screen. Two possible approaches — happy for you to advise which is best on site: 1. Install a concealed power point (GPO) or fused spur in the wall cavity behind the screen so I can plug in the display’s own 12V adapter, or 2. If practical, trace and upgrade the existing 12V supply to a properly rated one. Either way, the wiring needs to be tidy and the outlet/adapter concealed behind the display. There’s an existing wall recess and cabling to work with.

I need someone to install a deadlock on the door to the garage and repair holes in the drywall

I need an experienced handyman or plasterer to repair a chipped external corner on a drywall/plasterboard wall. ​Details: ​The Damage: A section of the wall corner has chipped away, exposing the metal/plastic corner bead underneath (see attached photo). The damaged area is relatively small (approx. a few centimeters long). ​Scope of Work: * Patch and fill the damaged corner using appropriate joint compound/filler. ​Sand it down to a smooth, flush finish that matches the existing wall line. ​Apply a coat of primer and paint over the repaired section. ​Materials: I can provide the matching paint color if needed, but please bring your own tools, compound/filler, and painting supplies (brushes/rollers). ​Please leave an offer with your availability and estimated time to complete the job. Thank you

Drywall wall crack close to internal door to garage acess, on both sides of the door. There are 3 cracks and the angle needs squaring as it's just been filled and become rounded. See the pictures with the Yellow text. The job involves no Painting, No cornace replacement. I just don't want any cracks & nice angled Wall corners (not round corners) . The pictures are looking at is the same door, its just the other side. can remove the door frame if required. I am not looking for someone to add filler, I'd prefer new drywall to make the edges squarer & re-inforce so it doesn't crack. If you want to look first that's ok. You can view and quote me. Stanhope Gardens NSW 2768

Cracks in the gyprock and a hole

We need some help plastering / painting these dents in our dry wall, total of 4

I’m looking for an experienced handyman or electrician to install a ducted rangehood. The rangehood comes with the mounting bracket and only needs to be fixed into place with two screws. The main work required is: * Replace or repair the drywall behind the rangehood * Install the rangehood onto the supplied bracket * Run the ducting through the ceiling * Vent it either through the eaves or the roof Looking for someone who has experience with rangehood ducting and can complete the job properly for a reasonable price. Please send through your quote and availability.

Finish final touches in sanding the top floor of a home. Walls have been sanded but it need a bit of perfection .

I want someone to repair my drywall it’s a big hole but I need someone professional

Adhesive ripped off some paint and drywall, have done one attempt to fill it. Needs to match the current wall as closely as possible. The area is about 3in * 1.5in (see pics).

We have 2 blinds that are broken. One of them is very stiff. It's very difficult to pull the blind up. The other one appears to have come off its tracks. We also have a few small holes in the drywall that need patching up.

We have a new 65 inch TV. Have also purchased a full motion TV wall mount MD2617-24K-04 which is compatible. After someone to install the wall mount and mount the TV onto drywall

I have two drywall patches that need patchwork and paint afterwords. Both patches are 3-4cm in radius.

Looking for an experienced TV installer to wall mount my 55” LG OLED TV in my apartment. TV model: LG OLED55B5PSA Important details: TV is to be mounted in a wall nook that is approx. 158cm wide I would like the TV centred in the nook Preferred height is around 95–100cm from floor to bottom of TV I’d prefer a slim tilting mount I do not need cables concealed in the wall Important note: The wall sounds hollow when knocked on, so I think it may be plasterboard/drywall rather than concrete. I have permission from my real estate agent to mount the TV, but I want it done properly and safely. I have not bought the mount yet because I want advice on the correct bracket/fixings for this wall type. Please quote only if you have experience mounting TVs on plasterboard/drywall walls and can either: advise exactly what mount I should buy, or supply the correct mount/fixings as part of the job I’ll attach photos of the wall/nook and surrounding area.

Looking for an experienced handyman to install a baby gate securely into drywall, bottom of staircase. The gate needs to be properly mounted into the wall (not pressure-fit), so experience with plasterboard fixings is important. It must be strong and safe for a toddler. - Install 1 baby gate (pictured) - Fix into drywall on both sides - Ensure it is level, secure, and child-safe - Use appropriate anchors (e.g. wall mates / toggle bolts / into studs if available) - Clean, neat finish

3 small drywall patches where paint and paper face have been pulled off, exposing gypsum core. Torn paper edges need trimming, filling, and the wall has a fine stipple texture that needs to be matched before repainting. Rental inspection on Friday the 24th of April - need it done ASAP.

Budget: $100 - $450 (Open to quotes) Description: Hi, I need a handyman Pet er to repair a roller blind that was pulled out of the ceiling. Maybe by a cat. The Issue: The cat pulled the blind, causing the bracket screws to rip through the drywall. The original mounting holes are now quite large and crumbled, so they will need heavy-duty anchors (like SnapToggles or Toggle Bolts) to be reinstalled securely. Task includes: Removing the remaining blind/bracket from the ceiling. Patching/filling the damaged drywall area. Re-mounting the bracket using heavy-duty anchors that can handle downward weight. Popping the roller blind back into place. Requirements: Please bring your own ladder and heavy-duty drywall anchors (SnapToggles preferred). I have photos of the damage attached. Located in Rosebery. Looking to get this fixed / This Week. Happy to accept low offer will top up with csah or paayID if needed. You are allowed to offer $10

I have removed a set of floating cupboards and the paintwork, and parts of the drywall have peeled away. I would like these sections cleaned up and replastered along with the screw holes filled. No painting required but the area needs to be ready for paint. The total area is approx 2 sqm, but the whole section doesn’t need to be replastered.