Find a cladding professional near you

Stone clad the front of shed, above and to the left and right of roller door

I am installing a roof and removing an existing roof. Looking for somebody to replace missing / broken cladding on the house.

Need external fence screen cladding installed (219 x 26mm monument/Carbon Batten Screen Panels) - as per Ekodeck product supplied by Bunnings Need installed in two alfrescos to replace existing bamboo screening (inside steel posts) - as per pictures. Alfresco 1 - span is approx 5.4m in total - each section inside 4x posts ranges from approx 1640mm to 1950mm (height looking for 2000mm) Alfresco 2 - span is approx 7.0m in total - each section inside posts is approx 1650mm (height looking for 2000mm) Seeking professional installation of panels and will also need strong metal backing plates for each of the sections supplied and installed More than welcome to come and measure in person or advise if further clarification is required - cheers

Need to paint two coats on the top floor of the cladding either on Sat 13th Sep or Sun 14th Sep. Paint will be provided.

Line an existing wall with feature timber cladding 3.6 high x 4 metres

Looking for someone to apply cladding to the wall In total of 7.5 sheet each 600mm And 3 tv cabinet to be hung in the wall as mentioned on the picture which shows where the pannels need to be installed and the tv cabinet as well Thanx you

Weatherboard front and back of house

Looking for an experienced handyman or carpenter to install Castellated cladding on an outdoor wooden fence. Details: Fence dimensions: 7.5 metres wide x 3 metres high All cladding materials will be provided Need to install timber lengths flush with the fence posts for a clean, finished look Looking for a professional, neat job with good attention to detail What you need to provide: Labour only Tools required for the installation (e.g. saw, level, drill, etc.) Fasteners if needed (please specify in your quote if additional consumables are required) https://www.bowens.com.au/p/permatimber-cx-castellated-cladding-spotted-gum/

I am looking for someone who can come and install the cladding for me on tv wall in the living area and entrance wall of the home. I have already purchased the cladding. There is a door on living area wall and will required to be covered with cladding but still should be able to use the door. Tv wall - 2.4 x 5.2

Fix back 1- Corner panel of house cladding. Single storey house. I have the panel that has come off due to strong winds.

I have a pre-existing 15m fence (see pictures). I want to leave the neighbours wood panels up. I want to clad my side with the Bunnings product linked below. Price to include installing rails onto the existing steel poles (including materials) but does not including the cladding material itself. There is also an old 1m mesh fence in about 7.5m which the price includes to remove and dispose of. Cladding material link which I will buy: https://www.bunnings.com.au/ekodeck-219-x-26mm-3-6m-carbon-batten-screen-castellated-panel_p0488949?store=6042&gclsrc=aw.ds&gad_source=1&gad_campaignid=11071326627&gbraid=0AAAAADtbEB8T1U-xi8rZOPHRsjWCSDtFb&gclid=CjwKCAjwravBBhBjEiwAIr30VF7rg5Rb4udBC6KbFguN3_nL-GRyUefwbmUM-t93CpVhGzm7mxbuYxoCBqMQAvD_BwE

Materials supplied. Looking for installation only. Ongoing job, and for the right person. Job is in East Cannington. Straight forward job. All fixings supplied. Ground floor and top floor. Good access. Easy height accessible by a three step ladder.

FENCE - FEATURE (DRIFTWOOD FENCE CLADDING FROM ENDURADECK). EXISTING FRAMING AND POSTS TO BE USED. Dimensions = 10.04m (length) x 1.80m (height), Price = 10.04m x $245.00 (price per meter). Driftwood cladding provided as well as the screws. Driftwood cladding length needs to be cut to size.

Need some 3mm flexible sheeting to be cut to size from 2400mm x 1200mm sheets to go onto 3 x walls using Sika 11FC glue and 6mm provided L trim in between joins. Height is 2200mm with widths 1500mm,1400mm,2300mm,375mm. 1 x wall has some cut outs for light switch and monitor,AC button. City apartments with parking and cutting onsite downstairs or in apartment. Need experienced people please.

Corner L piece to wall cladding came off after windy day, needs reinstalling by screwfixing and silicone sealing edges so its watertight. Screws need repainting to match wall. One corner only, is located on Level 1 so need to have ladder to be on roof. Corner then accessible via roof.

Move the panels in the pictures and 10 roofing sheets to the backyard. There would be about 30 steps over 50 meters each way. The concrete panels are large but relatively light. 40kg each. 2 people would be required due to size.

Need cladding done around garage external wall ( James Hardie linear board cladding ) at two sites Wynnum and cannon hill

Hi I have a job in Heidelburg that need someone to help me puting 2 small posts down and make a frame. 4 hours job from 8 to 12. 35 an hour. Not too much physical work. I do the work and just need a helper.

I need 6 sheets cut and installed in a Brisbane city apartment with the sheets here ready to go. A few Minnor cutouts and mitering and simple straight cuts . easy access, cutting onsite, glue up and done.

Need cladding installed in the missing section behind the TV. I will provide the cladding to match. Around 1-1.5metre