Find a cladding professional in West Melbourne

Looking for someone who can carry out the following repairs. This is located on a 1st story roof. Assess and properly waterproof the right‑hand vertical flashing/wall junction. Inspect and rectify the front-facing foam cladding/render and apron flashing junction. Review and repair deteriorated or cracked render/cladding sections contributing to moisture ingress. Evaluate the horizontal apron flashing installation and extend or reconfigure it where required to ensure adequate weather protection.

Install 220 panels of Large Pu Stone , each measuring approximately 600 × 2900 × 50 mm weight roughly 2 kg each panel , installed vertically onto internal walls within the showroom premises. Works Included Installation of approximately 220 Large pu Stone panels. Panel size: 600mm width × 2900mm length × 50 mm thick 2kg each panel check clads.com.au for product details. Vertical installation to an approximately 4.8 m high wall. Total coverage area: approximately 380 m². Installation to include all necessary fixing, alignment, levelling and finishing required to achieve a neat and professional appearance. Provision of suitable access equipment for working at approximately 4.8 m height. Paint the panel to colour choosen. Final touch-ups and finishing to provide a consistent black appearance throughout. Clean-up of the work area upon completion.

Looking for someone experienced to supply and install cladding to one feature wall in my living area. The wall is approximately 6.5 metres in length and is currently painted Dulux Monument grey. I’m wanting cladding in a similar dark grey/charcoal colour so it keeps the same overall look as the wall currently has. Open to recommendations on the best cladding style/material that would suit the space. Please include in your quote: * Supply of cladding * Installation * Any required trims/finishing * Any other materials needed to complete the job Please send through your quotes and availability.

I’ll be supplying all the material’s, the boards we are using are James Hardie FC boards 8.5mm easy lap. The job is to finish it off for me, I’ve done the outside and not fining time to do the inside. $350 cash The job site is to be left clean All caulking done Board primed. I’ll do the top coat

Wanting to have my garden bed/sleepers cladded. The width is 10.5m, the height varies from 400mm-600mm. I will supply the cladding and the fascia board, you will need to supply the timber for the frame that the cladding will be fixed to. The sleepers aren’t completely plumb or level so will need to be packed out Top fascia board will need to be checked out around the post.

Install external cladding on top of existing Fence on the sides. Approx 20-25 mts length

Need a wall cabinet with wall cladding for my prayer room and TV along with walkway

We will have the panels but we need someone to just come and install them on to our plaster walls. We have 2 walls. 1x wall is 5230x2270 1x wall is 4250x2270 We looking for a reasonable price as we have a lot of things we are doing right now however if it’s too much we won’t bother.

Need to install WPC batten cladding to the front porch fascia. You need to supply the material. Please give the quote for material cost.

Need help to put up cladding on the wall

2.8 m long 20cm wide pvc cladding x 15 pieces from Laverton to Bulleen

Organise a quote for the cladding on the garden bed

Installation of cladding Mount TV on cladding install floating shelves

I’m after someone experienced in installing decorative wall mouldings and half-wall cladding similar to the attached photo. Looking for a clean, high-end finish with attention to detail.

I’m after someone experienced in installing decorative wall mouldings and half-wall cladding similar to the attached photo. Looking for a clean, high-end finish with attention to detail. Fully finished with painting too

Need installer to install acoustic wall panels for 5 meter wall.

Scope of Work: The external panel is butting right up against the hole of mixer so it either has to cut in a slot or whole cabinet size has to be cut then we have pack it with timber and install vj panelling as marked in photo Modify kitchen island panel to allow installation of a kitchen mixer tap (cutting/drilling and reinforcement as required) Ensure opening is correctly positioned and structurally supported for plumbing connection Install and finish cladding on the modified section of the island Ensure clean, professional finish suitable for visible kitchen area Requirements: Experience with kitchen cabinetry or similar joinery work Attention to detail for visible finish work Ability to measure accurately before cutting Own tools required

Material & fence photo in photos. Material & Glue will be provided to stick cladding on board.

Get rid of mildew and fix hairline crack on a Hebel cladding above garage door.

Need to install indoor cladding x 2 walls — Wall sizes - [ ] Wall 1 ( H 2700 x L 2400 ) - cladding already cut to size with 4 panel - [ ] Wall 2 (H 2400 x L 900) - this cladding size is H 2700 need to cut to size