Find a professional tiler in NSW

We are looking for a tiler that is familiar in laying rock pattern floor tiles. All material on site, area of approximately 100m2 open area ready to start.

Recently had a new front door installed and am needing an experienced tiler to complete the tiling on the step. Assuming this will be a tile over tile job. Supply and install of tile required. Any size tile is fine Exterior black tiles required.

Paint whole house 109 SQM, double coat, dulux, vivid white, kitchen cabinet and need to replace proceliene tiled whole area ( Currently hybrid wooden floor)

Kitchen Floor Tiling – 13m² Looking for an experienced tiler for a 13m² kitchen floor. Details: * Concrete substrate * New tiles are already supplied by me * Main tile: 200 × 200 × 10mm * Border tile: 53 × 300 × 10mm * Existing surrounding tiles: 380 × 380 × 10mm, laid in a 45° diamond pattern * New tiles to be laid in a 45° diamond pattern, with a double-row border * New finished floor must be flush with the existing surrounding tiles Please provide 2 separate quotes: 1. Tile removal & floor preparation * Approximately 6m² of existing tiles still need to be removed *At the kitchen boundary, approximately 6 existing tiles need to be carefully cut in place to form the new tile boundary * Remove/grind existing tile adhesive from the concrete * Grind down high spots and prepare a flat, sound substrate suitable for tiling * Please advise separately if any levelling/patching is required 2. New tile installation * Install approximately 13m² * 200×200mm tiles in 45° diamond pattern * Double-row 53×300mm border * Carefully set out the layout before tiling * Neat cuts and transitions, especially where the new tiles meet the existing 380×380mm tiles * Ensure finished floor level is flush with the existing floor.

We’ve removed a timber bi fold door , we want to tile the existing gab from the bottom track. I have tiles enough to use to create the step down. Also need a angle strip across the edge

Raise Outdoor Floor by Approx. 100mm & Install Hybrid Flooring – 18m² I’m looking for an experienced and reliable builder/carpenter/flooring tradesperson to convert my existing outdoor seating area into an extension of my living room. Area: Approximately 4.25m × 4.25m (18.1m²) The existing floor is concrete, but I do not necessarily want to add another concrete layer. I’m interested in a suitable raised timber/steel framing system or other appropriate method to raise the finished floor by approximately 100mm. Scope of work: * Inspect the existing concrete floor and advise on the best method to raise the floor approximately 100mm. * Supply and install suitable framing/support structure. * Install appropriate flooring substrate over the frame. * Install hybrid flooring across the approximately 18.1m² area. * Ensure the finished floor level matches the existing living-room floor as closely as possible. * Install appropriate trims and finish neatly around walls, doors and the transition into the living room. * Consider moisture, ventilation, drainage and waterproofing requirements because the area is currently outdoors. * Ensure the finished floor is solid, level and suitable for normal living-room use. I’m open to recommendations on the best framing system and materials. Please quote for the complete job, including labour and materials, and explain the proposed construction method. I can provide photos and measurements of the existing area and the adjoining living-room floor. Please include examples of similar raised-floor or outdoor-to-indoor conversion work you have completed.

Waterproofing, screeding and tiling of small bathroom. About 8m2. Floor tiles 300mm x 600mm. 2 x drains. Room fully stripped.

Hi, looking for resturant floor tiling around 22 sqm

Replacement of existing floor tiles with 600 x 300 tiles in 2 areas. Approximately 1.8 sqm at double white doors. Approximately 1.9 sqm at hallway with 3 doors.

I need tiling done under the pergola area, with some edges lifted on the wall around the area. Tiles and material supplied.

Tile front porch & back door steps. Must have tiling experience. I will supply all tiles only. Please supply glue required. Front approx 1.3x1.3 plus 4 steps. Rear 3 steps not very big.

I wanna tile Livingroom, corridoor, and two bedrooms (total 64sqm including 10% extra) and 2 bathrooms floor (total 11sqm including 10% extra. The tile will be on me. Their size for the livingroom and bedrooms and corridor is 60*60. And for bathrooms is 30*60 For the bathroom the tiles to be glued over the existing tiles. so, no need to tough the pipe or underneath things. The current floor for livingroom and corridors is timber and for the rooms is carpet . I will remove them. Just 8sqm tile is in the living room to be removed either you remove them or I will organise someone to remove. Note this is a unit apartment and I need to get the Starat’s approval. They have asked for defining the scope of work and the license for doing the job. Many units are doing this job so it is quite straightforward process for strata approval. Please first come to give me an accurate quote.

small area of floor tiling in laundry (approx 700 x 700mm): infill area after plumbing repair

We recently got some work done , some posts were removed so some about 12 floor tiles hae chipped off. We do have the floor tiles want someone to remove the broken ones and put the new ones on

Seeking an experienced tiler to install floor tiles in a room measuring 22.3 square metres. (5.7mx3.9m) Tiles are already supplied. (They are 600mmX300mm) The floor is prepared for tiling. No waterproofing required. Send me your offer please Located in Bexley

Hey! I would like to get my floor tiles of my shower replaced. Most probably also waterproofing will be needed upon removing old tiles.

Replace small sections of tiles (we have spares) and clean / regrout the whole floor.

Kitchen floor tiles have shifted and cracked at my investment property. Need to replace all visible tiles with plain white square tiles (no need for diamond design). Tiles measure 30cm by 30cm and are 1.5cm thick. At least 50 new tiles required judging by my pictures. Will need to contact my managing real estate agent for property access. Thank you

Laundry floor tiling and water proofing to be completed. Floor and skirting tile 600 x 600 tile

I need around 70sqm floor tiling done . Labour only . Materials provided

I need a tiler to neatly remove broken tile and lay new 1200x1200 porcelain tile. New tile can be in two pieces and not necessary to cut square for service s

We want to tile our backyard with porcelain tiles. Area: 48 sqm. It currently has brick pavers. These will be removed and the area will be concreted with broom finish. I am looking for just tiling quotes. This will include installing tiles and supplying glue, grout, levtec, and silicon. We will supply porcelain tiles ourselves.

Replace a broken tile in alfresco and cut small piece and replace missing corner - spare tiles supplied

endura shed has to be installed on porcelain tiles. I will be with the installer as I will be assembling the storage shelves inside the endura. I a, expecting the assembler to screw the shed to the porcelains.

We need a qualified tiler to pave 112 metres. Price to cover labour and associated costs of adhesive, grout and prep (300x300mm porcelain tiles will be provided) to pave directly over existing terracotta tiles of flat ground level access, 2x long pathways and 2x courtyards.

We need someone to install around 44sqm of porcelain tile flooring. You’ll also need to coordinate with our other installer which will be responsible for the engineered timber section of the apartment, and both floors MUST be of the EXACT same level/height. Porcelain tiles will be installed from the end of the corridor to the living, kitchen, and study area. See floorplan attached. We’d also like a separate quote to remove all the carpet and existing flooring (kitchen and entrance, see photos attached.

Fix chipped porcelain sink

Looking for an experienced tiler to screed and tile my outdoor courtyard (approx. 12m²). The existing interlocking timber deck tiles will be removed before work commences (or happy for you to quote separately for removal). I have already purchased the 300 × 300 Travertine White rectified porcelain tiles. The existing concrete slab is uneven and not smooth, so it will need to be professionally screeded and levelled before the tiles are laid. The area is an irregular shape with one angled edge (see photos) and is a covered outdoor courtyard. Scope of work Inspect existing concrete slab. Screed and level the slab. Ensure correct falls are maintained for drainage. Supply all required materials including primer (if required), screed, outdoor tile adhesive, grout and silicone. Lay approximately 12m² of supplied porcelain tiles. Complete neat cuts around the doorway and edges. Grout, silicone and leave the area clean on completion. Please include: Your total quote (including screeding and tiling). Availability. Photos of similar outdoor tiling work. Any recommendations after reviewing the photos.

I have 2 shack wooden beside tables that we want to put stone tops on to “renovate” them. I have specifications for the task and will provide the porcelain

Looking for an experienced tile specialist to deep clean and seal grout across my living room, kitchen, and hallway floor. Tile & Floor Details: White marble-patterned porcelain tiles with a matte (non-shiny) finish. Very narrow/tight grout joints that have darkened with dirt. Scope of Work: Deep clean and scrub all grout lines back to their original light color using proper cleaning agents and narrow brushes. Allow grout to dry fully. Apply a water-based, penetrating (impregnating) sealer with zero sheen / natural finish (e.g., Aqua Mix or equivalent). CRITICAL REQUIREMENT: NO topical coatings, gloss, or wet-look sealers. Because the tiles are matte, I do not want shiny lines or film residue left on the grout or tile face. All excess sealer must be wiped clean off tiles immediately during application. Please answer when bidding: What equipment/products do you use for deep cleaning narrow grout? What specific brand of natural-look penetrating sealer will you use? Are you open to doing a 1-foot test patch first to confirm a 100% matte result?

Small crack in porcelain sink.. only need a cosmetic cover up not a fix. Is this possible? Don’t care about longevity. I have painted over it in white nail polish & can remove at anytime.

There are four spaces ( 1 bedroom - 3.45m x 2.8m, kitchen - 3m x 5m, dining - 3.25m x 3.75m, and open living - 5.5m x 7.5m) and a hallway ( 1.6m x 10m) that require Regrouting the porcelain tiles. Each tile measures 1200x600. I need a quote. Must supply own materials. No need to remove old grout from tiles, just need all tiles cleanly regrouted, especially where it is patchy and holes have appeared. Some areas need a bit of a clean first to remove dirt (see close up pic in open living).

Tilling around pool. Total area is 21m2. Coping already done. Concrete was poured on monday.

I'm looking for an experienced landscaper or tiler to renovate my backyard. The job includes: Inspect the existing paving and advise whether it can be tiled over or needs removal. Supply and install large-format outdoor porcelain tiles (approximately 600 × 600 mm or similar, travertine-look/light beige). Ensure the finished area has proper drainage and falls away from the house. Include all adhesives, grout, edge trims and finishing. Remove and dispose of any waste if required. The paved area is approximately 35 m². Please provide: Photos of similar jobs you have completed. Your experience with outdoor porcelain paving. Whether your quote includes materials, labour and waste removal. An estimated timeframe to complete the work. I have included two photos of current state and one photo of what I want that to be look like.

6 months ago we put sealant on porcelain tiles. We tried to remove it with different products but i don t think we got the right combo:) happy to help removing it

I have a crack on the surface of my porcelain sink. I need to filled, sealed and polished. $10 is not my budget, please make offer.

Location is in Wentworth Point (cant seem to edit in the app) The toilet seat has been successfully removed from the bowl The screws are corroded and will not screw out. I need someone to carefully drill out the nails and avoid breaking the toilet bowl as it is made out of porcelain.

I have a small chip in a white bathroom vanity basin/surface that I attempted to repair using a porcelain repair kit. Unfortunately too much filler was applied and the repair area is now more noticeable than the original chip. I’m looking for someone experienced with porcelain/ceramic/bathroom vanity repairs (bath resurfacing, enamel touch-up, chip repair etc.) to properly smooth, blend and refinish the area so it looks neat and discreet. The original damage was very small, and I’d prefer someone who has done similar vanity/basin repairs before rather than general handyman work. Please let me know your experience with porcelain or enamel repairs and what approach you’d take.

Need someone to cut porcelain tile for me

Hang porcelain wall art, a clock and some pictures in double brick wall. Total of 8 drilled holes required for 6 items - 2 big ones need 2 holes each .

Kitchen splashback = 2.5 sqm. Subway tile style (tiles will be provided) Laundry Splashback = 1sqm. Subway tile style (slightly different colour to kitchen - tiles will be provided. Looking for advice on regular grout or epoxy grout.

In the area between new kitchen cabinets & granite benchtop apply tiles, grout and silicon to benchtop. All tiles supplied on-site are 100x100 off-white gloss spanish, irregular edge porcelain. Existing tiles in terrace are subway whites. Bring all cutting and trade tools.

Need a splashback of 2 small kitchenettes siliconed. Large gap needs neatly filled with a Grey Silicone. Will upload photos shortly Approx 3 lineal metres in total of 10mm gap to be silicone filled.

Hi there, need to tile the splash back (rear, left and right) of a small kitchenette. The total area is approx 1.6sqm. - rear splash back is 1475mm x 605mm - left and right splash back areas are 600x605mm You will be applying to plasterboard (some VERY minor sanding may be needed in two spots where patch work was done). The tiles are 58mm x 242mm from Beaumont, and need to be installed vertically. You’ll need to supply all tools required to complete the job, including grout (I have and will supply the tiles). Note that two power points will be installed by the time you tile on the right splashback area. Job is in Glebe area (2037). I can provide you with a parking space in my garage and the kitchenette is up one flight of stairs from the garage. Ideally would like to do this on Saturday or Sunday (17/18th October) and am flexible on time.

Install two new benchtops. Left one is 2.8m (two pieces need to be cut and joined), right is 4.2m (Three pieces cut and joined). Attach benchtop to cabinets. Two cutouts required, one for stove one for sink. Seal cut faces. Cut and install laminate splashback approx 1.2m wide.

quote on per s m I want someone to tile over our current tiles. Back feature only on kitchen and small buttler. not the return sections. We can leave current tile on the returns. I need to it be neat and clean so i don't need to touch up any paint if possible. The tile sheets are Honed marble sheets, so it may need a special glue and grout. (i can seal it later) pictures of current kitchen and new tile attached. Please quote on per s m ;)

Require splash back area tiled in the laundry , area is 105cm x 79cm

Fixing kitchen wall splash back

I need to replace damaged toilet bowl and fix/replace the water damage back splashback to a waterproof material.Current one is timber / wood with water damage

Patch 2 small holes from old electrical then tile kitchen splashback. Tiles have been purchased. See photos for area size.

Re-tile a kitchen splashback including a window sill. You will need to remove existing tiles, tile glue etc to get back to bare brick in order that the tiles sit flush with the rendered walls.

I will supply tile Bench top is 2m x 0.6m Subway tiles brick pattern

I need a small area on bathroom wall to be tiled (vanity splashback only). I will provide the tile(s). Vanity and cabinet will be installed on Wednesday, 16Sep. The wall is concrete as this is an old brick building. So we could go either 100x100mm or a single big 300x900mm tile. prefer a single piece but the wall surface may not be smoothly even so let me know if we need to go with smaller tiles. Total area to be tiled is roughly 300x900mm. It’s a corner wall.

Small laundry renovation in Yarrawarrah/Engadine area. Approximate room size 3.2m x 1.5m - porcelain floor tiling required first + removal of existing tiled skirting + new ~100–120 mm skirting cut from the floor tile on exposed walls. Followed by approximately 1.9m² fish-scale mosaic splashback after cabinetry installation. Tiles supplied. Looking for quote for both stages.

The 2 shelves have 5 screw holes and come with screws and plugs. The splashback is a thin sheet of metal with a thick plaster board recessed 2mm behind the splash back and then another fibreboard recessed 2 mm behind the plasterboard. One of the shelves needs to cover over the opening of an electrical switch that if possible be relocated 5-10 cm below it’s current position. Not sure how to secure the fixings in to the splash back - may need liquid nails as well to secure shelf?

Looking for an experienced tiler to install a splashback in my laundry (pictured). I already have the tiles supplied. The wall is currently painted/rendered and will need to be properly prepared and leveled before tiling to ensure a flat, professional finish. Scope of work: * Assess and prepare the wall for tiling * Level and smooth any uneven areas as required * Install supplied tiles across the splashback area * Cut and neatly finish around the existing power point * Grout and clean up on completion I’m after someone who takes pride in their work and can achieve straight lines, even spacing, and a high-quality finish. Please include examples of similar tiling work if available. Flexible on timing, Thank you :)

I have a polymer Splashback from Bunnings, It needs to be cut to size and installed. You will probably need a circular saw, making tape, silicon, liquid nails and measuring tools.

Install splashback 600 x 4650mm kitchen Install splashback 500 x 1200mm vanity Subway tiles are supplied, laid horizontal, while you provide skill and supplies to complete the job.

Tiling of kitchen splash back

I am looking for an experienced tiler to install a kitchen splashback. The area is approximately 3.5 square metres and the surface is prepared and ready for tiling. Pattern of tiles shown in the attached image Area: Approx. 3.5 sqm. tile size : 600 mm x 300 mm Cut-outs: There are 4 double power points/switchboards that require precise cuts. Materials: I will provide the tiles. You will need to provide adhesive, grout, and spacers Apply silicone sealant to the benchtop/splashback join for a waterproof finish.

Hi All Need help with a small bathroom wa tiling, half of the walls are done long time back need to get remaining tiling done , i have the tiles, may be around 5m2 and also to fix the tile on the harage step

I need tiler for 9m² floor and 12m² feature wall/shower plus skirting tile.

There are cracks on the tiles of the bathroom that need to be covered up. Fill in the cracks without using any paint or leaving noticeable patches.

Need two bathrooms to be regrouted and sealed on corners

Need to renovate small bathroom. Strip out, remove existing floor and walls tiles and retiling. All electrical and plumbing connections remain the same. No redesign. Replace old for new

Looking for a tiler for a bathroom renovation, •• Floor: 3.5 m² — 600 × 600 tiles. • Walls: 10 m² — 600 × 600 tiles around the perimeter of the room, up to 1200 mm high. • KitKat tiles above the 1200 mm perimeter tiling, continuing up to the ceiling. • Strip drain. • Niche with mitred edges. • Shelf wall with a mitred edge. Have another 4 bathrooms to do this years aswell

Bathroom room tile broken needs to be replaced

Hi there I was wondering if I could get a quote on a small bathroom strip out, I’m a builder. All plumbing will be disconnected. The bathroom is 1.7metres x 1.8metres. These are the pictures of existing if you can price for removal of shower screen, shaving cabinet, toilet, vanity, wall tiles not floor to ceiling, floor tiles and bed, there’s is one flight of stairs, job is at Wollstonecraft.

Around 5 tiles have lifted from the bathroom floor. I need someone to professionally stick them back down

We have some broken tiles and some that need removing this occurred when we removed sink and vanity and need 10 tiles replaced, we have the tiles

Looking for an experienced tiler to complete a small bathroom refresh by tiling over part of the existing tiles. Scope Approx. 6–7m² total: • Shower walls to approx. 1.35m high: 2.4m² • Shower floor: 1.2m² • Main bathroom floor: 4m² • Proposed tiles approx. 450 x 450mm Existing Condition Existing tiles have previously been painted and paint is now peeling/failing, particularly in wet areas. Remaining painted wall areas outside the nominated areas will stay as-is. Photos show current condition. Work Required • Prepare existing surfaces appropriately for tiling over, including failing paint • Tile nominated shower walls, shower floor and bathroom floor • Allow for existing shower lip/step • Grout/seal appropriately for wet areas • Remove and reinstall glass shower screen • Remove and reinstall toilet for floor tiling • Adjust floor waste/drain and shower fittings/taps as required for additional tile height • Tile up to existing vanity, which will remain in place • Install appropriate transition trim at doorway If licensed plumbing is required, I can arrange this separately. Site Inner West Sydney. Single-level home, corner block with easy access. Existing fixtures and vanity remain. Timing Flexible, ideally within 2–4 weeks. This is a cost-conscious bathroom refresh, not a full renovation. Looking for a neat, functional and durable result and open to recommendations on the most practical approach. Photos should be sufficient for an initial quote, with site visit available if required. Please include: proposed approach, similar work/photos, availability and indicative cost/inclusions.

The 3x bathroom tiles were loose from the wall. They need to be reglued and fixed on 01/10/26 and has to be exact this date.

Looking for a tiler to do bathroom tiling for me - I have a number of bathroom renovations to do before the end of the year - all bathrooms are different - most around 5s2 floor and around 20/25s2 on walls - some will have mitre some have trim finish all very different - work is around northern beaches and north shore

Looking for an experienced handyman/painter to complete two small home maintenance jobs – a bathroom tile refresh and kitchen skirting/kickboard painting. 1. Bathroom tile grout refresh Refresh the white grout between the existing bathroom floor tiles. The floor is approximately 1.5m × 2.5m (3.75m²) with small square tiles. This is a cosmetic grout refresh, applying fresh white grout over the existing grout lines to brighten and freshen their appearance. This is not a full regrouting job. The shower has been done about 6 weeks ago with same solution and looks good. I will have the floor pre-cleaned ready for you. I only need the white grout applied neatly over the existing lines with excess cleaned from the tiles. I will supply: Dunlop Ready-to-Go White Coloured Grout 800g Grout smoothing/application tool 2. Kitchen skirting/kickboard paint over in white approx 2 meters x 15cm tall. Paint the existing grey skirting/kickboard along the bottom as shown in the photo. Paint and undercoat with brush and tray supplied including masking tape. Tasker to bring: Bucket Sponge/cloths Any other basic equipment required to complete. Photos show both areas and their current condition. Please only comment if you are interested in the job. Location: Concord NSW 2137

I leant on my vanity and the tiles came away one cracked. Needs fixing please. We live in a rental. Looking to fix the seal at the very least.

Budget: is listed as 50 but give me an honest quote based on job description Title: Professional Bathroom Tile Painting – Entire Bathroom (Walls & Floor) Description: I’m looking for an experienced tile painting/refinishing professional to repaint all tiles in my bathroom, including the wall tiles, floor tiles and shower tiles, in a natural white finish. I’m after a high-quality, durable finish using the correct preparation, primers and epoxy/two-pack coatings suitable for wet areas. This is not a DIY paint job—I’m looking for someone with proven experience in tile refinishing. The job includes: * Thorough cleaning and preparation of all existing tiles. * Sanding/etching as required. * Priming with the correct tile primer. * Painting all wall, floor and shower tiles in a natural white. * Sealing/top coating where required for a long-lasting finish. * Neat masking and protection of surrounding surfaces. * Leaving the bathroom clean on completion. Please provide: * Photos of previous bathroom tile painting/refinishing work. * Your total quote, including all materials. * Your availability. * Warranty details if you offer one. I’ve attached photos of the bathroom so you can accurately quote the job. I’m looking for someone who takes pride in their work and can achieve a professional, modern finish that will last.

Remove the old grouting in a bathroom over a bath/shower. Replace with new grouting. Corner area under the shower, approximately 1.5sqm area.

Hi there! We’ve had our toilet replaced and the tiles need to be filled in. We do not have the tiles - so price would be to source exact matching tiles and do the job! Keen to go ahead asap!

Replace 3 bathroom tiles. I have the tiles. You remove the damaged tiles, cut and install the new ones. I will finish the job - ie grouting and sealing. So only one visit. $100 per tile - $300

Bathroom demolition. Tiles and fittings removal