Find a professional tiler near you

Double Garage approximately 35 SQM. Currently epoxy done however it is damaged. Need to get the tiling. Please provide price including material and tiles

Tiler Needed – Porcelain Floor Tiling for Sunroom (~19.5m²) Budget is indicative only of happy to consider reasonable quotes based on below scopes! Looking for an experienced tiler with attention to detail to tile our enclosed sunroom. Area: approx. 7.2m × 2.7m (19.5m²) Existing floor: concrete slab, appears generally sound/level. Tiles: 200 × 1200mm rectified wood-look porcelain. We supply: tiles (incl. ~10% extra) and grout. Required work: • Inspect slab before commencing and prepare/clean as required • Lay tiles lengthways along the 7.2m direction • Approx. 1/3 / natural stagger – no 50% brick bond • Narrow, consistent grout joints, preferably 1.5–2mm, subject to manufacturer requirements/tile tolerances • Use appropriate tile levelling system (TLS) for long-format porcelain • Careful set-out for a balanced layout, avoiding unnecessarily narrow cuts • Flat/even finish with minimal lippage • Grout completed floor • Appropriate perimeter/movement joints and flexible sealant where required • Clean, straight cuts and neat finishing around walls and existing aluminium sliding-door frames/tracks • Supply/install suitable transition/edge profile where required • Final clean-up Quote to include: labour, suitable porcelain adhesive, primer, TLS/spacers, flexible sealant, transition/edge profile if required, standard consumables and tools. If significant levelling, crack repair or substrate work is required after inspection, please advise and quote separately before proceeding. Quality finish is important, particularly tile alignment, consistent joints, minimal lippage and neat cuts/finishing. Please advise your experience with long-format porcelain tiles and provide photos of similar work if possible. Budget is indicative only – happy to consider reasonable quotes based on the above scope

I need bathroom floor tiling, no walls. Can make grout myself as an option if it is easier for you. Waterproof applied, shower will be walk in so a gentle slope to drain is needed. It is about 8m2 volume. Standard square floor tiles, see pictures attached. Tile glue is yours. Please send your quote and day you can make this job, Thanks!

I want to pave tiles in my Alfresco. Currently it has a brick floor, tiles to be laid on top of that.

I need tiling done under the pergola area, with some edges lifted on the wall around the area. Tiles and material supplied.

Tile front porch & back door steps. Must have tiling experience. I will supply all tiles only. Please supply glue required. Front approx 1.3x1.3 plus 4 steps. Rear 3 steps not very big.

Floor tiling in 3 bedrooms. Approximately 30-40sqm

Tiling entry and two steps. 600x600 tiles and L shaped trim angle supplied. Old paint might need a light grind. Approx 3.5 Sq M

I need the flooring of the main living/dining and kitchen tiled. Approximately 40m squared. I can supply tiles and grout. Tile size is going to be 600-600.

We have an issue with water pooling at the floor of our main bathroom shower. I’d love to hear what options are available and what the most cost effective method would be to rectify this.

9sqm of floor tiling for laundry plus tile skirting. I will supply tiles and grout. No demo required. 300x600 tiles. Ready to start.

Replace small section of floor tiles 1.4m x 2.6m Existing tiles need to be removed We have replacement tiles (600x300) and grout.

I wanna tile Livingroom, corridoor, and two bedrooms (total 64sqm including 10% extra) and 2 bathrooms floor (total 11sqm including 10% extra. The tile will be on me. Their size for the livingroom and bedrooms and corridor is 60*60. And for bathrooms is 30*60 For the bathroom the tiles to be glued over the existing tiles. so, no need to tough the pipe or underneath things. The current floor for livingroom and corridors is timber and for the rooms is carpet . I will remove them. Just 8sqm tile is in the living room to be removed either you remove them or I will organise someone to remove. Note this is a unit apartment and I need to get the Starat’s approval. They have asked for defining the scope of work and the license for doing the job. Many units are doing this job so it is quite straightforward process for strata approval. Please first come to give me an accurate quote.

laundry toilet and linen press 2.5 mtrs by 3 mtrs

Floor Tiling Job Looking for a reliable and experienced tiler for floor tiling work in Pakenham. Areas to be tiled: * Entry * Hallway * Living area * Kitchen * Laundry Total area is approximately 50 m². Tiles will need to be laid professionally, including preparation, adhesive, grout and finishing. Please provide your quote and availability. Please contact me with your price and previous work/photos if available.

5 foot by 3 foot area in kitchen to be tiled. The old tiles are gone and l have new tiles. Goes right up against dishwasher and cupboards so some tile cutting required.

I’m looking for an experienced tiler to lay new porcelain floor tiles directly over the existing mosaic bathroom floor tiles. The bathroom floor area is less than 10 m². The existing floor tiles are sound and reasonably flat. I would like to avoid removing the existing tiles if possible, so I’m specifically looking for someone experienced in tiling over existing tiles. Work required: * Inspect existing tiles and confirm they are suitable for tiling over * Prepare and clean the existing tiled surface * Apply appropriate primer/adhesive for tiling over existing tiles * Supply and install new porcelain floor tiles * Grout the new tiles * Silicone/seal around appropriate edges and fixtures * Leave the bathroom clean and tidy Tiles: I can supply the new tiles? Area: Less than 10 m² Location: Clayfield I have attached photos showing: 1. The existing bathroom floor 2. The preferred light-grey porcelain tile look 3. A visual example of the proposed result I am looking for a neat, professional finish and someone with demonstrated experience laying tiles over existing tiles. Please provide your labour price and advise whether your quote includes primer, adhesive, grout and silicone. I’m happy to discuss the job and arrange an inspection

Need bathroom floor to be tiled with 600X600 tiles. Just tiling, doesn’t need grouting

Floor requires 900mm x 900mm tiling and water proofing so a shower screen can be fitted afterwards. I can provide the tiles for the job

Need someone to do floor tiling around drain and corners. Area is a bit uneven and will need tile cuts. Some tricky parts near edges and drain. Looking for someone with experience and tools. May take longer than expected. Materials should be supplied by tiler.

Looking for someone to repair and rewire two large porcelain lamps, including supplying and fitting all required lamp holders, wiring and electrical components.

Tiler Needed – Porcelain Floor Tiling for Sunroom (~19.5m²) Budget is indicative only of happy to consider reasonable quotes based on below scopes! Looking for an experienced tiler with attention to detail to tile our enclosed sunroom. Area: approx. 7.2m × 2.7m (19.5m²) Existing floor: concrete slab, appears generally sound/level. Tiles: 200 × 1200mm rectified wood-look porcelain. We supply: tiles (incl. ~10% extra) and grout. Required work: • Inspect slab before commencing and prepare/clean as required • Lay tiles lengthways along the 7.2m direction • Approx. 1/3 / natural stagger – no 50% brick bond • Narrow, consistent grout joints, preferably 1.5–2mm, subject to manufacturer requirements/tile tolerances • Use appropriate tile levelling system (TLS) for long-format porcelain • Careful set-out for a balanced layout, avoiding unnecessarily narrow cuts • Flat/even finish with minimal lippage • Grout completed floor • Appropriate perimeter/movement joints and flexible sealant where required • Clean, straight cuts and neat finishing around walls and existing aluminium sliding-door frames/tracks • Supply/install suitable transition/edge profile where required • Final clean-up Quote to include: labour, suitable porcelain adhesive, primer, TLS/spacers, flexible sealant, transition/edge profile if required, standard consumables and tools. If significant levelling, crack repair or substrate work is required after inspection, please advise and quote separately before proceeding. Quality finish is important, particularly tile alignment, consistent joints, minimal lippage and neat cuts/finishing. Please advise your experience with long-format porcelain tiles and provide photos of similar work if possible. Budget is indicative only – happy to consider reasonable quotes based on the above scope

Tiling job - I have a kitchen splashback area (never tiled before) 145.6 x 60 cm approx. I have 2x 120 x 60 x0.8 porcelain tiles and 1× 60 x 30 cm tile. I would like to place one large tile centrally in splashback with 13cm approx pieces on either side. No power points.

We have 2 bathrooms a laundry and a toilet. The tiles we purchased are not porous but have a matte, pitted surface that easily gets dirty and traps soap and grease. The tiles are black porcelain. As a trial we want to seal just our toilet. The toilet is 175cm X 130cm. We have a professional cleaning product and a professional sealing product. See photos. This is what we need: 1) Clean the floor and wall edge tiles. 2) Get rid of a all water stains. 3) Get rid of iron stains. 4) Get rid of grout haze. 5) Seal the black tiles.

endura shed has to be installed on porcelain tiles. I will be with the installer as I will be assembling the storage shelves inside the endura. I a, expecting the assembler to screw the shed to the porcelains.

1. There is a small crack in the bathroom. Need a porcelain repair specialist to fix it 2. There is some mold in the tiles. Need to do mold cleaning and do regrouting.

We need a qualified tiler to pave 112 metres. Price to cover labour and associated costs of adhesive, grout and prep (300x300mm porcelain tiles will be provided) to pave directly over existing terracotta tiles of flat ground level access, 2x long pathways and 2x courtyards.

Tiling of shower floor, 900*1000, over existing tiles, excluding hob, maybe using 600*600 porcelain tiles in Carrara

We need someone to install around 44sqm of porcelain tile flooring. You’ll also need to coordinate with our other installer which will be responsible for the engineered timber section of the apartment, and both floors MUST be of the EXACT same level/height. Porcelain tiles will be installed from the end of the corridor to the living, kitchen, and study area. See floorplan attached. We’d also like a separate quote to remove all the carpet and existing flooring (kitchen and entrance, see photos attached.

Hi, I’m looking for someone experienced in porcelain / ceramic repair, toilet bowl surface repair or resurfacing to assess and repair a small damaged/stained area inside a toilet bowl in Docklands VIC 3008. There is a small localised yellow-brown/dark brown mark at the bottom of the toilet bowl. It visually looks like dirt/waste, but it is not waste and does not flush or wash off. it appears that the area may be: * rust or mineral staining; * staining embedded in damaged porcelain glaze; or * localised wear/damage to the glazed surface. The toilet itself is otherwise fully functional. I am therefore specifically looking for someone who has experience repairing or resurfacing porcelain in this location, if it can be done reliably. I would prefer to repair the existing toilet rather than replace the complete toilet, as replacement would be considerably more expensive. Please let me know: * whether this type of repair is something you can undertake; * what repair/resurfacing method you would use; * whether the repaired area will withstand permanent water exposure and normal toilet cleaning

Fix chipped porcelain sink

Looking for an experienced tiler to screed and tile my outdoor courtyard (approx. 12m²). The existing interlocking timber deck tiles will be removed before work commences (or happy for you to quote separately for removal). I have already purchased the 300 × 300 Travertine White rectified porcelain tiles. The existing concrete slab is uneven and not smooth, so it will need to be professionally screeded and levelled before the tiles are laid. The area is an irregular shape with one angled edge (see photos) and is a covered outdoor courtyard. Scope of work Inspect existing concrete slab. Screed and level the slab. Ensure correct falls are maintained for drainage. Supply all required materials including primer (if required), screed, outdoor tile adhesive, grout and silicone. Lay approximately 12m² of supplied porcelain tiles. Complete neat cuts around the doorway and edges. Grout, silicone and leave the area clean on completion. Please include: Your total quote (including screeding and tiling). Availability. Photos of similar outdoor tiling work. Any recommendations after reviewing the photos.

There is a crack in my bathroom porcelain sink that needs to be repaired. I have tested water and nothing drains through to the other side.

Need to replace 9 pc of broken porcelain tiles in kitchen floor. Tile size 297x297mm. I have replacement tiles. However, tiles size is 300x300mm. Alternatively, I can get 298x600mm for cutting to size. I need professional to help me with this.

I have 2 shack wooden beside tables that we want to put stone tops on to “renovate” them. I have specifications for the task and will provide the porcelain

Ive got 2 wall sconces i need hung on a bathroom wall. The wall is tiled with porcelain tiles so ill need someone who has experience with drilling holes to that material. Theres no wiring. This job is purely attaching them because theyre wireless. There are 2 lamps with 2 anchored screws each. Im not sure if theres piping behind the wall thatll need to be avoided. Thank you

Looking for an experienced tile specialist to deep clean and seal grout across my living room, kitchen, and hallway floor. Tile & Floor Details: White marble-patterned porcelain tiles with a matte (non-shiny) finish. Very narrow/tight grout joints that have darkened with dirt. Scope of Work: Deep clean and scrub all grout lines back to their original light color using proper cleaning agents and narrow brushes. Allow grout to dry fully. Apply a water-based, penetrating (impregnating) sealer with zero sheen / natural finish (e.g., Aqua Mix or equivalent). CRITICAL REQUIREMENT: NO topical coatings, gloss, or wet-look sealers. Because the tiles are matte, I do not want shiny lines or film residue left on the grout or tile face. All excess sealer must be wiped clean off tiles immediately during application. Please answer when bidding: What equipment/products do you use for deep cleaning narrow grout? What specific brand of natural-look penetrating sealer will you use? Are you open to doing a 1-foot test patch first to confirm a 100% matte result?

I have a small chip in a white bathroom vanity basin/surface that I attempted to repair using a porcelain repair kit. Unfortunately too much filler was applied and the repair area is now more noticeable than the original chip. I’m looking for someone experienced with porcelain/ceramic/bathroom vanity repairs (bath resurfacing, enamel touch-up, chip repair etc.) to properly smooth, blend and refinish the area so it looks neat and discreet. The original damage was very small, and I’d prefer someone who has done similar vanity/basin repairs before rather than general handyman work. Please let me know your experience with porcelain or enamel repairs and what approach you’d take.

Need someone to cut porcelain tile for me

Shower has a porcelain shelf which has smashed but still attached to one of the tiles. Looking for someone to fix the tiles and attach another shelf

Area of approximately 5.1 m2 Kitchen and laundry current splashbacks to be removed and new tiles purchased to be laid.

Tiling job - I have a kitchen splashback area (never tiled before) 145.6 x 60 cm approx. I have 2x 120 x 60 x0.8 porcelain tiles and 1× 60 x 30 cm tile. I would like to place one large tile centrally in splashback with 13cm approx pieces on either side. No power points.

Need someone to do some tiling for kitchen splash back. See photos attached

Tiling of kitchen & laundry splash back walls

Caulk euro laundry and kitchen splashback. I can supply materials

Supply and install cabinetry to kitchen splash back. Match colour of existing cabinetry. Centre cabinet for built in rangehood. Cabinetry to be 300 deep, approx 4 sets of 40cm doors.

Removal of kitchen splash back tiles 2.9meters by 60cm high and another 60 by 60cm area . Looking for good deal

Need my kitchen backsplash tiled

300x600 tiled splash back. About 3mtrs

Removed splashback tiles from kitchen and 1 layer of plasterboard came off with it (see pictures). Need new plasterboard installed by qualified tradesperson. Approx 5m x 0.6m plasterboard required. Must be ready for splashback tiling after. Needs to happen before kitchen installation Monday 31 August.

Small laundry renovation in Yarrawarrah/Engadine area. Approximate room size 3.2m x 1.5m - porcelain floor tiling required first + removal of existing tiled skirting + new ~100–120 mm skirting cut from the floor tile on exposed walls. Followed by approximately 1.9m² fish-scale mosaic splashback after cabinetry installation. Tiles supplied. Looking for quote for both stages.

Qualified electrician to remount three power sockets and rangehood following splash back installation. Everything provided. Just need everything put back - pictures show the work required

Plumber or handyman to come and take off my gooseneck tap so the splashbacks can go on tomorrow. Must be done on 5 August

My kitchen splashbacks are being installed On 6 August. I must get a suitably qualified tradesperson to temporarily remove my PowerPoints and lower the gooseneck tap so that the glass can be fitted without obstruction. I then need the PowerPoints And tap refitted at a later date

Looking for an experienced tiler to tile laundry splashback. This includes the wall area directly above the sink, ending at the overhead cabinets, and the small area of wall to the left of this which is not visible in pics. The entire area that needs to be tiled is just under 1.5m2. The tiles are pictured (the shorter one circled in red) for reference.

The current splashback is 292cm X 300cm X 86cm. The height of the tile splashback is 30cm. What I need it a tiler to come in, rip out the old tiles and replace with new ones. Obviously would have to also temporarily work around and cut holes in the tiles for the electrical outlets. Would need them drilled back into the wall at the end of the job so it all looks nice and functional. I can supply tiles, just 30x60cm white gloss ceramic tiles from Bunnings.

Looking for a tiler to install a kitchen splashback in St Kilda. Approx. 2 m² splashback. Tiles and grout supplied: 75 × 150 mm Cottage Subway White Gloss subway tiles. Standard brick pattern with even grout lines. The kitchen has already been installed and is ready for the splashback to be tiled. Please include all labour, adhesive, trims, caulking and any other finishing materials required in your quote. Must have experience with kitchen splashbacks and deliver a clean, high-quality finish.

75x300mm subway tiles to be install on two walls one of approx 1800mmx 570 and the other 3000mm x 570mm. plus a small one of approx 600x 570mm. please submit quotes

Looking for a qualified tiler to supply and install a kitchen splashback. • White porcelain or marble-look tiles preferred (open to recommendations). • Splashback required behind the sink (2 m) and behind the cooktop (1.93 m), approximately 600 mm high. • Total splashback area is around 3 m². • Existing splashback has been removed and the new stone benchtop is already installed. • Please include wall preparation (if required), adhesive, grout, trims, cutting around power points, and installation. • Please provide a fixed quote and earliest availability.

Looking for a tiler to tile my kitchen splashback. Tiles to go to rangehood/overhead cupboards on one side of the kitchen and 3x rows over the sink on the other. Tiles are 100x100 and will be provided. Availability for Thursday or Friday this week.

Change bathroom tiles grout and silicone sealant

Wanting a cost to water proof my bathrooms and tile them wall to floor with 600x600 with Matt tiles and a small feature wall above my vanity 900cm and a 600 vanity with a different tile. Measurements for 1 bathroom is 2.4 x 4.0 Wall height 2.7 ENSUITE 1,4x3.0 Wall height 2.7 Located in Rye Victoria

Two bathroom floors and walls resurfaced Kitchen splash back resurfaced

Require a handyman with ABN to: Replace kitchen tap Secure loose wall tiles around bath and vanity kickboard Refer pics

Need a small patch of bathroom tiles resealed, just the edges.

Hi we are needing our small bathroom tiled with 400x400mm floor tiles. We are doing the wall tiles ourself

I have two cracks in tiles of shower floor and need them fixed - properly, but as cheaply as that can be done. Needs to be fully waterproofed obviously.

Place new tiles on shower curb.

Looking for an experienced handyman/painter to complete two small home maintenance jobs – a bathroom tile refresh and kitchen skirting/kickboard painting. 1. Bathroom tile grout refresh Refresh the white grout between the existing bathroom floor tiles. The floor is approximately 1.5m × 2.5m (3.75m²) with small square tiles. This is a cosmetic grout refresh, applying fresh white grout over the existing grout lines to brighten and freshen their appearance. This is not a full regrouting job. The shower has been done about 6 weeks ago with same solution and looks good. I will have the floor pre-cleaned ready for you. I only need the white grout applied neatly over the existing lines with excess cleaned from the tiles. I will supply: Dunlop Ready-to-Go White Coloured Grout 800g Grout smoothing/application tool 2. Kitchen skirting/kickboard paint over in white approx 2 meters x 15cm tall. Paint the existing grey skirting/kickboard along the bottom as shown in the photo. Paint and undercoat with brush and tray supplied including masking tape. Tasker to bring: Bucket Sponge/cloths Any other basic equipment required to complete. Photos show both areas and their current condition. Please only comment if you are interested in the job. Location: Concord NSW 2137

Title removal and possibly assistance with tiling. It is a small shower area 1000 by 1000. Floor toiles and wall tiles must be removed. I can provide tools if need be. I will dispose of rubbish myself simply just looking for a labor. I run a busy handyman business. Based in Fremantle if this job goes well there is a good opportunity for further work If you are interested

Looking for someone to complete a demolition and waste removal job for a 6m2 room in Success.The task includes:Tile Layer Removal: Fracturing and popping the top surface finish away from the floor bed.Screed Bed Demolition: Jackhammering the thick underlying sand-and-cement mortar bed right down to the solid concrete slab.Waste Removal & Clean Up: Shoveling, clearing, and loading all the rubble into your own vehicle/trailer and carting it away.also remove toilet and plug it

Bathroom tile and wall repair needed. A few tiles near the shower are lifting away from the wall, grout is missing in places along the top row and a corner, and there’s cracked plaster above the tile line. Looking for someone experienced to fix. Photos attached.

Need the soup basin on side of shower replaced

An Experienced Tiler needed for a quick repair job. We need one soap holder to be replaced without affecting the surrounding tiles and regrouting around the new soap holder. Replacement Soap Holder provided. We’ll need you to bring your tools and grout please.

I leant on my vanity and the tiles came away one cracked. Needs fixing please. We live in a rental. Looking to fix the seal at the very least.

Looking for an experienced handyman to install a few bathroom accessories. * Install 2 × 80cm towel rails - Bath 1 * Install 1 × 60cm towel rail - Bath 2 * Install 2 × robe hooks - Bath 1 All accessories will be supplied. Everything is being installed onto bathroom tiled walls, so looking for someone experienced drilling into tiles with the right tools to avoid chipping or cracking.

Budget: is listed as 50 but give me an honest quote based on job description Title: Professional Bathroom Tile Painting – Entire Bathroom (Walls & Floor) Description: I’m looking for an experienced tile painting/refinishing professional to repaint all tiles in my bathroom, including the wall tiles, floor tiles and shower tiles, in a natural white finish. I’m after a high-quality, durable finish using the correct preparation, primers and epoxy/two-pack coatings suitable for wet areas. This is not a DIY paint job—I’m looking for someone with proven experience in tile refinishing. The job includes: * Thorough cleaning and preparation of all existing tiles. * Sanding/etching as required. * Priming with the correct tile primer. * Painting all wall, floor and shower tiles in a natural white. * Sealing/top coating where required for a long-lasting finish. * Neat masking and protection of surrounding surfaces. * Leaving the bathroom clean on completion. Please provide: * Photos of previous bathroom tile painting/refinishing work. * Your total quote, including all materials. * Your availability. * Warranty details if you offer one. I’ve attached photos of the bathroom so you can accurately quote the job. I’m looking for someone who takes pride in their work and can achieve a professional, modern finish that will last.

Tile behind shower. 900x900x2100 Tiles are 300x600 No waterproofing. Not a perfect jobs needed. Temporary shower

In need of a tiler that can assist with some renovations in my bathroom, works required: - Supply & build shower base 900 x 900 - Tile bathroom (approx 12m2) - Tile toilet (approx 1.4m2) Waterproofing and plumbing rough in already complete, obviously the shower base will need waterproofing. Plumbing fit off not required. Looking for someone reasonable & trust worthy who is reliable. There will be on going future works with another bathroom and laundry renovations happening in the future aswell.

Remove the old grouting in a bathroom over a bath/shower. Replace with new grouting. Corner area under the shower, approximately 1.5sqm area.