Find professional pool maintenance in QLD

Repair/ Replace MPV for Pool Sand Filter 25” Model: King P625 (25”) / Emaux There is a leak / crack where the pressure gauge is on the MPV and needs to be fixed. The pressure gauge area on the multiport valve housing appears to be cracked. I’ve already replaced the pressure gauge adaptor and O-ring, but it’s still leaking. Looking for an highly experienced pool equipment technician or pool service technician. Who have work on: * Sand filters * Multiport valves (MPVs) * Pool pumps * Chlorinators * Filter media

need an actual poor person to fix the pool there a few holes in the turf what needs to get this pool ti be filled up

Looking for a pool specialist or plumber to locate and repair a pool water leak. The pool water level is dropping rapidly and constantly needs topping up.

Hi there, ​I looking for someone to either repair or supply/install a cheap replacement for my leaking pool filter. The setup is a Hayward Pro Series S244TLV sand filter servicing a 6m x 4m pool. ​The Issue: There is a slow leak on the top side seam of the tank, losing about 5L of water per day. I have already attempted to seal the exterior with epoxy, but the water pressure is still pushing through. ​The Goal: I am planning to move in the next 12 months, so I am looking for the most cost-effective solution possible. I am open to two options: ​-A reliable, temporary/mid-term repair to the existing tank if you have proven experience fixing cracks/seams on these specific high-pressure plastic/fiberglass models. ​- A 25 inch budget-friendly replacement filter (new or secondhand/refurbished ok) including installation and removal.

I would like to know how much it could be to replace or repair the pool pump cover

My pool vacuum cleaner doesnt move, it just stays in the one spot idling. I need it fixed or replaced, will pay for a new model with your guidance.

Blow up spa has small slow leak from piping out back together - need it fixed plz

Empty pool, acid wash, replace 3 x eyeball outlets and main drain. Pool is 7 x 3.5 with depth of 1m to 1.8m.

Spa showing h20 error message

Spa controller not working I got it second hand was working for a while

The Pebblecrete has lifted away on a small section on the outside of my pool… the pool is approximately 30 yrs old

My pool pump is leaking from two different locations. To me it looks like the Black valves have cracked over time and need replacing I currently can’t turn my pool on because all of them seem to be leaking Located in Palm Beach We currently don’t have a pool pump protector over it which I think is the plastic pipe to wear

Spa cuts out after a short time in use

Swimming pool fix been leaking

Pool not sucking properly and now no power to pump. Need a quote $50 for quote

I need two cracked pool pipes either repaired or the impacted sections replaced. The pool has been drained, so there is no water flowing. Pipes are about 30mm wide.

Hi We just moved into this house with a pool in need of repair. We aren’t really sure what needs doing to get it up to speed. The pool is about 9m x 4.5 There is rust affecting the structure of the fibreglass (or possibly fibreglass) pool, located on the outer area. The pool is currently empty of water. We’d love some guidance and quotes as keen to get it up to speed. Cheers

Need to fix the pool , wants to clean the pool and next to change the motor

swimming pool guys cleaning the pool and drain some water and found neighbor back yard area a bit flooded ,suspecting the drainage pipe broken , need plumber to check and repair where needed

Pool pump has a small damaged section of 50mm pipe that needs replacing. Damaged piece needs to be cut out and new pipe put in. Probably no more than 200mm length. We will supply the 50mm pipe and couplings, along with primer and glue.